Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Porte outils en métal léger avec lames réversibles en carbure de haute qualité (HW). Les couteaux sont à un angle exact de 45° pour une finition précise de vos chanfreins. La fraise est parfaitement adaptée au fraisage d'angles, par exemple pour produire des cadres. Grâce aux couteaux en carbure de tungstène, cette fraise à chanfreiner coupe sans effort dans les planches ou les bois massifs et produit toujours une surface lisse. Peut également être utilisé sur des matériaux collés.
Disponible avec un alésage de 30 mm ou 50 mm.
Saw blade with 32 teeth
Construction saw blade with 'flat angle' teeth and a wide back for improved support of the tooth. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for use on pallet wood or wood with remnants of nails,... Thanks to the wide back, the teeth are less likely to be damaged if you hit nails or other debris in the wood during sawing. Ideal for construction site saws or tilting log saws. Made in Germany, take advantage of the extremely solid German quality.
Deze tafelsteun voor de PRL95 klemmen zorgt ervoor dat de klem stabiel op een tafel kan gezet worden waardoor klemmen een stuk makkelijker wordt.
Cette fraise à rayon creux permet d'arrondir facilement et rapidement les coins pour obtenir une forme ronde. La fraise peut également être utilisée pour créer une rainure à fond plat entre deux formes rondes. En augmentant la profondeur de travail, vous obtenez le classique "quart de rond" qui est typique pour les bords des tables à manger, par exemple. Grâce à ses tranchants en carbure de haute qualité (widia), cette fraise peut être utilisée sur la plupart des types de bois.
De tanden van dit zaagblad werden in V-vorm (45°) aangeslepen om gemakkelijk en snel lambrisering te maken met behulp van uw paneelzaag. Op aanvraag kunnen de tanden ook in onder een andere vorm/hoek aangeslepen worden.
Groefzaagblad met widia zaagtanden om groeven te trekken in hardhout, zacht hout, gelamineerde panelen en andere producten op basis van hout. De zaagbladen hebben een asgat van 30mm en zijn ideaal voor gebruik op freesmachines of op zaagtafels.
Lengte van deze boor is 145mm
Langgatboren met spaanbrekers, zowel links- als rechtsdraaiend verkrijgbaar. Deze boren zijn uiterst geschikt voor het boren van diepe gaten of sleuven in de meeste houtsoorten. Voorzien van twee snijvlakken in 18% HSS hoogwaardig staal en spaanbrekers.
Set profielmessen hoogte 50mm Nr. 2059 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Longueur de mèche 57,5mm - Longueur de coupe 30mm
Mèches pour trous borgnes pour perceuses multibroches, disponible à coupe gauche ou droite. Ces mèches sont approprié pour utilisation sur le plupart de types de bois naturels et de bois pressé, aggloméré, plaqué et stratifié. Grâce à l'inciseur négatif vous obtenez toujours un excellent résultat de votre forage. Ces mèches sont fabriqués avec quatre hélices. Fourni de revêtement thermique P.T.F.E. sur le corps de l'outil pour améliorer la sortie des copeaux.
Universal saw blade with alternate top bevel teeth for cutting of different types of wood, laminated materials, double sided veneer panels or particle board in stack. For panel sizing machines and table saws. Available with different number of teeth.
Set de couteaux profilés hauteur 40mm Nr. 0082 pour des porte-outils à profiler universels. Approprié pour le fraisage de profilés de chants en bois massif avec un faible coût d'outillage. Acier à outils allié avec 16% cobalt pour un qualité de coup très haut et un fraisage confortable.
Length of this drill is 57,5mm – cutting length 30mm
Dowel drills for line boring machines, available with both left and right hand rotation. These drills are especially well suited for use on all natural woods, pressed wood and MDF, laminated, veneered or chipboard panels. Thanks to the spurs ground with negative cutting angle you are guaranteed a good finish of your project. These drills have four flutes with chip breakers. The drill is PTFE coated allowing for a much improved chip flow during drilling.
Content
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Porte outils en métal léger avec lames réversibles en carbure de haute qualité (HW). Les couteaux sont à un angle exact de 45° pour une finition précise de vos chanfreins. La fraise est parfaitement adaptée au fraisage d'angles, par exemple pour produire des cadres. Grâce aux couteaux en carbure de tungstène, cette fraise à chanfreiner coupe sans effort dans les planches ou les bois massifs et produit toujours une surface lisse. Peut également être utilisé sur des matériaux collés.
Disponible avec un alésage de 30 mm ou 50 mm.
Saw blade with 32 teeth
Construction saw blade with 'flat angle' teeth and a wide back for improved support of the tooth. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for use on pallet wood or wood with remnants of nails,... Thanks to the wide back, the teeth are less likely to be damaged if you hit nails or other debris in the wood during sawing. Ideal for construction site saws or tilting log saws. Made in Germany, take advantage of the extremely solid German quality.
Deze tafelsteun voor de PRL95 klemmen zorgt ervoor dat de klem stabiel op een tafel kan gezet worden waardoor klemmen een stuk makkelijker wordt.
Cette fraise à rayon creux permet d'arrondir facilement et rapidement les coins pour obtenir une forme ronde. La fraise peut également être utilisée pour créer une rainure à fond plat entre deux formes rondes. En augmentant la profondeur de travail, vous obtenez le classique "quart de rond" qui est typique pour les bords des tables à manger, par exemple. Grâce à ses tranchants en carbure de haute qualité (widia), cette fraise peut être utilisée sur la plupart des types de bois.
De tanden van dit zaagblad werden in V-vorm (45°) aangeslepen om gemakkelijk en snel lambrisering te maken met behulp van uw paneelzaag. Op aanvraag kunnen de tanden ook in onder een andere vorm/hoek of met andere diktes aangeslepen worden.
Groefzaagblad met widia zaagtanden om groeven te trekken in hardhout, zacht hout, gelamineerde panelen en andere producten op basis van hout. De zaagbladen hebben een asgat van 30mm en zijn ideaal voor gebruik op freesmachines of op zaagtafels.
Lengte van deze boor is 145mm
Langgatboren met spaanbrekers, zowel links- als rechtsdraaiend verkrijgbaar. Deze boren zijn uiterst geschikt voor het boren van diepe gaten of sleuven in de meeste houtsoorten. Voorzien van twee snijvlakken in 18% HSS hoogwaardig staal en spaanbrekers.
Set profielmessen hoogte 50mm Nr. 2059 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Longueur de mèche 57,5mm - Longueur de coupe 30mm
Mèches pour trous borgnes pour perceuses multibroches, disponible à coupe gauche ou droite. Ces mèches sont approprié pour utilisation sur le plupart de types de bois naturels et de bois pressé, aggloméré, plaqué et stratifié. Grâce à l'inciseur négatif vous obtenez toujours un excellent résultat de votre forage. Ces mèches sont fabriqués avec quatre hélices. Fourni de revêtement thermique P.T.F.E. sur le corps de l'outil pour améliorer la sortie des copeaux.
Universal saw blade with alternate top bevel teeth for cutting of different types of wood, laminated materials, MDF, double sided veneer panels or particle board in stack. For panel sizing machines and tabel saws. Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing. A high number of teeth calls for a lower operating speed but guarantees a clean cut. Available with different number of teeth.
Set de couteaux profilés hauteur 40mm Nr. 0082 pour des porte-outils à profiler universels. Approprié pour le fraisage de profilés de chants en bois massif avec un faible coût d'outillage. Acier à outils allié avec 16% cobalt pour un qualité de coup très haut et un fraisage confortable.
Length of this drill is 57,5mm – cutting length 30mm
Dowel drills for line boring machines, available with both left and right hand rotation. These drills are especially well suited for use on all natural woods, pressed wood and MDF, laminated, veneered or chipboard panels. Thanks to the spurs ground with negative cutting angle you are guaranteed a good finish of your project. These drills have four flutes with chip breakers. The drill is PTFE coated allowing for a much improved chip flow during drilling.
Weight
0,05 kg
1 kg
1 kg
0,02 kg
0,05 kg
1 kg
0,05 kg
0,05 kg
0,05 kg
1 kg
0,05 kg
0,05 kg
Dimensions
N/B
N/B
N/B
N/B
N/B
N/B
N/B
0,5 cm
N/B
N/B
0,4 cm
N/B
Additional information
Gewicht
0,05 kg
Diameter
50mm
Lengte
90mm
Schacht
10x60mm
Gewicht
1 kg
Diameter
150mm
As diameter
30mm, 50mm
Snijvlakken
2
Freeshoogte
36mm
Toerental Min-Max
5000-9500, 5100-8800
Gewicht
1 kg
Zaagblad diameter
450mm
As diameter
30mm
Tand dikte
4,0mm
Aantal tanden
32
Gewicht
0,02 kg
Gewicht
0,05 kg
Diameter
14mm
Snijlengte
13mm
Lengte
41mm
Radius
R4
Snijvlakken
2
Gewicht
1 kg
Zaagblad diameter
180mm
As diameter
30mm
Tand dikte
6,0mm
Zaagblad dikte
4,0mm
Aantal tanden
24
Tand vorm
Aangeslepen V-tand
Gewicht
0,05 kg
Diameter
14mm
Lengte
145mm
Schacht
16x50mm
Draairichting
Links, Rechts
Gewicht
0,05 kg
Afmetingen
0,5 cm
Gewicht
0,05 kg
Diameter
16mm
Snijlengte
30mm
Lengte
57,5mm
Schacht
10x20mm
Draairichting
Rechts, Links
Gewicht
1 kg
Zaagblad diameter
300mm
As diameter
30mm
Tand dikte
3,2mm
Zaagblad dikte
2,2mm
Aantal tanden
36, 48, 60, 72, 96
Meeneemgaten
PH02
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
0,05 kg
Diameter
6,4mm
Snijlengte
30mm
Lengte
57,5mm
Schacht
10x20mm
Draairichting
Links, Rechts
Meld je aan voor onze nieuwsbrief
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Vergelijken
We gebruiken cookies om ervoor te zorgen dat onze website zo soepel mogelijk draait. Als je doorgaat met het gebruiken van de website, gaan we er vanuit dat je ermee instemt.OkPrivacy policy