EINDEREEKS
De Harvey Falcon series zijn hoogwaardige freesmachines, specifiek ontwikkeld voor industriële freestoepassingen. Ontworpen met het oog op zowel functionaliteit als comfort, beschikt deze machine over alle mogelijke functies voor een freesmachine uit deze klasse. Voorzien van een extra zwaar chassis, een massief aluminium beschermkap met veiligheidsgeleiders en fijnregeling. De krachtige 230V motor levert 3PK en zorgt ervoor dat deze tafel bijna elke freesopdracht aankan. De Harvey Falcon HW303 heeft een as van 30mm. Mits de optioneel verkrijgbare adaptor en spantangen kan de machine ook ingezet worden om te profileren met behulp van bovenfreesjes. De grote gietijzeren tafel garandeert de nodige stabiliteit tijdens het werken. Inzetbaar op vier snelheden, met gecentraliseerd controlepaneel boven de machine.
De HW303ES is voorzien van een slidingsysteem met tafel en verstekgeleider.
SHOWROOM MODEL - NIEUW
De timmermansschaafmachine CPL 270 is vervaardigd uit aluminium en staal, en heeft een volledig stalen schaafspindel met twee schaafmessen.
De krachtige motor, de scherpe voorkant en de uitlaat voor de schavelingen aan de voorkant zorgen ervoor dat de machine zowel met droog als met vochtig hout perfect bedienbaar blijft, zonder dat de sleuf dicht komt te zitten door de grote hoeveelheid schavelingen. Hierdoor kunt u ook lange balken in één beweging schaven.
De afname schaafmachine is eenvoudig in te stellen door een draaiknop van 0 tot 3mm, wat ervoor zorgt dat ze ook na langdurig gebruik soepel en nauwkeurig blijft werken.
De CPL 270 is de perfecte partner voor elke timmerman op een bouwplaats.
LAST MODEL!
This support with balls features 13 balls and measures 45 cm x 28 cm.
The height is adjustable from 64 cm to 108 cm.
Saw blade with 28 teeth
Construction saw blade with 'flat angle' teeth and a wide back for improved support of the tooth. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for use on pallet wood or wood with remnants of nails,... Thanks to the wide back, the teeth are less likely to be damaged if you hit nails or other debris in the wood during sawing. Ideal for construction site saws or tilting log saws. Made in Germany, take advantage of the extremely solid German quality.
Reserve pomp voor alle PIHER zuignappen die gebruik maken van een pomp.
Modèle de salle d'expo
Le dépoussiéreur Air Flux est conçu pour augmenter la capacité de presque tous les aspirateurs conventionnels et les transformer en un système de dépoussiérage efficace. Le conteneur métallique de 99 litres est doté d'une fenêtre de niveau, de charnières à dégagement rapide et de roulettes. Le séparateur capture la sciure, les copeaux de bois et autres débris avant qu'ils ne pénètrent dans l'aspirateur, évitant ainsi la perte de puissance d'aspiration due à un filtre bouché. La base équipée de cinq roulettes pivotantes lui confère une stabilité exceptionnelle et une grande facilité de manœuvre dans l'atelier. Le séparateur de flux d'air crée un flux d'air cyclonique qui sépare la plupart des particules de poussière de bois et autres matériaux plus lourds que l'air, les empêchant ainsi de pénétrer dans l'aspirateur.
Powerful rotary orbital sander for high quality sanding and polishing on both wood and metal. This machine combines a double movement, the sanding pad moves both orbital and rotary orbital. Thanks to the double movement during sanding, you always get a smooth surface without scratching your workpiece. Thanks to a 900W motor, this model is the most powerful sander if its type on the market. The handle at the front of the machine can be placed to the left or right of the machine. This allows both left and right-handers to work comfortably with this sander.
As standard, this sander is fitted with an integrated dust extractor and dust bag. Including soft PU sanding pad (Ø150mm) with velcro.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. The smaller bearing provides an upright standing side to the rounding. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Replacement waste bags PVC 120µm to be used with the Air Flux 3000CKH Cyclone. These bags are to be used underneath the filter.
Koppelstuk 45° met diameter 100mm om te gebruiken in combinatie met de Air Flux stofafzuigingssystemen.
Content
De Harvey Falcon series zijn hoogwaardige freesmachines, specifiek ontwikkeld voor industriële freestoepassingen. Ontworpen met het oog op zowel functionaliteit als comfort, beschikt deze machine over alle mogelijke functies voor een freesmachine uit deze klasse. Voorzien van een extra zwaar chassis, een massief aluminium beschermkap met veiligheidsgeleiders en fijnregeling. De krachtige 230V motor levert 3PK en zorgt ervoor dat deze tafel bijna elke freesopdracht aankan. De Harvey Falcon HW303 heeft een as van 30mm. Mits de optioneel verkrijgbare adaptor en spantangen kan de machine ook ingezet worden om te profileren met behulp van bovenfreesjes. De grote gietijzeren tafel garandeert de nodige stabiliteit tijdens het werken. Inzetbaar op vier snelheden, met gecentraliseerd controlepaneel boven de machine.
De HW303ES is voorzien van een slidingsysteem met tafel en verstekgeleider.
De timmermansschaafmachine CPL 270 is vervaardigd uit aluminium en staal, en heeft een volledig stalen schaafspindel met twee schaafmessen.
De krachtige motor, de scherpe voorkant en de uitlaat voor de schavelingen aan de voorkant zorgen ervoor dat de machine zowel met droog als met vochtig hout perfect bedienbaar blijft, zonder dat de sleuf dicht komt te zitten door de grote hoeveelheid schavelingen. Hierdoor kunt u ook lange balken in één beweging schaven.
De afname schaafmachine is eenvoudig in te stellen door een draaiknop van 0 tot 3mm, wat ervoor zorgt dat ze ook na langdurig gebruik soepel en nauwkeurig blijft werken.
De CPL 270 is de perfecte partner voor elke timmerman op een bouwplaats.
LAST MODEL!
This support with balls features 13 balls and measures 45 cm x 28 cm.
The height is adjustable from 64 cm to 108 cm.
Saw blade with 28 teeth
Construction saw blade with 'flat angle' teeth and a wide back for improved support of the tooth. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for use on pallet wood or wood with remnants of nails,... Thanks to the wide back, the teeth are less likely to be damaged if you hit nails or other debris in the wood during sawing. Ideal for construction site saws or tilting log saws. Made in Germany, take advantage of the extremely solid German quality.
Reserve pomp voor alle PIHER zuignappen die gebruik maken van een pomp.
Le dépoussiéreur Air Flux est conçu pour augmenter la capacité de presque tous les aspirateurs conventionnels et les transformer en un système de dépoussiérage efficace. Le conteneur métallique de 99 litres est doté d'une fenêtre de niveau, de charnières à dégagement rapide et de roulettes. Le séparateur capture la sciure, les copeaux de bois et autres débris avant qu'ils ne pénètrent dans l'aspirateur, évitant ainsi la perte de puissance d'aspiration due à un filtre bouché. La base équipée de cinq roulettes pivotantes lui confère une stabilité exceptionnelle et une grande facilité de manœuvre dans l'atelier. Le séparateur de flux d'air crée un flux d'air cyclonique qui sépare la plupart des particules de poussière de bois et autres matériaux plus lourds que l'air, les empêchant ainsi de pénétrer dans l'aspirateur.
Powerful rotary orbital sander for high quality sanding and polishing on both wood and metal. This machine combines a double movement, the sanding pad moves both orbital and rotary orbital. Thanks to the double movement during sanding, you always get a smooth surface without scratching your workpiece. The RT188N sander is perfect for sanding or polishing both wooden and metal surfaces. Thanks to a 900W motor, this model is the most powerful sander if its type on the market. The ergonomic design ensures a perfect grip and comfortable working. The handle at the front of the machine can be placed to the left or right of the machine. This allows both left and right-handers to work comfortably with this sander. All these qualities make the RT188N an indispensable tool for every professional.
As standard, this sander is fitted with an integrated dust extractor and dust bag. Including soft PU sanding pad (Ø150mm) with velcro.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. The smaller bearing provides an upright standing side to the rounding. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Replacement waste bags PVC 120µm to be used with the Air Flux 3000CKH Cyclone. These bags are to be used underneath the filter.
Koppelstuk 45° met diameter 100mm om te gebruiken in combinatie met de Air Flux stofafzuigingssystemen.
Weight
260 kg
17 kg
10 kg
1 kg
0,02 kg
5 kg
2,6 kg
0,05 kg
0,5 kg
0,5 kg
Dimensions
N/B
N/B
N/B
N/B
N/B
N/B
N/B
N/B
N/B
N/B
Additional information
Gewicht
260 kg
Motor
3 PK
Voltage
230 V
As diameter
30mm
Nominale snelheid
1400rpm, 3000rpm, 7000rpm, 9000rpm
Freesopening
38mm, 70mm, 100mm, 140mm
Freeshoogte
100mm
Werktafel
558x725mm
Geleider
423x127mm
Aansluiting afzuiging
100 mm
Werkhoogte
860mm
Chassis
590x530mm
Slidingsysteem
1220x230mm
Verstekgeleider
-50° – +50°
Gewicht
17 kg
Vermogen
1500W
Voltage
230 V
Schaafbreedte
270 mm
Schaafdiepte
0-3 mm
Toerental schaafas
12.400
Lengte
490mm
Gewicht
10 kg
Diameter kogels
25 mm
Aantal kogels
63 (9 x 7)
Max. draagkracht
200 kg
Hoogte
650-1100 mm
Gewicht
1 kg
Zaagblad diameter
400mm
As diameter
30mm
Tand dikte
3,8mm
Aantal tanden
28
Gewicht
0,02 kg
Voor de artikels
30100, 30110, 30131, 30132
Gewicht
5 kg
Aansluiting afzuiging
63 mm
Afvalton
99L
Gewicht
2,6 kg
Vermogen
900W
Schuurdiameter
150mm
Ø Rotatie
7mm
Nominale snelheid
3500-7500rpm
Gewicht
0,05 kg
Diameter
38mm
Snijlengte
19mm
Lengte
57mm
Radius
R12,7
Schacht
8mm
Snijvlakken
2
Gewicht
0,5 kg
Gewicht
0,5 kg
Diameter
100mm
Meld je aan voor onze nieuwsbrief
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Vergelijken
We gebruiken cookies om ervoor te zorgen dat onze website zo soepel mogelijk draait. Als je doorgaat met het gebruiken van de website, gaan we er vanuit dat je ermee instemt.OkPrivacy policy