Verplaatst grote panelen op een ergonomische manier met de Kreg Platendrager. Klemmen, optillen en wegwezen! Het dragen van grote platen wordt makkelijker. U kan platen zelf verplaatsen zonder extra inspanning of risico op beschadiging van het materiaal. Schuif gewoon de grote pads over het paneel en til de hendel op om het vast te klemmen en automatisch aan te passen aan de materiaaldikte. De pads zijn bekleed met Kreg GripMaxx™ om een sterke, veilige grip te garanderen zonder beschadigingen, deuken of vlekken. Zélfs op kwetsbaar multiplex fineer.
De ergonomische handgreep heeft een dikke, duurzame vulling, dit maakt het dragen van de platen aangenaam. Bovendien, hoe meer u de handgreep optilt, hoe strakker de kussentjes knijpen om wegglijden te voorkomen. De paneeldrager is een geweldige aanvulling voor elke projectbouwer.
Bandsaw blade with length 3607mm for use on the TT500X band saw machine from Tendotools. This saw blade has 4 TPI (teeth per inch) and has a width of 13, 16 or 20mm. This bandsaw blade in tempered steel "Flexback" is very suitable for multipurpose sawing. Use this saw ribbon for both wood and plastics. The teeth of the saw blade were given an additional heat treatment for increased hardness. This keeps the band very supple and increases your cutting comfort thanks to the hardness of the teeth. Thickness of 0,80mm, the saw ribbon of 13mm has a thickness of 0,65mm.
Last pieces!
The Job-Saw TT255 is a powerful and compact machine for all carpentry work in the workshop or on the job site. The telescopic extension table goes up to a length of 1030 mm. Equipped with built-in hoover with a large collection bag. Cutting height of 82 mm at 90° and easily tiltable to 45°. Easy to move and with telescopic handle. Width guide with eccentric clamping.
SHOWROOM MODEL, old colours 2022
The Air Flux3500AS anti fire separator is the newest member in our product range of hoovers. The product is characterised by a compact and efficient design, supported by the 15 filters and the powerful motor unit. This unit was also equipped with a vibrating function to keep the filters clean. The filter cleaning can be operated via the integrated control box. There are no manual steps involved; everything can be set automatically.
This hoover belongs to the noise-absorbing fine dust extractors. In addition, it has been customised for your (compact) CNC milling machine, panel saw or sanding machine.
The closed housing is made of 1.2 mm thick sheet steel with an attractively applied powder coating. This closed housing provides optimum protection for the filters, polyester micron filter bags. The waste is collected in a detachable, mobile metal container. This makes maintenance considerably easier and your working environment more hygienic.
The waste container is equipped with an easy-to-unlock handle and a visual inspection window. The wide inlet (200 mm) makes the extractor very suitable for integration with a system with a high air flow rate. The rotor is dynamically balanced to minimise noise.
The extraction unit was equipped with an anti-fire separator. This unique system significantly reduces the risk of fire and forms a trap for larger pieces of wood waste (larger than 25 x 25). The anti-fire separator proves its worth; your environment becomes safer!
Finally, the aircraft was fitted with a wheel base to ensure easy movement.
Afsluitschuif met diameter 100mm om te gebruiken in combinatie met de Air Flux stofafzuigingssystemen. Voorzien aan een zijde van schroefdraad voor de flexibele afzuigslang en aan andere zijde van quick aansluiting die past op andere PVC accessoires van Ø 100 mm.
Double ventouse sur un corps fixe. Corps en alliage d'aluminium solide. Comprend une housse de protection. Utilisation à une main. Cette ventouse a une capacité de charge de 60 kg.
Blast gate diameter 100mm to be used with the Air Flux dust extractors. Threaded on one side for the flexible extraction hose and on the other side with a quick connection that fits other PVC accessories of Ø 100 mm.
Content
Verplaatst grote panelen op een ergonomische manier met de Kreg Platendrager. Klemmen, optillen en wegwezen! Het dragen van grote platen wordt makkelijker. U kan platen zelf verplaatsen zonder extra inspanning of risico op beschadiging van het materiaal. Schuif gewoon de grote pads over het paneel en til de hendel op om het vast te klemmen en automatisch aan te passen aan de materiaaldikte. De pads zijn bekleed met Kreg GripMaxx™ om een sterke, veilige grip te garanderen zonder beschadigingen, deuken of vlekken. Zélfs op kwetsbaar multiplex fineer.
De ergonomische handgreep heeft een dikke, duurzame vulling, dit maakt het dragen van de platen aangenaam. Bovendien, hoe meer u de handgreep optilt, hoe strakker de kussentjes knijpen om wegglijden te voorkomen. De paneeldrager is een geweldige aanvulling voor elke projectbouwer.
Bandsaw blade with length 3607mm for use on the TT500X band saw machine from Tendotools. This saw blade has 4 TPI (teeth per inch) and has a width of 13, 16 or 20mm. This bandsaw blade in tempered steel "Flexback" is very suitable for multipurpose sawing. Use this saw ribbon for both wood and plastics. The teeth of the saw blade were given an additional heat treatment for increased hardness. This keeps the band very supple and increases your cutting comfort thanks to the hardness of the teeth.
The Job-Saw TT255 is a powerful and compact machine for all carpentry work in the workshop or on the job site. The telescopic extension table goes up to a length of 1030 mm. Equipped with built-in extractor with a large collection bag. Cutting height of 82 mm at 90° and easily tiltable to 45°. Easy to move and with telescopic handle. Width guide with eccentric clamping.
The Air Flux 3500AS anti fire separator is the newest member in our product range of hoovers. The product is characterised by a compact and efficient design, supported by the 15 filters and the powerful motor unit. This unit was also equipped with a vibrating function to keep the filters clean. The filter cleaning can be operated via the integrated control box. There are no manual steps involved; everything can be set automatically.
This hoover belongs to the noise-absorbing fine dust extractors. In addition, it has been customised for your (compact) CNC milling machine, panel saw or sanding machine.
The closed housing is made of 1.2 mm thick sheet steel with an attractively applied powder coating. This closed housing provides optimum protection for the filters, polyester micron filter bags. The waste is collected in a detachable, mobile metal container. This makes maintenance considerably easier and your working environment more hygienic.
The waste container is equipped with an easy-to-unlock handle and a visual inspection window. The wide inlet (200 mm) makes the extractor very suitable for integration with a system with a high air flow rate. The rotor is dynamically balanced to minimise noise.
The extraction unit was equipped with an anti-fire separator. This unique system significantly reduces the risk of fire and forms a trap for larger pieces of wood waste (larger than 25 x 25). The anti-fire separator proves its worth; your environment becomes safer!
Finally, the aircraft was fitted with a wheel base to ensure easy movement.
Afsluitschuif met diameter 100mm om te gebruiken in combinatie met de Air Flux stofafzuigingssystemen. Voorzien aan een zijde van schroefdraad voor de flexibele afzuigslang en aan andere zijde van quick aansluiting die past op andere PVC accessoires van Ø 100 mm.
Double ventouse sur un corps fixe. Corps en alliage d'aluminium solide. Comprend une housse de protection. Utilisation à une main. Cette ventouse a une capacité de charge de 60 kg.
Blast gate diameter 100mm to be used with the Air Flux dust extractors. Threaded on one side for the flexible extraction hose and on the other side with a quick connection that fits other PVC accessories of Ø 100 mm.
Weight
N/B
0,5 kg
36 kg
300 kg
0,5 kg
0,94 kg
0,5 kg
Dimensions
N/B
N/B
N/B
730 × 1730 × 2280 cm
N/B
N/B
N/B
Additional information
Gewicht
0,5 kg
Lengte
3607mm
Breedte
13mm, 16mm, 20mm
Dikte
0,65mm, 0,80mm
Gewicht
36 kg
Gewicht
300 kg
Afmetingen
730 × 1730 × 2280 cm
Vermogen
4PK
aantal filters
15
Filter afmetingen
160 x 1030 mm
filtratie oppervlakte
7.75 m2
afvalopslag
metal container (60x60x72cm)
capaciteit
3500m3
Gewicht
0,5 kg
Diameter
100mm
Gewicht
0,94 kg
Laad capaciteit
60kg
Diameter
12,3cm
Gewicht
0,5 kg
Diameter
100mm
Meld je aan voor onze nieuwsbrief
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Vergelijken
We gebruiken cookies om ervoor te zorgen dat onze website zo soepel mogelijk draait. Als je doorgaat met het gebruiken van de website, gaan we er vanuit dat je ermee instemt.OkPrivacy policy
