| Description | De Deck Jig™ boor en schroefbit zijn gemaakt van gehard staal en hebben zeskantschachten die compatibel zijn met Quick-Change. Zowel de boor als de schroefbit zijn exclusief bedoeld voor de Kreg® Deck Jig™ en worden geleverd met een stopring en inbussleutel om de boor- en schroefdiepte beter te controleren. | Showroommodel
Only one piece available!
Portable edge bander PEB250+ mounted in an extendable table for stationary processing of larger pieces. This edge bander with glue pot, glues PVC, ABS, melamine or wood edges to straight, round or shaped panels without any problems. The machine is suitable for processing edge bands with thicknesses between 0.4-3mm and 10-62mm height. The model PEB250+ has speed and temperature control. Table equipped with holder for rolls and automatic end trimmer.
The edge bander PEB250TA, like all other Virutex models, is fitted with a patented Teflon® coated adhesive container. This coating offers some very important advantages over other, similar machines. After use, it is very easy to clean the glue container again, which makes this edge bander much easier to maintain.
| Porte outils universel avec possibilité de monter presque tous les couteaux disponible sur le marché maintenant. Le porte outils peut porter aussi bien des couteaux profilés de 40 mm et 50 mm de hauteur que des couteaux remplaçables et des couteaux réversibles jusqu'à 50 mm. Grâce aux araseurs en haut et en bas, votre travail de fraisage est toujours propre. Convient également pour les rabais. | With the Kreg KMA4700 stop ruler XL you can neatly and accurately saw large sheet material up to 2438 mm (96”). Whether you want to get started with your circular saw, jigsaw or edge trimmer, with the Kreg straight edge guide XL you can create a precise and accurate result.
The Kreg stop ruler XL consists of two parts of 711 mm (28") and two parts of 610 mm (24") that you connect to each other with the supplied connectors. On one side of the ruler, you can attach the handle. This handle allows you to easily pull the ruler backwards. You position the ruler, after which you can easily clamp it with the adjustable GripMaxx fixing clamp. This built-in clamping system ensures that the ruler is always firmly attached to your material, ensuring that you make straight cuts.
The four parts of the Kreg XL stop ruler can also be used separately. For example, you can also process smaller sheet material with the XL stop ruler. |
| Content | De Deck Jig™ boor en schroefbit zijn gemaakt van gehard staal en hebben zeskantschachten die compatibel zijn met Quick-Change. Zowel de boor als de schroefbit zijn exclusief bedoeld voor de Kreg® Deck Jig™ en worden geleverd met een stopring en inbussleutel om de boor- en schroefdiepte beter te controleren. |
Portable edge bander PEB250+ mounted in an extendable table for stationary processing of larger pieces. This edge bander with glue pot, glues PVC, ABS, melamine or wood edges to straight, round or shaped panels without any problems. The machine is suitable for processing edge bands with thicknesses between 0.4-3mm and 10-62mm height. The automatic rollers and feed with guide system ensure that the edgebanding always lands correctly on your panel. The height and thickness of the edge band is very easy to adjust using the millimetre control. Finally, the machine also has an adjustable glue dosage so that you always use the right quantity for your workpiece.
With the portable edge bander PEB250+ both the speed of the rollers and the temperature can be controlled. This makes the PEB250+ very suitable to work on moulded panels. The speed control allows you to always use the correct speed in function of the work. This ability offers greater working comfort on moulded panels. The table is equipped with a holder for rolls and an automatic end trimmer. The edge bander can be easily removed from the table for mobile work. In that case you must use pre-cut edge bands.
Patented glue pot
The edge bander PEB200TRC or PEB250TRC is, like all other Virutex models, fitted with a patented Teflon® coated adhesive container. This coating offers some very important advantages over other, similar machines. After use, it is very easy to clean the glue container again, which makes this edge bander much easier to maintain. This also means that you can use other colored adhesives quickly and without any problems. No additional adjustments are required to change the glue between two projects, even if it's differently colored. The adhesive rollers have been polymerised to prevent damage to your edge bands.
| Porte outils universel avec possibilité de monter presque tous les couteaux disponible sur le marché maintenant. Le porte outils peut porter aussi bien des couteaux profilés de 40 mm et 50 mm de hauteur que des couteaux remplaçables et des couteaux réversibles jusqu'à 50 mm. Grâce aux araseurs en haut et en bas, votre travail de fraisage est toujours propre. Convient également pour les rabais. | With the Kreg KMA4700 XL you can neatly and accurately saw large sheet material up to 2438 mm (96”). Whether you want to get started with your circular saw, jigsaw or edge mill, with the Kreg straight edge guide XL you can create a precise and accurate result.
The Kreg stop ruler XL consists of two parts of 711 mm (28") and two parts of 610 mm (24") that you connect to each other with the supplied connectors. On one side of the ruler, you can attach the handle. This handle allows you to easily pull the ruler backwards. You position the ruler, after which you can easily clamp it with the adjustable GripMaxx fixing clamp. This built-in clamping system ensures that the ruler is always firmly attached to your material, ensuring that you make straight cuts.
The four parts of the Kreg XL stop ruler can also be used separately. For example, you can also process smaller sheet material with the XL stop ruler.
With the Kreg guide ruler XL you no longer have to put in so much effort to keep your machine in a straight line. You simply move your machine along the guide. Your machine rests against the sturdy aluminum guide during the entire cut, giving you a precise result.
The Kreg guide comes with two guide arms, also known as cutline indicator arms. With these guide arms you can set exactly where the saw blade comes. This way your ruler is exactly set up on your machine. This ensures that you always cut exactly where you want to cut. The indicator arms are easy to slide out of the way after adjustment.
The Kreg KMA4700 is made of anodized aluminum and shock-resistant plastic. This makes this XL stop ruler lasts a long time, even with intensive use. |
