Deze frees is geschikt voor het maken van zwaluwstaartverbindingen. Zwaluwstaartverbindingen zijn klassieke, maar ijzersterke mechanische verbindingen om te gebruiken in houtbewerking. Gebruik deze verbindingen om kasten, lades, kisten of andere hoekverbindingen te vervaardigen. Dankzij de hardmetalen (widia) snijvlakken is een precieze en nette afwerking van uw freeswerken te allen tijde gegarandeerd.
Om sneller en efficiënter te werken kan u gebruik maken van een mal voor zwaluwstaartverbindingen.
Practical and reliable support that makes it possible to install panels, doors, etc... to be held in place. For pieces with a maximum thickness between 6mm and 80mm. Thanks to its robust design, the SP270R easily supports pieces up to 80kg. The support is very easy to use. Secure your piece by placing it in the clamp and pressing it down. To unload it again, use the foot pedal.
Tenon gabarit TJ-85 pour les scies à table Itamac Panthera (Harvest) HW110SE.
Idéal pour scier des tenons, etc.
SHOWROOM MODEL, colours 2022
The Air Flux Cyclone Pro series 3500 easily distinguishes itself thanks to its unique performance. It comes with a powerful engine (4HP), compared to its competitors (maximum 3HP). Noise pollution is kept to a minimum thanks to the dynamically balanced rotor blade. The rotor blade is designed entirely in metal, with a minimum thickness of 3mm.
The closed housing is made of 1.2 mm thick sheet steel with an attractively applied powder coating. This closed housing provides optimum protection for the filters. The waste is collected in a removable, movable metal container. This reduces the disposal of waste to a simple and safe operation. The waste containers are equipped with an easy-to-unlock handle and a visual inspection window. The mobile waste container has a capacity of 380 litres.
The wide inlet (200 mm) makes the extractor particularly suitable for integration with systems that generate a high air flow.
More than 99% of wood and dust particles are filtered from the air flow. High-quality cartridge filters with PTFE membranes are used. Larger chips end up in the collection barrel, remaining dust particles go into the filter cartridge. Here the dust is filtered again to 0.4 microns.
This unit is suitable for mixed dust and chips from solid wood machinery and fine dust in non-professional production environments.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Set profielmessen hoogte 40mm Nr. 0091 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 40mm Nr. 0006 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Black PVC dust hood with outlet diameter 100mm to be used with the Air Flux dust extractors. The size of the dust cap mouth is 415x325mm.
Zaaglint met lengte 4670mm om te gebruiken op de TT50BS of TT61BS lintzaagmachine van Tendotools. Dit zaaglint beschikt over 4 TPI (tanden per inch) en heeft een breedte van 20mm. Dit zaaglint in gehard staal "Flexback" is erg geschikt voor multifunctioneel zagen. Gebruik dit zaaglint zowel voor hout als voor plastics. De tanden van het zaagblad kregen een extra thermische behandeling voor verhoogde hardheid. Hierdoor blijft de band erg soepel en verhoogt uw zaagcomfort dankzij de hardheid van de tanden.
Set profielmessen hoogte 40mm Nr. 0020 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Content
Deze frees is geschikt voor het maken van zwaluwstaartverbindingen. Zwaluwstaartverbindingen zijn klassieke, maar ijzersterke mechanische verbindingen om te gebruiken in houtbewerking. Gebruik deze verbindingen om kasten, lades, kisten of andere hoekverbindingen te vervaardigen. Dankzij de hardmetalen (widia) snijvlakken is een precieze en nette afwerking van uw freeswerken te allen tijde gegarandeerd.
Om sneller en efficiënter te werken kan u gebruik maken van een mal voor zwaluwstaartverbindingen.
Practical and reliable support that makes it possible to install panels, doors, etc... to be held in place. For pieces with a maximum thickness between 6mm and 80mm. Thanks to its robust design, the SP270R easily supports pieces up to 80kg. The support is very easy to use. Secure your piece by placing it in the clamp and pressing it down. To unload it again, use the foot pedal.
Tenon gabarit TJ-85 pour les scies à table Itamac Panthera (Harvest) HW110SE.
Idéal pour scier des tenons, etc.
The Air Flux Cyclone Pro series 3500 easily distinguishes itself thanks to its unique performance. It comes with a powerful engine (4HP), compared to its competitors (maximum 3HP). Noise pollution is kept to a minimum thanks to the dynamically balanced rotor blade. The rotor blade is designed entirely in metal, with a minimum thickness of 3mm.
The closed housing is made of 1.2 mm thick sheet steel with an attractively applied powder coating. This closed housing provides optimum protection for the filters. The waste is collected in a removable, movable metal container. This reduces the disposal of waste to a simple and safe operation. The waste containers are equipped with an easy-to-unlock handle and a visual inspection window. The mobile waste container has a capacity of 380 litres.
The wide inlet (200 mm) makes the extractor particularly suitable for integration with systems that generate a high air flow.
More than 99% of wood and dust particles are filtered from the air flow. High-quality cartridge filters with PTFE membranes are used. Larger chips end up in the collection barrel, remaining dust particles go into the filter cartridge. Here the dust is filtered again to 0.4 microns.
This unit is suitable for mixed dust and chips from solid wood machinery and fine dust in non-professional production environments.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Set profielmessen hoogte 40mm Nr. 0091 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 40mm Nr. 0006 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Black PVC dust hood with outlet diameter 100mm to be used with the Air Flux dust extractors. The size of the dust cap mouth is 415x325mm.
Zaaglint met lengte 4670mm om te gebruiken op de TT50BS of TT61BS lintzaagmachine van Tendotools. Dit zaaglint beschikt over 4 TPI (tanden per inch) en heeft een breedte van 20mm. Dit zaaglint in gehard staal "Flexback" is erg geschikt voor multifunctioneel zagen. Gebruik dit zaaglint zowel voor hout als voor plastics. De tanden van het zaagblad kregen een extra thermische behandeling voor verhoogde hardheid. Hierdoor blijft de band erg soepel en verhoogt uw zaagcomfort dankzij de hardheid van de tanden.
Set profielmessen hoogte 40mm Nr. 0020 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Weight
0,05 kg
3 kg
5 kg
150 kg
0,05 kg
0,05 kg
0,05 kg
1 kg
0,5 kg
0,05 kg
Dimensions
N/B
N/B
N/B
134 × 90 × 220 cm
N/B
0,4 cm
0,4 cm
41,5 × 32,5 cm
N/B
0,4 cm
Additional information
Gewicht
0,05 kg
Diameter
6,4mm
Snijlengte
8mm
Lengte
44mm
Hoek
7°
Snijvlakken
2
Schacht
8mm
Gewicht
3 kg
Max. dikte van het stuk
6-80mm
Max. draagkracht
80kg
Gewicht
5 kg
Gewicht
150 kg
Afmetingen
134 × 90 × 220 cm
stroomvoorziening
16A
maximale luchtstroom
3500m3
Vermogen (motor)
4 HP
totale afvalopslag
380 liter
filteroppervlakte
10m2
filter afmetingen
35 x 108 cm (diameter)
Gewicht
0,05 kg
Diameter
12,7mm
Snijlengte
19mm
Lengte
51mm
Snijvlakken
2
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
1 kg
Afmetingen
41,5 × 32,5 cm
Diameter
100mm
Gewicht
0,5 kg
Lengte
4670mm
Breedte
20mm
Dikte
0,80mm
Gewicht
0,05 kg
Afmetingen
0,4 cm
Meld je aan voor onze nieuwsbrief
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Vergelijken
We gebruiken cookies om ervoor te zorgen dat onze website zo soepel mogelijk draait. Als je doorgaat met het gebruiken van de website, gaan we er vanuit dat je ermee instemt.OkPrivacy policy