Showroommodel
De houtversnipperaar van BrennHolz wordt aangedreven door een krachtige Honda-motor van 6,5pk. Dit maakt de hakselaar uitermate geschikt voor het grove werk. De sterke motor is geschikt voor gebruik in de bouw, ontbossing en agricultuur. Het werd uitgerust met twee grote messen en acht zogenoemde hamertjes (tien messen in totaal). De grote messen versnijden uw afval in kleine deeltjes, de hamertjes zorgen er op hun beurt voor dat dit afval verder verwerkt wordt tot compost. Na deze bewerking is uw afval uitermate geschikt als meststof voor allerlei toepassingen. De aandrijving wordt gereguleerd door een aandrijfriem, waardoor plotse schokken perfect opgevangen kunnen worden. Bovendien worden er twee verwisselbare bladeren meegeleverd. Al deze eigenschappen bij elkaar, maken dit unieke product een te duchten concurrent voor hakselaars uit een hogere prijsklasse.
Promotional package of panel saw Sliding TT1250X including dust collector, extraction hose, clamping bands and set of three saw blades. This compact panel saw from the Hobby+ series with 230V induction motor (2HP) is a very popular machine and the ideal entry-level model. This model of panel saw has a heavy-duty cast iron worktable that provides very good flatness. The high-quality prismatic sliding system has a total cutting length of 1250 mm.
Replacement filter bags for covering the filter of the Air Flux Dusty AF-1100/45 Dust Extractor. Easy to replace.
Set profielmessen hoogte 50mm Nr. 2010 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Lame de scie avec 28 dents
Lame de scie à dents plates, brise-copeaux et conception anti-kickback. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour la coupe de bois dur et tendre. Made in Germany, profitez de la solide qualité allemande.
This pneumatic vacuum table is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to an external compressor (not included). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. Because you can place the table both vertically and horizontally, this module is ideal for a wide range of applications.
Using the rubber seals included as standard, you can easily divide the table into smaller sections. Standard delivery with one rubber seal already installed and a transparent tube for the air supply with 1/4" quick-release coupling.
A nailing and stapling machine that can be adjusted by means of electronic control. Thanks to the ergonomic, well-balanced housing, this powerful tool is a handy helper during your jobs. Both staples (6 -14mm) and nails (max 16cm) can be placed with this device. There is a double safety switch on the device. The charger has a capacity of 83.
Caoutchouc de rechange pour pompe à ventouse. Convient à la pompe de toutes les ventouses PIHER.
This easy-to-handle chisel is used to reduce the rough workpiece.
This transport handle is standard equipped with a clamp which makes this handle suitable for multiple functions. Can be used as an edge press, corner press or transport handle. Thanks to its aluminium design, this handle is very strong and robust. The maximum load is 70kg. As an edge press you can use the PC81U on straight panels as well as concave or convex panels. As a corner press, this handle becomes the ideal tool for making frames, for example. The clamp is detachable and by changing the position of the handle, the PC81U can easily be converted into a transport handle. Suitable for panels between 0mm and 46mm thick.
Content
De houtversnipperaar van BrennHolz wordt aangedreven door een krachtige Honda-motor van 6,5pk. Dit maakt de hakselaar uitermate geschikt voor het grove werk. De sterke motor is geschikt voor gebruik in de bouw, ontbossing en agricultuur. Het werd uitgerust met twee grote messen en acht zogenoemde hamertjes (tien messen in totaal). De grote messen versnijden uw afval in kleine deeltjes, de hamertjes zorgen er op hun beurt voor dat dit afval verder verwerkt wordt tot compost. Na deze bewerking is uw afval uitermate geschikt als meststof voor allerlei toepassingen. De aandrijving wordt gereguleerd door een aandrijfriem, waardoor plotse schokken perfect opgevangen kunnen worden. Bovendien worden er twee verwisselbare bladeren meegeleverd. Al deze eigenschappen bij elkaar, maken dit unieke product een te duchten concurrent voor hakselaars uit een hogere prijsklasse.
Promotional package of panel saw Sliding TT1250X including dust collector, extraction hose, clamping bands and set of three saw blades. This compact panel saw from the Hobby+ series with 230V induction motor (2HP) is a very popular machine and the ideal entry-level model. This model of panel saw has a heavy-duty cast iron worktable that provides very good flatness. The high-quality prismatic sliding system has a total cutting length of 1250 mm.
Replacement filter bags for covering the filter of the Air Flux Dusty AF-1100/45 Dust Extractor. Easy to replace.
Set profielmessen hoogte 50mm Nr. 2010 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Lame de scie avec 28 dents
Lame de scie à dents plates, brise-copeaux et conception anti-kickback. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour la coupe de bois dur et tendre. Made in Germany, profitez de la solide qualité allemande.
This pneumatic vacuum table is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to an external compressor (not included). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. The table itself must be fixed with screws in the provided holes. Because you can place the table both vertically and horizontally, this module is ideal for a wide range of applications. Clamp workpieces for gluing, milling, trimming, etc...
Using the standard supplied rubber seals, you can easily divide the table into smaller sections. This is very useful for securing small pieces, for example. To secure larger workpieces, you can use multiple modules to prevent sagging. The optional distributor (ref. 5046350) allows you to connect up to five basic pneumatic modules at the same time. In this way you can operate them synchronously. Standard delivery with one rubber seal already installed and a transparent tube for the air supply with 1/4" quick-release coupling.
A nailing and stapling machine that can be adjusted by means of electronic control. Thanks to the ergonomic, well-balanced housing, this powerful tool is a handy helper during your jobs. Both staples (6 -14mm) and nails (max 16cm) can be placed with this device. There is a double safety switch on the device. The charger has a capacity of 83.
Caoutchouc de rechange pour pompe à ventouse. Convient à la pompe de toutes les ventouses PIHER.
This easy-to-handle chisel is used to reduce the rough workpiece. This is the first tool you use to obtain a round shape.
This transport handle is standard equipped with a clamp which makes this handle suitable for multiple functions. Can be used as an edge press, corner press or transport handle. Thanks to its aluminium design, this handle is very strong and robust. The maximum load is 70kg. As an edge press you can use the PC81U on straight panels as well as concave or convex panels. As a corner press, this handle becomes the ideal tool for making frames, for example. The clamp is detachable and by changing the position of the handle, the PC81U can easily be converted into a transport handle. Suitable for panels between 0mm and 46mm thick.
Weight
86 kg
350 kg
1 kg
0,05 kg
1 kg
0,325 kg
1,1 kg
0,01 kg
N/B
0,65 kg
Dimensions
N/B
N/B
N/B
0,5 cm
N/B
16 × 20 × 2,2 cm
N/B
N/B
N/B
N/B
Additional information
Gewicht
86 kg
Aandrijving
benzine – Honda motor
Vermogen
6.5 PK
aantal messen
10
max invoer
6 cm
Gewicht
350 kg
Gewicht
1 kg
Gewicht
0,05 kg
Afmetingen
0,5 cm
Gewicht
1 kg
Zaagblad diameter
400mm
As diameter
30mm
Tand dikte
3,5mm
Aantal tanden
28
Gewicht
0,325 kg
Afmetingen
16 × 20 × 2,2 cm
Afmetingen werkvlak
150x150mm
Vacuumkracht
800gr/cm² bij 6 bar
Werkdruk
5,5-7 bar
Luchtverbruik bij 5,5 bar
28l/min
Gewicht
1,1 kg
Gewicht
0,01 kg
Voor de artikels
30100, 30110, 30131, 30132
Breedte lemmet
19 mm
Diepte lemmet
10 mm
Nuttige lengte lemmet
160 mm
Gewicht
0,65 kg
Max. Draagkracht
70kg
Paneeldikte
0-46mm
Meld je aan voor onze nieuwsbrief
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Vergelijken
We gebruiken cookies om ervoor te zorgen dat onze website zo soepel mogelijk draait. Als je doorgaat met het gebruiken van de website, gaan we er vanuit dat je ermee instemt.OkPrivacy policy