Ø 100mm klemband met vlinderknop hebben een duimschroef waarmee u snel en zonder schroevendraaier of sleutel kunt vastdraaien of losmaken. Maakt het opzetten, wijzigen of reinigen van uw stofopvangsysteem eenvoudiger! Voor gebruik met Ø 100 mm afzuigslangen en koppelstukken.
Set van 5 stuks.
Deze staalbandklemmen van PIHER zijn super handig voor montagewerken. Geen nood meer aan verschillende klemmen. Ze zijn voorzien van een extra sterke stalen band (CK67S) met afgeronde hoeken, hierdoor kan de band niet snijden. De klem zelf is gemaakt uit staal met beukenhouten handvat en nylon hoeken. Werken met een staalbandklem zorgt voor nauwkeurige verbindingen en gelijkmatig verdeelde druk. Voor zeshoekige werkstukken.
Porte outils composée de deux éléments en métal léger, équipée de couteaux réversibles en carbure (HW). Ce porte outils a été spécialement conçue pour effectuer des opérations de chanfreinage et d'arrondi avec une grande précision. Convient pour le fraisage de bois d'une hauteur comprise entre 18 mm et 50 mm. Les lames ont un rayon d'une part et un chanfrein de 45° d'autre part. Les lames de rayon R4 sont montées en standard sur le porte outils. Les lames de rayon R2, R3, R5 et R6 sont disponibles séparément.
Comme les couteaux sont placés à la fois au-dessus et en dessous du porte outils, il est possible d'arrondir/chanfreiner votre pièce en un seul passage. Grâce aux lames en carbure de tungstène, cette fraise profilée coupe sans effort les planches ou les bois massifs. Peut également être utilisé sur des plaques.
De tanden van dit zaagblad werden in V-vorm (45°) aangeslepen om gemakkelijk en snel lambrisering te maken met behulp van uw paneelzaag. Op aanvraag kunnen de tanden ook in onder een andere vorm/hoek aangeslepen worden.
Groefzaagblad met widia zaagtanden om groeven te trekken in hardhout, zacht hout, gelamineerde panelen en andere producten op basis van hout. De zaagbladen hebben een asgat van 30mm en zijn ideaal voor gebruik op freesmachines of op zaagtafels.
SHOWROOM MODEL, old colours 2022
The Air Flux3500AS anti fire separator is the newest member in our product range of hoovers. The product is characterised by a compact and efficient design, supported by the 15 filters and the powerful motor unit. This unit was also equipped with a vibrating function to keep the filters clean. The filter cleaning can be operated via the integrated control box. There are no manual steps involved; everything can be set automatically.
This hoover belongs to the noise-absorbing fine dust extractors. In addition, it has been customised for your (compact) CNC milling machine, panel saw or sanding machine.
The closed housing is made of 1.2 mm thick sheet steel with an attractively applied powder coating. This closed housing provides optimum protection for the filters, polyester micron filter bags. The waste is collected in a detachable, mobile metal container. This makes maintenance considerably easier and your working environment more hygienic.
The waste container is equipped with an easy-to-unlock handle and a visual inspection window. The wide inlet (200 mm) makes the extractor very suitable for integration with a system with a high air flow rate. The rotor is dynamically balanced to minimise noise.
The extraction unit was equipped with an anti-fire separator. This unique system significantly reduces the risk of fire and forms a trap for larger pieces of wood waste (larger than 25 x 25). The anti-fire separator proves its worth; your environment becomes safer!
Finally, the aircraft was fitted with a wheel base to ensure easy movement.
Set profielmessen hoogte 50mm Nr. 2013 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Stofhoed in zwart PVC met diameter buis 100mm om te gebruiken in combinatie met de Air Flux stofafzuigingssystemen. De grootte van de opening bedraagt 340x180mm.
Saw blade with 20 teeth
Saw blade with flat, beveled (FZ/FA) teeth and anti-kickback design for cutting slab woods and boards, timber with parts of concrete and metal (nails, metal fittings), porous concrete blocks. For use on table saws.
Met deze V-groeffrezen kunt u diepe en ondiepe V-groeven maken, ideaal voor het maken van belettering, signage of voor decoratieve afwerking op panelen en meubels. Gebruik deze frees zonder risico op verbranding. De frees is verder uiterst geschikt voor het maken van afgeschuinde randen. Het is aangeraden meerdere malen te passeren bij het verwijderen van grote hoeveelheden materiaal.
A set of ten high quality spacers with a tolerance of 0.01. The thicknesses vary between 1mm and 10mm with scale of 1. These rings are available with bore 30mm (Ø45mm) or with bore 50mm (Ø70mm).
Wood lubricant for machine surfaces and machine tables. Significantly improves the sliding of wood over machines in steel, cast iron or aluminium. Ideal for planers, routers, saw tables, etc. Also a great efficiency for sliding wood on wood (wooden guides, extension tables, drawers, etc.). Silicone-free. Can be used on all types of wood without leaving marks!
Advantages: does not damage glued joints, increases safety while working, increases quality of finish, leaves no traces.
Can also be used to restore shine to plastic.
Coffret en cinq parties avec des mèches à façonner à queue cylindrique avec des différentes diamètres de Sistemi Klein. Le set consiste de cinq mèches à façonner de diamètre 15 – 20 – 25 – 30 – 35mm, présenté dans un coffret en bois de haute qualité.
Attention: tous les mèches jusqu'à et y compris diamètre 30mm ont un queue de 8x30mm, la mèche de diamètre 35mm a une queue de 10x30mm.
Content
Ø 100mm klemband met vlinderknop hebben een duimschroef waarmee u snel en zonder schroevendraaier of sleutel kunt vastdraaien of losmaken. Maakt het opzetten, wijzigen of reinigen van uw stofopvangsysteem eenvoudiger! Voor gebruik met Ø 100 mm afzuigslangen en koppelstukken.
Set van 5 stuks.
Deze staalbandklemmen van PIHER zijn super handig voor montagewerken. Geen nood meer aan verschillende klemmen. Ze zijn voorzien van een extra sterke stalen band (CK67S) met afgeronde hoeken, hierdoor kan de band niet snijden. De klem zelf is gemaakt uit staal met beukenhouten handvat en nylon hoeken. Werken met een staalbandklem zorgt voor nauwkeurige verbindingen en gelijkmatig verdeelde druk.
Porte outils composée de deux éléments en métal léger, équipée de couteaux réversibles en carbure (HW). Ce porte outils a été spécialement conçue pour effectuer des opérations de chanfreinage et d'arrondi avec une grande précision. Convient pour le fraisage de bois d'une hauteur comprise entre 18 mm et 50 mm. Les lames ont un rayon d'une part et un chanfrein de 45° d'autre part. Les lames de rayon R4 sont montées en standard sur le porte outils. Les lames de rayon R2, R3, R5 et R6 sont disponibles séparément.
Comme les couteaux sont placés à la fois au-dessus et en dessous du porte outils, il est possible d'arrondir/chanfreiner votre pièce en un seul passage. Grâce aux lames en carbure de tungstène, cette fraise profilée coupe sans effort les planches ou les bois massifs. Peut également être utilisé sur des plaques.
Disponible avec un alésage de 30 mm ou 50 mm.
De tanden van dit zaagblad werden in V-vorm (45°) aangeslepen om gemakkelijk en snel lambrisering te maken met behulp van uw paneelzaag. Op aanvraag kunnen de tanden ook in onder een andere vorm/hoek of met andere diktes aangeslepen worden.
Groefzaagblad met widia zaagtanden om groeven te trekken in hardhout, zacht hout, gelamineerde panelen en andere producten op basis van hout. De zaagbladen hebben een asgat van 30mm en zijn ideaal voor gebruik op freesmachines of op zaagtafels.
The Air Flux 3500AS anti fire separator is the newest member in our product range of hoovers. The product is characterised by a compact and efficient design, supported by the 15 filters and the powerful motor unit. This unit was also equipped with a vibrating function to keep the filters clean. The filter cleaning can be operated via the integrated control box. There are no manual steps involved; everything can be set automatically.
This hoover belongs to the noise-absorbing fine dust extractors. In addition, it has been customised for your (compact) CNC milling machine, panel saw or sanding machine.
The closed housing is made of 1.2 mm thick sheet steel with an attractively applied powder coating. This closed housing provides optimum protection for the filters, polyester micron filter bags. The waste is collected in a detachable, mobile metal container. This makes maintenance considerably easier and your working environment more hygienic.
The waste container is equipped with an easy-to-unlock handle and a visual inspection window. The wide inlet (200 mm) makes the extractor very suitable for integration with a system with a high air flow rate. The rotor is dynamically balanced to minimise noise.
The extraction unit was equipped with an anti-fire separator. This unique system significantly reduces the risk of fire and forms a trap for larger pieces of wood waste (larger than 25 x 25). The anti-fire separator proves its worth; your environment becomes safer!
Finally, the aircraft was fitted with a wheel base to ensure easy movement.
Set profielmessen hoogte 50mm Nr. 2013 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Stofhoed in zwart PVC met diameter buis 100mm om te gebruiken in combinatie met de Air Flux stofafzuigingssystemen. De grootte van de opening bedraagt 340x180mm.
Saw blade with 20 teeth
Saw blade with flat, beveled (FZ/FA) teeth and anti-kickback design for cutting slab woods and boards, timber with parts of concrete and metal (nails, metal fittings), porous concrete blocks. For use on table saws.
Met deze V-groeffrezen kunt u diepe en ondiepe V-groeven maken, ideaal voor het maken van belettering, signage of voor decoratieve afwerking op panelen en meubels. Gebruik deze frees zonder risico op verbranding. De frees is verder uiterst geschikt voor het maken van afgeschuinde randen. Het is aangeraden meerdere malen te passeren bij het verwijderen van grote hoeveelheden materiaal.
A set of ten high quality spacers with a tolerance of 0.01. The thicknesses vary between 1mm and 10mm with scale of 1. These rings are available with bore 30mm (Ø45mm) or with bore 50mm (Ø70mm).
Wood lubricant for machine surfaces and machine tables. Significantly improves the sliding of wood over machines in steel, cast iron or aluminium. Ideal for planers, routers, saw tables, etc. Also a great efficiency for sliding wood on wood (wooden guides, extension tables, drawers, etc.). Silicone-free. Can be used on all types of wood without leaving marks!
Advantages: does not damage glued joints, increases safety while working, increases quality of finish, leaves no traces.
Can also be used to restore shine to plastic.
Coffret en cinq parties avec des mèches SP à façonner à queue cylindrique avec des différentes diamètres. Le set consiste de cinq mèches à façonner de diamètre 15 – 20 – 25 – 30 – 35mm, présenté dans un coffret en bois de haute qualité. Attention: tous les mèches jusqu'à et y compris diamètre 30mm ont un queue de 8x30mm, la mèche de diamètre 35mm a une queue de 10x30mm.
Mèches à façonner à queue cylindriques Sistemi Klein
Foret forstner avec queue cylindrique pour percer des charnières invisibles dans le plupart des bois ou panneaux. Cette mèche charnière de haute qualité avec pointe de centrage, deux faces de découpage en SP et deux guides en SP vous assure une finition parfait de tous vos trous. Rotation à droite uniquement.
Weight
0,2 kg
1,31 kg
1 kg
1 kg
300 kg
0,05 kg
0,5 kg
1 kg
0,05 kg
0,05 kg
1 kg
N/B
Dimensions
N/B
N/B
N/B
N/B
730 × 1730 × 2280 cm
0,5 cm
34 × 18 cm
N/B
N/B
N/B
N/B
N/B
Additional information
Gewicht
0,2 kg
Diameter
98-105mm, 100mm
Gewicht
1,31 kg
Lengte klembereik
500cm
Gewicht
1 kg
Diameter
139mm
As diameter
30mm, 50mm
Freeshoogte
18-50mm
Snijvlakken
2+2+2
Radius
R4
Hoek
45°
Toerental Min-Max
5500-9400
Gewicht
1 kg
Zaagblad diameter
150mm
As diameter
30mm
Tand dikte
6,0mm
Zaagblad dikte
4,0mm
Aantal tanden
18
Tand vorm
Aangeslepen V-tand
Gewicht
300 kg
Afmetingen
730 × 1730 × 2280 cm
Vermogen
4PK
aantal filters
15
Filter afmetingen
160 x 1030 mm
filtratie oppervlakte
7.75 m2
afvalopslag
metal container (60x60x72cm)
capaciteit
3500m3
Gewicht
0,05 kg
Afmetingen
0,5 cm
Gewicht
0,5 kg
Afmetingen
34 × 18 cm
Diameter
100mm
Gewicht
1 kg
Zaagblad diameter
315mm
As diameter
30mm
Tand dikte
3,2mm
Zaagblad dikte
2,2mm
Aantal tanden
20
Meeneemgaten
PH01
Gewicht
0,05 kg
Diameter
12,7mm
Snijlengte
16mm
Lengte
45mm
Hoek
60°
Snijvlakken
2
Schacht
8mm
Gewicht
0,05 kg
As diameter
30mm, 50mm
Diameter
45mm, 70mm
Gewicht
1 kg
Diameter
15mm, 20mm, 25mm, 30mm, 35mm
Lengte
90mm
Schacht
10x30mm, 8x30mm
Meld je aan voor onze nieuwsbrief
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Vergelijken
We gebruiken cookies om ervoor te zorgen dat onze website zo soepel mogelijk draait. Als je doorgaat met het gebruiken van de website, gaan we er vanuit dat je ermee instemt.OkPrivacy policy