Multifunctionele freeskop geschikt voor bijna elk profielmes dat vandaag op de markt is. De freeskop kan zowel de profielmessen van hoogte 40mm en 50mm als wegwerpmessen en omkeermessen tot 50mm dragen. Dankzij de voorsnijders boven en onderaan is uw freeswerk steeds zuiver afgewerkt. Ook geschikt voor rabat of sponning frezen.
This electric vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to the electric vacuum system SVE600 by Virutex (inlcuded). The head of the support can tilt 90° so that you can place the workpiece in an ideal position. The support must be secured with clamps (not included). This support is specifically designed to connect to the SVE660 or SVE670 model. No direct connection to the electric vacuum system SVE600 as model SVE660 or SVE670.
Cette fraise à rayon creux permet d'arrondir facilement et rapidement les coins pour obtenir une forme ronde. En augmentant la profondeur de travail, vous obtenez le classique "quart de rond" qui est typique pour les bords des tables à manger, par exemple. Finition parfait sur des différent types de bois grâce aux deux faces à couper en HW.
Equipé d'un roulement à billes pour faciliter le travail. Si vous utilisez une fraise à grand rayon, il est conseillé d'effectuer l'usinage en plusieurs étapes.
Zaagblad ‘Xtra Cut’ met FZ/TR ‘triple chip’ tanden (vlakdaktand) en een positieve tandhoek van 5°. Dit zaagblad is geschikt voor aluminium (hol), PVC en non-ferro metalen en kan gebruikt worden voor het verzagen van aluminium profielen en extrusies met een dikte tussen 2 en 5mm. Een speciale kunsthars in de gleuven zorgt voor meer stabiliteit en vermindert de trillingen van het zaagblad tijdens het werken. Geluidsarm.
Verkrijgbaar met verschillend aantal tanden.
Freesmal om te gebruiken op de Virutex FR129VB frees voor deurscharnieren om Argenta Invisible Neo M6 in te frezen. Deze mal is alleen geschikt voor het model Invisible Neo M6 van Argenta. Andere modellen verkrijgbaar. Scharnier niet inbegrepen.
Kreg zinc pocket-hole screws with square drive. The screw has a length of 51 mm (2") and a coarse thread, which makes it ideal for softwoods.
This drill is used to drill square holes and draw rectangular grooves in softwood and hardwood.
The ITAMAC ST1400 sliding table can be easily installed on most saw tables, spindle machines, etc. to greatly increase capacity. This nice addition to your saw table features a telescopic guide with an adjustable stop and an industrial sliding system with linear guide mechanism for extremely accurate results. By using the extension you can saw workpieces up to 1220mm. The easily positioned fence can also be angled at 45 ° using the built-in miter gauge.
This tenoning cart with tenoning hood is available as an option with the TT320N2CU and TT410N2CU combination machines.
The Harvey ST1400 sliding table can be easily installed on most saw tables, milling machines, etc. to increase capacity enormously. This nice addition to your saw table features a telescopic guide with an adjustable stop and an industrial sliding system with linear guide mechanism for extremely accurate results. By using the extension you can saw workpieces up to 1220mm. The easily positioned fence can also be angled at 45 ° using the built-in miter gauge.
Set profielmessen hoogte 40mm Nr. 0017 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
This pneumatic vacuum table is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to an external compressor (not included). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. Because you can place the table both vertically and horizontally, this module is ideal for a wide range of applications.
Using the rubber seals included as standard, you can easily divide the table into smaller sections. Standard delivery with one rubber seal already installed and a transparent tube for the air supply with 1/4" quick-release coupling.
Capot à poussière en PVC noir avec tube à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. La dimension de l'ouverture est 340x180mm.
Regelbare verzinker met twee widia snijoppervlakken om eenvoudig en in één beweging verzinkingen te boren. De boor maakt verzinkingen van 90° en is geschikt om te gebruiken op de meeste houtsoorten, houten plaatmaterialen, kunststoffen of composietmaterialen. Correcte inbussleutel inbegrepen.
Les presseurs Belmash offrent une sécurité accrue lorsque vous travaillez avec votre raboteuse. Planifiez en toute sécurité des poutres ou des planches sur n'importe quelle machine Belmash. La pince assure que la pièce est serrée sur la surface de travail. Cela facilite la circulation des matériaux, vous donnant une finition propre et précise. Ces dispositifs de serrage sont faciles à installer à l'aide des vis et des rondelles. L'ouverture peut être réglée à l'aide d'une poignée sur le dessus et d'une pince à ressort sur le côté. De cette manière, une bonne alimentation et une bonne force de pression sont toujours assurées.
Cette presseur peut être utilisé sur le Belmash SDMR2500.
Kit de roues à monter sur différentes machines de notre gamme Comfort Line. Utilisez ce kit de roues pour déplacer facilement votre scie à ruban, votre scie à panneaux, votre raboteuse ou votre toupie dans l'atelier. Avec levier détachable pour une manipulation aisée.
Tube translucide avec poignée et vane d'arrêt pour utilisation avec les aspirateurs de marque Air Flux. Utilisez le Clean-Up Kit pour nettoyer votre atelier et pour aspirer le poussière et coupeaux de bois restant.
DuroMess est une brosse en laiton robuste, adaptée au brossage intensif. Cette brosse est polyvalente et peut être utilisée pour texturer les bois durs et nettoyer les matériaux durs tels que le métal, l'acier inoxydable et la pierre, ainsi que pour enlever la saleté, la peinture, la rouille et bien plus encore.
Ces chevilles brevetées de 8 mm peuvent être utilisées dans toutes les applications où l'on utilise des chevilles en bois. Les chevilles assurent une connexion solide et permanente et sont appliquées sans colle ni outils, ce qui permet une grande facilité d'utilisation et un gain de temps.
Disponible en boîtes de 100, 200 ou 500.
DEMO MODEL
Manual edgebander for edgebanding pre-glued PVC, melamine or veneer to panels. The special design with adjustable clamps on both sides of the panel ensures high precision and great stability. The machine offers the possibility of surface gluing or with an excess on both sides. Setup time: less than a minute. This edgebander can be used on flat, concave or convex workpieces. With the help of a practical cutting system, it is easy to trim edges. Maximum thickness and width of the edge bands is 1x50mm.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Télécommande pour aspirateur Air Flux Cyclone - Air Flux 2000CKH en Air Flux 3000CKH.
Content
Multifunctionele freeskop geschikt voor bijna elk profielmes dat vandaag op de markt is. De freeskop kan zowel de profielmessen van hoogte 40mm en 50mm als vervangbare messen en omkeermessen tot 50mm dragen. Dankzij de voorsnijders boven en onderaan is uw freeswerk steeds zuiver afgewerkt. Ook geschikt voor rabat of sponning frezen.
This electric vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to the electric vacuum system SVE600 by Virutex (inlcuded). The head of the support can tilt 90° so that you can place the workpiece in an ideal position. The support must be secured with clamps (not included). This support is specifically designed to connect to the SVE660 or SVE670 model. No direct connection to the electric vacuum system SVE600 as model SVE660 or SVE670.
Cette fraise à rayon creux permet d'arrondir facilement et rapidement les coins pour obtenir une forme ronde. En augmentant la profondeur de travail, vous obtenez le classique "quart de rond" qui est typique pour les bords des tables à manger, par exemple. Finition parfait sur des différent types de bois grâce aux deux faces à couper en HW.
Equipé d'un roulement à billes pour faciliter le travail. Si vous utilisez une fraise à grand rayon, il est conseillé d'effectuer l'usinage en plusieurs étapes.
Zaagblad ‘Xtra Cut’ met FZ/TR ‘triple chip’ tanden (vlakdaktand) en een positieve tandhoek van 5°. Dit zaagblad is geschikt voor aluminium (hol), PVC en non-ferro metalen en kan gebruikt worden voor het verzagen van aluminium profielen en extrusies met een dikte tussen 2 en 5mm. Te gebruiken op zaagtafels. Dit zaagblad biedt een fijne snede en lange standtijd. Een speciale kunsthars in de gleuven zorgt voor meer stabiliteit en vermindert de trillingen van het zaagblad tijdens het werken. Geluidsarm.
Kies voor het juiste aantal tanden voor een optimaal resultaat van uw project. Een laag aantal tanden is geschikt voor snel en ruw zaagwerk. Een hoog aantal tanden behoeft een tragere zaagsnelheid maar zorgt voor een fijne en zuivere zaagsnede. Verkrijgbaar met verschillend aantal tanden.
Freesmal om te gebruiken op de Virutex FR129VB frees voor deurscharnieren om Argenta Invisible Neo M6 in te frezen. Deze mal is alleen geschikt voor het model Invisible Neo M6 van Argenta. Andere modellen verkrijgbaar. Scharnier niet inbegrepen.
Kreg pocket-hole screws with a square drive. The screw has a length of 51 mm (2") and a coarse thread, which makes it extremely suitable for softwood, and is made of zinc. Zinc provides adequate protection against rust and is an affordable alternative to the Blue-Kote and stainless steel varieties.
This screw is available in packs of 50 and 250 pieces.
To drill square holes and draw rectangular grooves in softwood and hardwood. Used on hollow chisel mortisers
The ITAMAC ST1400 sliding table can be easily installed on most saw tables, spindle machines, etc. to greatly increase capacity. This nice addition to your saw table features a telescopic guide with an adjustable stop and an industrial sliding system with linear guide mechanism for extremely accurate results. By using the extension you can saw workpieces up to 1220mm. The easily positioned fence can also be angled at 45 ° using the built-in miter gauge.
This tenoning cart with tenoning hood is available as an option with the TT320N2CU and TT410N2CU combination machines.
The Harvey ST1400 sliding table can be easily installed on most saw tables, milling machines, etc. to increase capacity enormously. This nice addition to your saw table features a telescopic guide with an adjustable stop and an industrial sliding system with linear guide mechanism for extremely accurate results. By using the extension you can saw workpieces up to 1220mm. The easily positioned fence can also be angled at 45 ° using the built-in miter gauge.
Set profielmessen hoogte 40mm Nr. 0017 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
This pneumatic vacuum table is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to an external compressor (not included). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. The table itself must be fixed with screws in the provided holes. Because you can place the table both vertically and horizontally, this module is ideal for a wide range of applications. Clamp workpieces for gluing, milling, trimming, etc...
Using the standard supplied rubber seals, you can easily divide the table into smaller sections. This is very useful for securing small pieces, for example. To secure larger workpieces, you can use multiple modules to prevent sagging. The optional distributor (ref. 5046350) allows you to connect up to five basic pneumatic modules at the same time. In this way you can operate them synchronously. Standard delivery with one rubber seal already installed and a transparent tube for the air supply with 1/4" quick-release coupling.
Capot à poussière en PVC noir avec tube à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. La dimension de l'ouverture est 340x180mm.
Regelbare verzinker met twee widia snijoppervlakken om eenvoudig en in één beweging verzinkingen te boren. De boor maakt verzinkingen van 90° en is geschikt om te gebruiken op de meeste houtsoorten, houten plaatmaterialen, kunststoffen of composietmaterialen. Correcte inbussleutel inbegrepen.
Plaats de verzinker op boren met minimumdiamater 6mm en maximum 10mm. Stel na het plaatsen van de boor de juiste snijhoogte in en zet de verzinker vast met behulp van de meegeleverde inbussleutel.
Les presseurs Belmash offrent une sécurité accrue lorsque vous travaillez avec votre raboteuse. Planifiez en toute sécurité des poutres ou des planches sur n'importe quelle machine Belmash. La pince assure que la pièce est serrée sur la surface de travail. Cela facilite la circulation des matériaux, vous donnant une finition propre et précise. Ces dispositifs de serrage sont faciles à installer à l'aide des vis et des rondelles. L'ouverture peut être réglée à l'aide d'une poignée sur le dessus et d'une pince à ressort sur le côté. De cette manière, une bonne alimentation et une bonne force de pression sont toujours assurées.
Cette presseur peut être utilisé sur le Belmash SDMR2500.
Kit de roues à monter sur différentes machines de notre gamme Comfort Line. Utilisez ce kit de roues pour déplacer facilement votre scie à ruban, votre scie à panneaux, votre raboteuse ou votre toupie dans l'atelier. Avec levier détachable pour une manipulation aisée.
Tube translucide avec poignée et vane d'arrêt pour utilisation avec les aspirateurs de marque Air Flux. Utilisez le Clean-Up Kit pour nettoyer votre atelier et pour aspirer le poussière et coupeaux de bois restant.
DuroMess est une brosse en laiton robuste, adaptée au brossage intensif. Cette brosse est polyvalente et peut être utilisée pour texturer les bois durs et nettoyer les matériaux durs tels que le métal, l'acier inoxydable et la pierre, ainsi que pour enlever la saleté, la peinture, la rouille et bien plus encore.
Manual edgebander for edgebanding pre-glued PVC, melamine or veneer to panels. The special design with adjustable clamps on both sides of the panel ensures high precision and great stability. The machine offers the possibility of surface gluing or with an excess on both sides. Setup time: less than a minute. This edgebander can be used on flat, concave or convex workpieces. With the help of a practical cutting system, it is easy to trim edges. Maximum thickness and width of the edge bands is 1x50mm.
Round-over router bit to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Télécommande pour aspirateur Air Flux Cyclone - Air Flux 2000CKH en Air Flux 3000CKH.
Weight
1 kg
1 kg
0,05 kg
1 kg
0,1 kg
0,25 kg
0,01 kg
42 kg
10 kg
30 kg
0,05 kg
0,325 kg
0,5 kg
0,05 kg
3,3 kg
2 kg
1 kg
0,3 kg
N/B
2,7 kg
0,05 kg
0,5 kg
Dimensions
N/B
N/B
N/B
N/B
N/B
N/B
N/B
130 × 45 × 40 cm
N/B
130 × 45 × 40 cm
0,4 cm
16 × 20 × 2,2 cm
34 × 18 cm
N/B
30 × 26 × 7 cm
N/B
N/B
10 × 12 cm
N/B
N/B
N/B
N/B
Additional information
Gewicht
1 kg
Diameter
120mm
As diameter
50mm
Freeshoogte
50mm
Gewicht
1 kg
Vermogen
95W
Afmetingen werkvlak
150x150mm
Vacuümdruk
750mbar
Gewicht
0,05 kg
Diameter
36,7mm
Snijlengte
20mm
Lengte
57mm
Radius
R12
Schacht
8mm
Snijvlakken
2
Gewicht
1 kg
Zaagblad diameter
300mm
As diameter
30mm
Tand dikte
3,4mm
Zaagblad dikte
2,6mm
Aantal tanden
72, 84, 96
Meeneemgaten
2/11/63
Gewicht
0,1 kg
Gewicht
0,25 kg
Stuks in verpakking
50, 250
Lengte
51mm
Materiaal
Zinc
Gewicht
0,01 kg
Diameter
6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm
Schacht
15,9 mm
Gewicht
42 kg
Afmetingen
130 × 45 × 40 cm
Gewicht
10 kg
Gewicht
30 kg
Afmetingen
130 × 45 × 40 cm
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
0,325 kg
Afmetingen
16 × 20 × 2,2 cm
Afmetingen werkvlak
150x150mm
Vacuumkracht
800gr/cm² bij 6 bar
Werkdruk
5,5-7 bar
Luchtverbruik bij 5,5 bar
28l/min
Gewicht
0,5 kg
Afmetingen
34 × 18 cm
Diameter
100mm
Gewicht
0,05 kg
Diameter
6-10mm
Diameter 2
15,5-19,5mm
Snijlengte
12mm
Lengte
34mm
Gewicht
3,3 kg
Afmetingen
30 × 26 × 7 cm
Max. hoogte werkstuk
63mm
Max. breedte werkstuk
270mm
Gewicht
2 kg
Gewicht
1 kg
Gewicht
0,3 kg
Afmetingen
10 × 12 cm
Gewicht
N/B
Aantal stuks
100 pièces, 200 pièces, 500 pièces
Gewicht
2,7 kg
Max. breedte kanten
50mm
Max. dikte kanten
1mm
Temperatuur
1: 300°C, 2: 525°C
Luchtstroom
400l/min
Gewicht
0,05 kg
Diameter
16mm
Snijlengte
8mm
Lengte
46mm
Radius
R1,6
Schacht
8mm
Snijvlakken
2
Gewicht
0,5 kg
Meld je aan voor onze nieuwsbrief
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Vergelijken
We gebruiken cookies om ervoor te zorgen dat onze website zo soepel mogelijk draait. Als je doorgaat met het gebruiken van de website, gaan we er vanuit dat je ermee instemt.OkPrivacy policy