Description | Strong zippered carrying bag specially developed for easy transport of your PIHER Multiprops telescopic supports.
The small model has a capacity of maximum 5 pieces of Multiprops P1, P2 or P3.
The larger model has a capacity of maximum 4 pieces of Multiprops P1, P2, P3 or P4. | Two Multiclamps connected by the screw thread of 360 ° rotatable Multiclamp.
The angle is fixed by tightening the wing nut. | Sturdy support specially developed for all PIHER Multiprops.
The tripod has a loading capacity of up to 300 kg and is made of steel pipes and profiles. This new model has a handy installation with a click system to set up and dismantle very quickly. | Handy set of two fixed feet for mounting on the PIHER Multiprops.
Made entirely of steel with mounting holes of 4.9mm and 6.5mm for easy attachment to various materials.
The feet have a diameter of 75mm.
This set provides a lot of stability for your Multiprop, for example, to make leveling a wall cupboard easier. | Holder for smartphone. Fits all universal holders from Piher.
Made of ABS plastic with rubber protected contact surface so it does not damage your device.
Minimum opening 5cm, maximum opening 8,5cm. | This set contains two threaded adapters for use on the PIHER Universal Holder (34061).
5/8 "and 3/8" adapters made of brass. |
Content | Strong zippered carrying bag specially developed for easy transport of your PIHER Multiprops telescopic supports.
The small model has a capacity of maximum 5 pieces of Multiprops P1, P2 or P3.
The larger model has a capacity of maximum 4 pieces of Multiprops P1, P2, P3 or P4. | The Multiclamp is designed for use with the PIHER Multiprops telescopic supports, but can of course also be used separately.
Within a few seconds the Multiclamps are screwed onto the telescopic supports and immediately loadable up to 150kg.
Two Multiclamps connected by the screw thread of 360 ° rotatable Multiclamp.
The angle is fixed by tightening the wing nut.
The Multiclamps fit on all types of Multiprops or on other pipes and profiles of 18-48mm. You can also use them as a separate small clamp.
Made entirely of nylon fiberglass. Steel screw, shaft and reinforcements. Equipped with anti-slip pads.
They have different screw holes so you can mount them on any surface.
Another PIHER product with endless possibilities. | Sturdy support specially developed for all PIHER Multiprops.
By using this support you can also place a Multiprop when there is no surface at the top.
For example, place a laser on the Multiprop in the middle of an open building.
The tripod has a loading capacity of up to 300 kg and is made of steel pipes and profiles. This new model has a handy installation with a click system to set up and dismantle very quickly. | Handy set of two fixed feet for mounting on the PIHER Multiprops.
Made entirely of steel with mounting holes of 4.9mm and 6.5mm for easy attachment to various materials.
The feet have a diameter of 75mm.
This set provides a lot of stability for your Multiprop, for example, to make leveling a wall cupboard easier. | This holder allows you to provide a sturdy support for your smartphone on the craziest places.
Holder for smartphone with 1/4 "thread and thus fits all universal holders from Piher.
Made of ABS plastic with rubber protected contact surface so it does not damage your device.
Minimum opening 5cm, maximum opening 8,5cm. | This set contains two threaded adapters for use on the PIHER Universal holder (code 34061). 5/8 "and 3/8" adapters made of brass.
|
Reviews
There are no reviews yet.