| Description | Set profielmessen hoogte 40mm Nr. 0028 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | Sanding sleeves for mounting on the Durotec expansion roll Duro-Master. Ideal for sanding all types of metal.
Available in different grit sizes, delivered per 5 pieces. | Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps. |
| Content | Set profielmessen hoogte 40mm Nr. 0028 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | This abrasive sleeve is a versatile choice suitable for all metals as well as stainless steels. It is ideal for removing scratches and sanding weld seams. To use the sanding sleeves on the Durotec brush machine, the sanding sleeves should be used in combination with the DUROMASTER expansion roller.
With a maximum working speed of 30 m/s and a recommended speed of 20 m/s, you can work efficiently without compromising on quality. Moreover, the sanding belt is available in different grit sizes, so you can choose the one that best suits your specific sanding needs. This versatile sanding belt allows you to achieve professional results on a variety of materials and applications. | Round-over router bit to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps. |
| Additional information |
| Gewicht |
0,05 kg |
| Afmetingen |
0,4 cm |
|
| Gewicht |
0,300 kg |
| Afmetingen |
10 × 11 cm |
| Korrel |
K60, K80, K180
|
|
| Gewicht |
0,05 kg |
| Diameter |
48,7mm
|
| Snijlengte |
26mm
|
| Lengte |
72mm
|
| Radius |
R18
|
| Schacht |
12mm
|
| Snijvlakken |
2
|
|
