Deze pneumatische vacuümtafel op kantelbare steun is ontworpen om gladde, niet poreuze werkstukken vast te klemmen. Het vacuüm tussen de basis van de tafel en het werkstuk zorgt voor een stevige klemming en laat na gebruik geen sporen na. De kop van de steun kan 90° kantelen zodat u het werkstuk in een ideale positie kan plaatsen. De steun moet vastgezet worden met klemmen (niet inbegrepen). Deze steun is specifiek ontworpen om aan te sluiten op het model SVN450 of SVN460. Geen rechtstreekse aansluiting op de compressor zoals model SVN450 of SVN460.
DEMO MODEL, ONE PIECE ONLYMODEL WITH PEB250
Portable edge bander PEB200+ or PEB250+ pre-mounted in an extendable table for stationary processing of larger pieces. This edge bander with glue pot, glues PVC, ABS, melamine or wood edges to straight, round or shaped panels without any problems. The machine is suitable for processing edgebanding with thicknesses between 0.4-3mm and 10-62mm height. Choice of table with model PEB200+ or PEB250+. Both are suitable for gluing the same types of panels with one important difference. The model PEB250+ has speed and temperature control. The table is equipped with a holder for rolls and a manual end cutter.
The edge bander PEB200TRC or PEB250TRC is, like all other Virutex models, fitted with a patented Teflon® coated adhesive container. This coating offers some very important advantages over other, similar machines. After use, it is very easy to clean the glue container again, which makes this edge bander much easier to maintain.
Werkt bij alle machines tot 7,5 KW. Sluit meerdere machines aan, zodat ze samen opgestart kunnen worden. Gebruik deze simultaanstarter bij het combineren van een houtbewerkingsmachine en stofafzuigingssysteem. De aanloopautomaat zorgt ervoor dat uw stofafzuiging automatisch opstart, vier seconden nadat u zelf uw houtbewerkingsmachine opstartte. Na het stopzetten van uw houtbewerkingsmachine wordt ook de afzuiging enkele seconden later stopgezet. Deze extra paar seconden afzuiging zorgen ervoor dat uw leidingen steeds proper zijn.
Paquet promotionnel de la scie à panneaux ITAMAC Maestro X9 CNC 3200mm comprenant l'unité d'extraction, le tuyau d'extraction, les bandes de serrage et le jeu de la lame de scie principale et inciseur pour la finition de panneaux. Scies à panneaux avec large table à rouleaux en aluminium anodisé sur double guide-barre résistant à l'usure avec rouleaux remplaçables. Équipé d'un système de démarrage / arrêt de module intégré qui garantit un confort d'utilisation optimal.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Foret forstner avec queue cylindrique pour percer des charnières invisibles dans le plupart des bois ou panneaux. Cette mèche charnière de haute qualité avec pointe de centrage, deux faces de découpage en widia et deux guides en widia vous assure une finition parfait de tous vos trous. Rotation à droite uniquement.
Cette mèche est disponible en deux longueurs
Set de couteaux profilés hauteur 40mm Nr. 0013 pour des porte-outils à profiler universels. Approprié pour le fraisage de profilés de chants en bois massif avec un faible coût d'outillage. Acier à outils allié avec 16% cobalt pour un qualité de coup très haut et un fraisage confortable.
Content
Deze pneumatische vacuümtafel op kantelbare steun is ontworpen om gladde, niet poreuze werkstukken vast te klemmen. Het vacuüm tussen de basis van de tafel en het werkstuk zorgt voor een stevige klemming en laat na gebruik geen sporen na. De kop van de steun kan 90° kantelen zodat u het werkstuk in een ideale positie kan plaatsen. De steun moet vastgezet worden met klemmen (niet inbegrepen). Deze steun is specifiek ontworpen om aan te sluiten op het model SVN450 of SVN460. Geen rechtstreekse aansluiting op de compressor zoals model SVN450 of SVN460.
Portable edge bander PEB200+ or PEB250+ pre-mounted in an extendable table for stationary processing of larger pieces. This edge bander with glue pot, glues PVC, ABS, melamine or wood edges to straight, round or shaped panels without any problems. The machine is suitable for processing edge bands with thicknesses between 0.4-3mm and 10-62mm height. The automatic rollers and feed with guide system ensure that the edgebanding always lands correctly on your panel. The height and thickness of the edge band is very easy to adjust using the millimetre control. Finally, the machine also has an adjustable glue dosage so that you always use the right quantity for your workpiece.
Choice of table with model PEB200+ or PEB250+. Both are suitable for gluing the same types of panels with one important difference. The model PEB250+ has speed and temperature control. This makes this model more suitable for use on round or moulded panels. The table is equipped with a holder for rolls and a manual end cutter. The edge bander can be easily removed from the table for mobile work. In that case you must use pre-cut edge bands.
Patented glue pot
The edge bander PEB200TRC or PEB250TRC is, like all other Virutex models, fitted with a patented Teflon® coated adhesive container. This coating offers some very important advantages over other, similar machines. After use, it is very easy to clean the glue container again, which makes this edge bander much easier to maintain. This also means that you can use other colored adhesives quickly and without any problems. No additional adjustments are required to change the glue between two projects, even if it's differently colored. The adhesive rollers have been polymerised to prevent damage to your edge bands.
Werkt bij alle machines tot 7,5 KW. Sluit meerdere machines aan, zodat ze samen opgestart kunnen worden. Gebruik deze simultaanstarter bij het combineren van een houtbewerkingsmachine en stofafzuigingssysteem. De aanloopautomaat zorgt ervoor dat uw stofafzuiging automatisch opstart, vier seconden nadat u zelf uw houtbewerkingsmachine opstartte. Na het stopzetten van uw houtbewerkingsmachine wordt ook de afzuiging enkele seconden later stopgezet. Deze extra paar seconden afzuiging zorgen ervoor dat uw leidingen steeds proper zijn.
ReadytoWORK package de la scie à panneaux ITAMAC Maestro X9 3200mm comprenant l'unité d'extraction, le tuyau d'extraction, les bandes de serrage, les colliers de fixation etc. et le jeu de la lame de scie principale et inciseur pour la finition de la panneaux. Scies à panneaux avec large table à rouleaux en aluminium anodisé sur double guide-barre résistant à l'usure avec rouleaux remplaçables. Équipé d'un système de démarrage / arrêt de module intégré qui garantit un confort d'utilisation optimal.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. The router bit is solid carbide, with special micrograin finishing for best performance. Thanks to these combined qualities the router bit delivers high quality results for all your projects and a long working life. This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Foret forstner avec queue cylindrique pour percer des charnières invisibles dans le plupart des bois ou panneaux. Cette mèche charnière de haute qualité avec pointe de centrage, deux faces de découpage en widia et deux guides en widia vous assure une finition parfait de tous vos trous. Rotation à droite uniquement.
Cette mèche est disponible en deux longueurs
Set de couteaux profilés hauteur 40mm Nr. 0013 pour des porte-outils à profiler universels. Approprié pour le fraisage de profilés de chants en bois massif avec un faible coût d'outillage. Acier à outils allié avec 16% cobalt pour un qualité de coup très haut et un fraisage confortable.
Weight
1 kg
30 kg
1 kg
900 kg
0,05 kg
0,05 kg
0,05 kg
Dimensions
N/B
N/B
N/B
N/B
N/B
N/B
0,4 cm
Additional information
Gewicht
1 kg
Afmetingen werkvlak
150x150mm
Vacuumkracht
800gr/cm² bij 6 bar
Werkdruk
5,5-7 bar
Luchtverbruik bij 5,5 bar
28l/min
Gewicht
30 kg
Met kantenlijmer
PEB200+, PEB250+
Vermogen
830W
Inhoud lijmbak
230cm³
Temperatuur (met PEB200+)
170°C
Werksnelheid (met PEB200+)
3.6m/min
Temperatuur (met PEB250+)
120 – 200°C
Werksnelheid (met PEB250+)
2-6m/min
Min-Max. hoogte band
10-62mm
Min-Max. dikte band
0.4-3mm
Gewicht
1 kg
Gewicht
900 kg
Gewicht
0,05 kg
Diameter
4mm
Snijlengte
11mm
Lengte
51mm
Snijvlakken
2+1
Gewicht
0,05 kg
Diameter
20mm
Lengte
90mm, 120mm
Schacht
10x100mm, 10x60mm
Gewicht
0,05 kg
Afmetingen
0,4 cm
Meld je aan voor onze nieuwsbrief
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Vergelijken
We gebruiken cookies om ervoor te zorgen dat onze website zo soepel mogelijk draait. Als je doorgaat met het gebruiken van de website, gaan we er vanuit dat je ermee instemt.OkPrivacy policy