Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Deze boor is verkrijgbaar in twee verschillende lengtes
Set profielmessen hoogte 40mm Nr. 0068 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Support réglable en hauteur avec trois fonctions et une capacité de charge maximale de 85 kg. Le support est équipé d'un rouleau (largeur 290 mm), d'un plat et d'une série de huit roulements à billes. La hauteur minimale de travail du support est de 700 mm et la hauteur maximale est de 1100 mm. Ce support est parfaitement adapté à un large éventail d'applications.
Les mousses à ressort standard conviennent aux clips à ressort FeatherPRO et FeatherDUO. Ils ont des charnières plus épaisses que les peignes ultra-légers pour avoir plus de force à une pression plus élevée. Jeu de 2 pièces.
Robust, all-steel tilting log saw for quick, easy and safe cutting of firewood. This tilting log saw for firewood is fully compliant with the CEN safety standards for this type of machinery. The cover prevents you from getting near the saw blade while working, greatly reducing the risk of accidents. This tilting log saw is equipped with a saw blade in German chrome with diameter Ø600mm and an induction motor of 5.5 HP. Extremely suitable for cutting branches or tree trunks with a maximum thickness of 220mm. Ergonomic and easy to operate, with automatic return unit. Experience all the advantages of solid Austrian quality.
Fully assembled on delivery and ready to use.
Plaquette en carbure carrée pour gouge à dégrossir 11 mm
Le Belmash RS-02 est inestimable pour travailler avec des pièces de bois plus longues que ce que la table de travail peut supporter. Ce support à rouleaux offre un moyen sûr et facile de travailler avec ces pièces surdimensionnées. Facile et pratique à utiliser. Equipé de rouleaux en téflon pour éviter d'endommager votre pièce. Hauteur réglable entre 700mm et 1050mm.
UITVERKOOP
Economy -systeem REKORD : 14-delige set Kozijn-frezen
Uniek voor de productie van kozijnen, ramen en deuren volgens de Nederlandse standaard profielen.
Asgat 40 mm.
rekord raamfrees nr 128 1,00
rekord raamfrees nr 999 1,00
rekord raamfrees nr 918 1,00
rekord raamfrees nr 921 1,00
rekord raamfrees nr 922 1,00
rekord raamfrees nr 938 1,00
rekord raamfrees nr 916a 2,00
geslepen freesdoornring d40x21.5 1,00
geslepen freesdoornring d40x17.0 1,00
geslepen freesdoornring d40x14.0 1,00
geslepen freesdoornring d40x9.5 2,00
geslepen freesdoornring d40x9.0 1,00
Le Belmash RS-01 est inestimable pour travailler avec des pièces de bois plus longues que ce que la table de travail peut supporter. Ce support à rouleaux offre un moyen sûr et facile de travailler avec ces pièces surdimensionnées. Facile et pratique à utiliser. Equipé de rouleaux en téflon pour éviter d'endommager votre pièce. Les deux côtés du support peuvent s'incliner de 45°. Hauteur réglable entre 700mm et 1050mm.
Set profielmessen hoogte 40mm Nr. 0036 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Sortie optionelle 2x Ø125mm pour utilisation avec Air Flux Cyclone. Le grand diamètre est de 203mm, directement connectable aux groupes d'extraction du cyclone Air Flux, avec des branches 2x125mm.
Universal saw blade with alternate top bevel teeth for cutting of different types of wood, laminated materials, double sided veneer panels or particle board in stack. For panel sizing machines and table saws. Available with different number of teeth.
Groeffrees met omkeerbare messen en voorsnijders in hoogwaardig hardmetaal (HW) voor het maken van dunne precisiegroeven. Instelbaar in hoogte tussen 8mm en 15mm door middel van afstandsringen. Afstandsringen standaard inbegrepen. Dankzij de hardmetalen messen snijdt deze groeffrees moeiteloos door massieve platen, harde en zachte houtsoorten, MDF of gelamineerde platen.
Verkrijgbaar met asgat 30mm of 50mm.
This bit is made specifically for machining dovetail joints. Dovetail joints are classic, but extremely strong, mechanical connections to be used in general woodworking. Use these joints to construct cabinet drawers, coffins, cases, or other types of furniture. Thanks to the hard metal (carbide) cutting edges, a clean and accurate result of all your milling and woodworking projects is guaranteed.
To work even faster or more efficiently, it is possible to use a dovetail-mold.
Cutterset consisting of two elements in light alloy with reversible tungsten carbide knives (HW). Cutter set specifically designed to perform both high precision planing and chamfering. Suitable for machining wood with a height between 18mm and 50mm. The blades have a radius on the one hand and a chamfer of 45° on the other hand. The blades with radius R4 are mounted on the milling head as standard. Knives with radius R2, R3, R5 and R6 are available separately.
Because the knives are placed both above and below the cutterset, it is possible to round off/chamfer your workpiece in one passage. Thanks to the tungsten carbide blades, this profile cutter cuts effortlessly through solid boards or solid wood. Also suitable for use on sheet materials.
Set profielmessen hoogte 40mm Nr. 0055 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
De standaard veerschuimen zijn geschikt voor de FeatherPRO en FeatherDUO veerklemmen. Ze hebben dikkere scharnieren t.o.v. de ultralight kammen om meer kracht te hebben bij hogere druk. Set van 2 stuks.
Ce rabot ponceur de Virutex est facile à utiliser et donne des résultats rapides et efficaces sur de grandes surfaces. La machine donne d'excellents résultats sur toute surface recouverte de peinture, de résine, de vernis ou de panneaux stratifiés. Facile à utiliser sur différentes surfaces telles que le bois (également contre le grain) ou les panneaux sandwich. Un manchon ponceur avec un rouleau abrasif de grain 50 est monté en standard. Des manchon ponceur avec différentes grain sont disponibles sur demande. Aucun outil supplémentaire n'est nécessaire pour remplacer les manchon ponceur.
Standard livré dans un étui pratique en PVC.
Dubbele zuignap die flexibel met elkaar verbonden zijn. De zuignappen kunnen dus bewegen tegen over elkaar. Sterk plastic body uit ABS. Inclusief beschermende cover. Deze zuignap heeft een laadcapaciteit van 30 kg.
Cutter head in light alloy with blades in high quality tungsten carbide (HW) for machining of quarter rounds. The set comes deliverd in a plastic box. With standard delivery the knives of radius 5/10 are mounted on the body. The knives of radius R3/6 and R4/8 are supplied within the box. Thanks to the tungsten carbide blades, this grooving cutter cuts effortlessly through solid boards or solid woods. Also suitable for use with plywood or chipboard.
Available with bore 30mm or 50mm.
Content
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Deze boor is verkrijgbaar in twee verschillende lengtes
Set profielmessen hoogte 40mm Nr. 0068 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Support réglable en hauteur avec trois fonctions et une capacité de charge maximale de 85 kg. Le support est équipé d'un rouleau (largeur 290 mm), d'un plat et d'une série de huit roulements à billes. La hauteur minimale de travail du support est de 700 mm et la hauteur maximale est de 1100 mm. Ce support est parfaitement adapté à un large éventail d'applications.
Les mousses à ressort standard conviennent aux clips à ressort FeatherPRO et FeatherDUO. Ils ont des charnières plus épaisses que les peignes ultra-légers pour avoir plus de force à une pression plus élevée. Jeu de 2 pièces.
Robust, all-steel tilting log saw for quick, easy and safe cutting of firewood. This tilting log saw for firewood is fully compliant with the CEN safety standards for this type of machinery. Includes zero voltage protection on the switch for improved safety in the event of voltage loss. Brennholz has been synonymous with reliability and safety for years. Experience all the advantages of solid Austrian quality thanks to this firewood saw. The cover prevents you from getting near the saw blade while working, greatly reducing the risk of accidents. This tilting log saw is equipped with a saw blade in German chrome with diameter Ø600mm. The direct-drive induction motor provides a power output of 5.5 HP. Use at least power cable with thickness 2.5m² to avoid damaging the motor. Extremely suitable for cutting branches or tree trunks with a maximum thickness of 220mm.
The tilting saw is equipped with an automatic return unit using a spring. The saw blade is effortless to operate and cuts quickly through the wood. Saw large quantities of wood in one go without any problems and ergonomically. An extension support is available as an option for sawing larger pieces. With the help of the yardstick you can then cut to the same size again and again. Equipped with a sturdy base with two wheels and a pull rod which makes it easy to move the machine. Easy to move, both indoors and outdoors and on uneven surfaces. Fully assembled on delivery and ready to use.
Plaquette en carbure carrée pour gouge à dégrossir 11 mm
Le Belmash RS-02 est inestimable pour travailler avec des pièces de bois plus longues que ce que la table de travail peut supporter. Ce support à rouleaux offre un moyen sûr et facile de travailler avec ces pièces surdimensionnées. Facile et pratique à utiliser. Equipé de rouleaux en téflon pour éviter d'endommager votre pièce. Hauteur réglable entre 700mm et 1050mm.
Economy -systeem REKORD : 14-delige set Kozijn-frezen
Uniek voor de productie van kozijnen, ramen en deuren volgens de Nederlandse standaard profielen.
rekord raamfrees nr 128 1,00
rekord raamfrees nr 999 1,00
rekord raamfrees nr 918 1,00
rekord raamfrees nr 921 1,00
rekord raamfrees nr 922 1,00
rekord raamfrees nr 938 1,00
rekord raamfrees nr 916a 2,00
geslepen freesdoornring d40x21.5 1,00
geslepen freesdoornring d40x17.0 1,00
geslepen freesdoornring d40x14.0 1,00
geslepen freesdoornring d40x9.5 2,00
geslepen freesdoornring d40x9.0 1,00
Le Belmash RS-01 est inestimable pour travailler avec des pièces de bois plus longues que ce que la table de travail peut supporter. Ce support à rouleaux offre un moyen sûr et facile de travailler avec ces pièces surdimensionnées. Facile et pratique à utiliser. Equipé de rouleaux en téflon pour éviter d'endommager votre pièce. Les deux côtés du support peuvent s'incliner de 45°. Hauteur réglable entre 700mm et 1050mm.
Set profielmessen hoogte 40mm Nr. 0036 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Sortie optionelle 2x Ø125mm pour utilisation avec Air Flux Cyclone. Le grand diamètre est de 203mm, directement connectable aux groupes d'extraction du cyclone Air Flux, avec des branches 2x125mm.
Universal saw blade with alternate top bevel teeth for cutting of different types of wood, laminated materials, MDF, double sided veneer panels or particle board in stack. For panel sizing machines and tabel saws. Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing. A high number of teeth calls for a lower operating speed but guarantees a clean cut. Available with different number of teeth.
Groeffrees met omkeerbare messen en voorsnijders in hoogwaardig hardmetaal (HW) voor het maken van dunne precisiegroeven. Instelbaar in hoogte tussen 8mm en 15mm door middel van afstandsringen. Afstandsringen standaard inbegrepen. Dankzij de hardmetalen messen snijdt deze groeffrees moeiteloos door massieve platen, harde en zachte houtsoorten, MDF of gelamineerde platen.
Verkrijgbaar met asgat 30mm of 50mm.
This bit is made specifically for machining dovetail joints. Dovetail joints are classic, but extremely strong, mechanical connections to be used in general woodworking. Use these joints to construct cabinet drawers, coffins, cases, or other types of furniture. Thanks to the hard metal (carbide) cutting edges, a clean and accurate result of all your milling and woodworking projects is guaranteed.
To work even faster or more efficiently, it is possible to use a dovetail-mold.
Cutterset consisting of two elements in light alloy with reversible tungsten carbide knives (HW). Cutter set specifically designed to perform both high precision planing and chamfering. Suitable for machining wood with a height between 18mm and 50mm. The blades have a radius on the one hand and a chamfer of 45° on the other hand. The blades with radius R4 are mounted on the milling head as standard. Knives with radius R2, R3, R5 and R6 are available separately.
Because the knives are placed both above and below the cutterset, it is possible to round off/chamfer your workpiece in one passage. Thanks to the tungsten carbide blades, this profile cutter cuts effortlessly through solid boards or solid wood. Also suitable for use on sheet materials.
Available with bore 30mm or 50mm.
Set profielmessen hoogte 40mm Nr. 0055 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
De standaard veerschuimen zijn geschikt voor de FeatherPRO en FeatherDUO veerklemmen. Ze hebben dikkere scharnieren t.o.v. de ultralight kammen om meer kracht te hebben bij hogere druk. Set van 2 stuks.
Ce rabot ponceur de Virutex est facile à utiliser et donne des résultats rapides et efficaces sur de grandes surfaces. La machine donne d'excellents résultats sur toute surface recouverte de peinture, de résine, de vernis ou de panneaux stratifiés. Facile à utiliser sur différentes surfaces telles que le bois (également contre le grain) ou les panneaux sandwich. Un manchon ponceur avec un rouleau abrasif de grain 50 est monté en standard. Des manchon ponceur avec différentes grain sont disponibles sur demande. Aucun outil supplémentaire n'est nécessaire pour remplacer les manchon ponceur.
Standard livré dans un étui pratique en PVC.
Dubbele zuignap die flexibel met elkaar verbonden zijn. De zuignappen kunnen dus bewegen tegen over elkaar. Sterk plastic body uit ABS. Inclusief beschermende cover. Deze zuignap heeft een laadcapaciteit van 30 kg.
Cutter head in light alloy with blades in high quality tungsten carbide (HW) for machining of quarter rounds. The set comes deliverd in a plastic box. With standard delivery the knives of radius 5/10 are mounted on the body. The knives of radius R3/6 and R4/8 are supplied within the box. Thanks to the tungsten carbide blades, this grooving cutter cuts effortlessly through solid boards or solid woods. Also suitable for use with plywood or chipboard.
Available with bore 30mm or 50mm.
Weight
0,05 kg
0,05 kg
15 kg
0,5 kg
88 kg
N/B
5,2 kg
28 kg
6,3 kg
0,05 kg
2 kg
1 kg
1 kg
0,05 kg
1 kg
0,05 kg
0,5 kg
3,2 kg
0,6 kg
1 kg
Dimensions
N/B
0,4 cm
N/B
N/B
70 cm
N/B
N/B
N/B
N/B
0,4 cm
N/B
N/B
N/B
N/B
N/B
0,4 cm
N/B
N/B
N/B
N/B
Additional information
Gewicht
0,05 kg
Diameter
14mm
Lengte
90mm, 120mm
Schacht
10x100mm, 10x60mm
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
15 kg
Werkhoogte
700-1100mm
Lengte steunrol
290mm
Ø steunrol
57mm
Ø kogellager
16mm
Afmeting vlak
340x40mm
Gewicht
0,5 kg
Gewicht
88 kg
Afmetingen
70 cm
Voltage
3 x 400V
Motor
5.5 PK
Zaagblad diameter
600mm
Max. Snijdiameter
220mm
Gewicht
5,2 kg
Draagkracht
50kg
Hoogte
700-1050mm
Voet
475x490mm
Gewicht
28 kg
Gewicht
6,3 kg
Draagkracht
80kg
Hoogte
700-1050mm
Voet
570x650mm
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
2 kg
Gewicht
1 kg
Zaagblad diameter
400mm
As diameter
30mm
Tand dikte
4,0mm
Zaagblad dikte
2,8mm
Aantal tanden
120, 48, 60, 80, 96
Meeneemgaten
PH02
Gewicht
1 kg
Diameter
160mm
As diameter
30mm, 50mm
Snijvlakken
4
Aantal tanden
4
Snijlengte
30mm
Freeshoogte
8-15mm
Toerental Min-Max
4800-8200
Gewicht
0,05 kg
Diameter
12,7mm
Snijlengte
13mm
Lengte
49mm
Hoek
14°
Snijvlakken
2
Gewicht
1 kg
Diameter
139mm
As diameter
30mm, 50mm
Freeshoogte
18-50mm
Snijvlakken
2+2+2
Radius
R4
Hoek
45°
Toerental Min-Max
5500-9400
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
0,5 kg
Gewicht
3,2 kg
Vermogen
700W
Schuurdiepte
0-1mm
Lengte schuurrol
81mm
Nominale snelheid
16500rpm
Gewicht
0,6 kg
Laad capaciteit
30kg
Diameter
11,7cm
Gewicht
1 kg
Diameter
128mm
As diameter
30mm, 50mm
Snijvlakken
2
Freeshoogte
30mm
Radius
R3/6, R4/8, R5/10
Toerental Min-Max
5900-9700
Meld je aan voor onze nieuwsbrief
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Vergelijken
We gebruiken cookies om ervoor te zorgen dat onze website zo soepel mogelijk draait. Als je doorgaat met het gebruiken van de website, gaan we er vanuit dat je ermee instemt.OkPrivacy policy