| Description | Set profielmessen hoogte 40mm Nr. 0070 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | Grooving saw blade with flat (FZ) tungsten teeth to be used for cutting grooves in hardwood, softwood, timber wood, and plastic coated panel. The sawing blades have a bore of 30mm and are ideally suited for use on all spindle moulding machines or sawing tables.
Saw blade available in different diameters | Pressure plate with nut and spindle for Mod. 80 | The Kreg Pocket-Hole Jig 720 is a professional, fast and efficient jointing system. This system allows you to create very solid pocket holes in materials with a minimum thickness of 13 mm and a maximum thickness of 38 mm.
Setting up the Kreg Jig 720 is quick and easy. You simply put your material in the jig and push the handle down. The system then does all the work for you and adjusts to the correct thickness. The handle also gives you full control over the clamping force! In addition, the system is equipped with non-slip material. This keeps the system and your workpiece securely in place without marking your wood.
You can measure the thickness of the material with the supplied material thickness gauge. At the bottom of the Kreg 720 is a built-in storage system for the drill, driver bits and material thickness gauge. |
| Content | Set profielmessen hoogte 40mm Nr. 0070 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | Grooving saw blade with flat (FZ) tungsten teeth to be used for cutting grooves in hardwood, softwood, timber wood, and plastic coated panel. The sawing blades have a bore of 30mm and are ideally suited for use on all spindle moulding machines or sawing tables.
Saw blade available in different diameters | Pressure plate with nut and spindle for Mod. 80 | The Kreg Pocket-Hole Jig 720 is a professional, fast and efficient jointing system. This system allows you to create very solid pocket holes in materials with a minimum thickness of 13 mm and a maximum thickness of 38 mm.
Setting up the Kreg Jig 720 is quick and easy. You simply put your material in the jig and push the handle down. The system then does all the work for you and adjusts to the correct thickness. The handle also gives you full control over the clamping force! In addition, the system is equipped with non-slip material. This keeps the system and your workpiece securely in place without marking your wood.
You can measure the thickness of the material with the supplied material thickness gauge. The measurements on the gauge match those on the step drill. Tighten the stop collar at the correct size with the material thickness gauge, which is also a hex wrench.
At the bottom of the Kreg 720 is a built-in storage system for the drill, driver bits and material thickness gauge. Next to the storage space, the dimensions are shown, with several intermediate steps. This allows you to set the stop collar even more precisely on the drill bit. The Kreg 720 jointing system comes with an dust collection attachment that can be attached to the left and right of the drilling jig. You can slide the adapter and then an exhaust hose onto this, which extracts dust and wood chips, allowing you to keep a good view of your work surface. The Kreg jointing system can be used both horizontally and vertically.
Thanks to the shock-resistant and durable plastic construction with a hardened steel core, you can rest assured that the system will last a long time.
The Pocket-Hole Jig 720 comes with 60 pocket-hole screws in the two most popular sizes. |
| Additional information |
| Gewicht |
0,05 kg |
| Afmetingen |
0,4 cm |
|
| Gewicht |
1 kg |
| Zaagblad diameter |
125mm, 150mm, 180mm
|
| As diameter |
30mm
|
| Tand dikte |
4,0mm
|
| Zaagblad dikte |
2,8mm
|
| Aantal tanden |
12, 18, 24
|
|
|
| Gewicht |
3 kg |
| Schacht boor |
6.35 mm
|
| Boordiameter |
9.5 mm
|
| Min. materiaaldikte |
13 mm
|
| Max. materiaaldikte |
38 mm
|
|
