Description | Set profielmessen hoogte 40mm Nr. 0092 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | Helical planing and routing cutterhead with reversible knives in high quality carbide (HW). This cutter head is developped for finishing, planing or calibrating on moulding machines. Optionally you can use a mold and run-up ring to make curved workpieces. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards.
Available with bore 30mm or 50mm. The heads can be fitted with spurs on one or both sides on demand.
| Le TT60/9 est un lit à rouleaux avec 9 rouleaux sur roulements à billes. | Les presseurs Belmash offrent une sécurité accrue lorsque vous travaillez avec votre raboteuse. Planifiez en toute sécurité des poutres ou des planches sur n'importe quelle machine Belmash. La pince assure que la pièce est serrée sur la surface de travail. Cela facilite la circulation des matériaux, vous donnant une finition propre et précise. Ces dispositifs de serrage sont faciles à installer à l'aide des vis et des rondelles. L'ouverture peut être réglée à l'aide d'une poignée sur le dessus et d'une pince à ressort sur le côté. De cette manière, une bonne alimentation et une bonne force de pression sont toujours assurées.
Cette presseur peut être utilisé sur le Belmash SDR2200. | Adapter ring to reduce the bore of your saw blade to comply with your machine. Make sure every saw blade is compatible with your own machine thanks to these convenient reduction rings.
Reduction from bore 40mm to 32mm. | The length of this bit is 115mm
Slot mortising bits with chipbreaker, available with left or right hand rotation. These bits are well suited for drilling holes or grooves in most wood types. The bits have two cutting edges in 18% HSS steel and chip breakers. | SHOWROOM MODEL - NEW
The CPL 200 carpenter's planer is made of aluminium and steel, and has an all-steel planing spindle with two knives.
The powerful motor, the sharp front edge and the front shavings exhaust make the machine perfectly operable while working with both dry and humid wood without clamming the slot due to the large amount of shavings. This allows for the planing of long beams in one go.
The planer's depth of cut is easily adjusted by a rotary knob from 0 to 3mm, which ensures that it continues to work smoothly and accurately even after long periods of use.
The CPL 200 is the perfect partner for every carpenter on a construction site. | Flat feet for use on the PIHER clamps Mod. POT.
Made from steel |
Content | Set profielmessen hoogte 40mm Nr. 0092 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | Helical planing and routing cutterhead with reversible knives in high quality carbide (HW). This cutter head is developped for finishing, planing or calibrating on moulding machines. Optionally you can use a mold and run-up ring to make curved workpieces. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards.
Available with bore 30mm or 50mm. The heads can be fitted with spurs on one or both sides on demand.
| Le TT60/9 est un lit à rouleaux avec 9 rouleaux sur roulements à billes.
Le support est équipé d’une base robuste et de 9 rouleaux (largeur 360 mm) dans un lit à rouleaux (1950 x 450 x 95 mm) et a une capacité de charge de 500 kg. La hauteur de travail minimale est de 660 mm, la hauteur de travail maximale est de 1005 mm. | Les presseurs Belmash offrent une sécurité accrue lorsque vous travaillez avec votre raboteuse. Planifiez en toute sécurité des poutres ou des planches sur n'importe quelle machine Belmash. La pince assure que la pièce est serrée sur la surface de travail. Cela facilite la circulation des matériaux, vous donnant une finition propre et précise. Ces dispositifs de serrage sont faciles à installer à l'aide des vis et des rondelles. L'ouverture peut être réglée à l'aide d'une poignée sur le dessus et d'une pince à ressort sur le côté. De cette manière, une bonne alimentation et une bonne force de pression sont toujours assurées.
Cette presseur peut être utilisé sur le Belmash SDR2200. | Adapter ring to reduce the bore of your saw blade to comply with your machine. Make sure every saw blade is compatible with your own machine thanks to these convenient reduction rings.
Reduction from bore 40mm to 32mm. | The length of this bit is 115mm
Slot mortising bits with chipbreaker, available with left or right hand rotation. These bits are well suited for drilling holes or grooves in most wood types. The bits have two cutting edges in 18% HSS steel and chip breakers. | The CPL 200 carpenter's planer is made of aluminium and steel, and has an all-steel planing spindle with two knives.
The powerful motor, the sharp front edge and the front shavings exhaust make the machine perfectly operable while working with both dry and humid wood without clamming the slot due to the large amount of shavings. This allows for the planing of long beams in one go.
The planer's depth of cut is easily adjusted by a rotary knob from 0 to 3mm, which ensures that it continues to work smoothly and accurately even after long periods of use.
The CPL 200 is the perfect partner for every carpenter on a construction site. | Flat feet for use on the PIHER clamps Mod. POT.
Made from steel |
Additional information |
Gewicht |
0,05 kg |
Afmetingen |
0,4 cm |
|
Gewicht |
1 kg |
Diameter |
|
As diameter |
30mm, 50mm
|
Snijvlakken |
12
|
Freeshoogte |
76,5mm
|
Toerental Min-Max |
6000-17600
|
|
Gewicht |
45 kg |
Lengte steun |
360 mm
|
Diameter rol |
60 mm
|
Max. draagkracht |
500 kg
|
Hoogte |
660-1005 mm
|
Aantal rollen |
9
|
|
Gewicht |
3,3 kg |
Afmetingen |
30 × 26 × 7 cm |
Max. hoogte werkstuk |
63mm
|
Max. breedte werkstuk |
270mm
|
|
Gewicht |
0,05 kg |
Diameter |
40mm
|
As diameter |
32mm
|
|
Gewicht |
0,05 kg |
Diameter |
8mm
|
Lengte |
115mm
|
Schacht |
13x50mm
|
Draairichting |
Links, Rechts
|
|
Gewicht |
14 kg |
Vermogen |
1500W
|
Voltage |
230 V
|
Schaafbreedte |
200 mm
|
Schaafdiepte |
0-3 mm
|
Toerental schaafas |
12.400
|
Lengte |
490mm
|
|
|