Set profielmessen hoogte 40mm Nr. 0072 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Les mousses à ressort Ultralight conviennent aux clips à ressort FeatherPRO et FeatherDUO. Les ressorts ultralégers sont moins rigides que les ressorts standard. Ceci est réalisé par un col plus fin sur la charnière à ressort. Jeu de 2 pièces.
This guide rail made of anodised aluminium is equipped with a T-shaped adjustment system that keeps the rail always parallel to the mitre gauge groove. The guide rail is easy to adjust and is held firmly in place with a double locking mechanism, namely a lever on the input side and a quarter-turn knob on the output side, so that the rail does not bend.
Met behulp van zijn ergonomische vorm helpt deze hendel u om eenvoudig panelen in verschillende materialen te transporteren. De hendel heeft drie basisfuncties: trekken, dragen of opheffen. Dankzij het ontwerp in aluminium is deze hendel erg sterk en robuust. De maximale last bedraagt 70kg. Geschikt voor panelen van dikte tussen 0mm en 46mm.
Optioneel zijn twee klemmen beschikbaar om op de hendel te plaatsen.
Rubber connector piece with clamps diameter 100mm to be used with the Air Flux dust extractors.
Adaptateur 1209
With the Precision Stock Guides, you don't have to struggle to hold plates or beams while pushing through on the saw - and router table. The rollers pull your workpiece tightly into place against the guide and your work table. You will cut more safely, easily and precisely while keeping your workpiece in place at all times.
The EB58K table is mobile, height-adjustable (with four fixed positions) and foldable for easy storage. The table provides a stable and solid base for attaching and transporting machines. The table can be moved or adjusted in height while the machine is attached. As a result, you do not have to constantly assemble or disassemble the machine. Adjusting the height is easy. Operate with your foot at the bottom of the height adjustment, then use the lever to secure it in the correct position. The maximum load-bearing capacity of the table is 100kg. Thanks to its small size, this table is ideal for use on location. To be used with PEB200TRC/PEB250TRC, PEB250TA and PEB250TRM.
Porte outils en métal léger avec des lames en carbure de tungstène (HW) de haute qualité pour l'arrondissage universel. L'ensemble est livré dans un coffret en plastique robuste. Les lames de rayon 5/10 sont installées en standard sur le porte outils. Les lames de rayon R3/6 et R4/8 sont incluses dans l'étui. Grâce aux lames en carbure de tungstène, cette porte outils pour bouvetage coupe sans effort dans les planches ou les bois massifs. Convient également pour une utilisation avec du contreplaqué ou des panneaux de particules.
Disponible avec un alésage de 30 mm ou 50 mm.
Mini-ponceuse vibrante légère et puissante pour le polissage et la finition de vos pièces. La conception ergonomique assure une prise en main parfaite et un travail confortable. Toutes les commandes sont facilement accessibles pendant le travail. Livraison standard avec fixation Delta pour le ponçage des endroits difficiles d'accès tels que les coins ou les stores. La pièce Delta est munie de velcro en haut et en bas pour fixer le papier de verre. En option, une plaque de ponçage ronde est également disponible pour cette machine. Equipé d'un extracteur de poussière intégré et d'un sac à poussière.
Egalement disponible avec un contrôle électronique de la vitesse comme le modèle LRE84H.
Vane d'arrêt à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. Fileté d'un côté pour le flexible d'extraction et de l'autre avec un raccord quick qui s'adapte à d'autres accessoires PVC de Ø 100 mm.
Cutter head in light alloy with blades in high quality tungsten carbide (HW) for machining of quarter rounds. The set comes deliverd in a plastic box. With standard delivery the knives of radius 5/10 are mounted on the body. The knives of radius R3/6 and R4/8 are supplied within the box. Thanks to the tungsten carbide blades, this grooving cutter cuts effortlessly through solid boards or solid woods. Also suitable for use with plywood or chipboard.
Available with bore 30mm or 50mm.
Cette fraise à rayon creux permet d'arrondir facilement et rapidement les coins pour obtenir une forme ronde. En augmentant la profondeur de travail, vous obtenez le classique "quart de rond" qui est typique pour les bords des tables à manger, par exemple. Finition parfait sur des différent types de bois grâce aux deux faces à couper en HW.
Equipé d'un roulement à billes pour faciliter le travail. Le plus petit roulement vous donne un rebord. Si vous utilisez une fraise à grand rayon, il est conseillé d'effectuer l'usinage en plusieurs étapes.
DuroMess is a robust brass brush suitable for heavy brushing. This brush is versatile and can be used for both texturing hard woods and cleaning hard materials such as metal, stainless steel and stone, as well as removing dirt, paint, rust removal and more.
Een set van tien stelringen van hoogwaardige kwaliteit met een tolerantie van 0,01. De diktes variëren tussen 1mm en 10mm met stappen van 1. Deze ringen zijn zowel beschikbaar met asgat 30mm (Ø45mm) of met asgat 50mm (Ø70mm).
Levage facile et sûr des panneaux de porte, meubles, ... Cet ascenseur de porte a une capacité de charge allant jusqu'à 200 kg. Équipé d'une base pivotante et d'une surface antidérapante. Fabriqué en aluminium. Hauteur maximale de levage 75cm.
Sac à poussière supplémentair pour l'aspirateur Air Flux Dusty AF950 stofafzuiging, en cotton.
Cette fraise à rayon creux permet d'arrondir facilement et rapidement les coins pour obtenir une forme ronde. La fraise peut également être utilisée pour créer une rainure à fond plat entre deux formes rondes. En augmentant la profondeur de travail, vous obtenez le classique "quart de rond" qui est typique pour les bords des tables à manger, par exemple. Grâce à ses tranchants en carbure de haute qualité (widia), cette fraise peut être utilisée sur la plupart des types de bois.
Cette table à vide électrique sur pied basculant est conçue pour serrer des pièces lisses et non poreuses. Le vide entre la base de la table et la pièce à usiner assure un serrage ferme et ne laisse aucune trace après utilisation. Pour que la table soit à vide, elle doit être connectée au système de fixation électrique à vide SVE600 de Virutex (inclus en standard). La tête du support peut s'incliner de 90° afin que vous puissiez placer la pièce dans une position idéale. Le support doit être fixé à l'aide de pinces (non comprises). Ce support est spécialement conçu pour se connecter au modèle SVE660 ou SVE670. Pas de connexion directe au système de fixation électrique de vide SVE600 comme le modèle SVE660 ou SVE670.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Lame de scie avec 24 dents
Lame de scie avec denture plate et biseautée (FZ/FA) et limiteur de coupeau pour la coupe des planches avec résidus de ciment ou éléments métalliques (clous, agrafes,...) ou de beton cellulaire. A utiliser sur les scies à table.
Whether you are starting from scratch, renovating or repairing, the drawer front assembly tool is the simple and effective way to assemble and align drawer fronts. It removes the need to use one hand to hold pieces in place while you work. The thick steel design features large clamp pads, a GripMaxx non-slip surface and ribbed corners to minimize flexibility and maintain project stability.
The Drawer Front Mounting Tool reduces the clumsy hassle and repositioning required and simplifies the process to three simple steps: clamp, align, attach.
Includes left and right Carrier front mounting tools.
Combine it with the Setup and Spacer Shims (sold separately) for accurate and consistent openings and sight lines.
Saw blade with 56 teeth
Wolf tooth saw blade for classic machines, suitable for fast cutting of different types of wood, wet wood or brush wood. To be used on yard or construction machinery but mainly suitable for firewood saws. The entire saw blade is finished in high quality Chrome-vanadium steel. Made in Germany, take advantage of the extremely solid German quality. Easy to sharpen yourself.
Vane d'arrêt à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux.
Double outlet Ø125mm to be used with Air Flux Cyclone Dust Extractors. The large diameter measures 203mm, which can be mounted on the cyclone dust extractors, with branching to 2x125mm.
Content
Set profielmessen hoogte 40mm Nr. 0072 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Les mousses à ressort Ultralight conviennent aux clips à ressort FeatherPRO et FeatherDUO. Les ressorts ultralégers sont moins rigides que les ressorts standard. Ceci est réalisé par un col plus fin sur la charnière à ressort. Jeu de 2 pièces.
This guide rail made of anodised aluminium is equipped with a T-shaped adjustment system that keeps the rail always parallel to the mitre gauge groove. The guide rail is easy to adjust and is held firmly in place with a double locking mechanism, namely a lever on the input side and a quarter-turn knob on the output side, so that the rail does not bend.
Met behulp van zijn ergonomische vorm helpt deze hendel u om eenvoudig panelen in verschillende materialen te transporteren. De hendel heeft drie basisfuncties: trekken, dragen of opheffen. Dankzij het ontwerp in aluminium is deze hendel erg sterk en robuust. De maximale last bedraagt 70kg. Geschikt voor panelen van dikte tussen 0mm en 46mm.
Optioneel zijn twee klemmen beschikbaar om op de hendel te plaatsen.
Rubber connector piece with clamps diameter 100mm to be used with the Air Flux dust extractors.
Adaptateur 1209
With the Precision Stock Guides, you don't have to struggle to hold plates or beams while pushing through on the saw - and router table. The rollers pull your workpiece tightly into place against the guide and your work table. You will cut more safely, easily and precisely while keeping your workpiece in place at all times.
Nothing can give you more safety and precision while holding your workpiece. You prevent kickback with this. And this without limitations!
The unique guide rollers on the Stock Guide are angled at 5 degrees, effectively and consistently pressing your workpiece against the guide. To prevent kickback, each roller is fitted with a ball bearing that can only rotate 1 way.
Your workpiece is pushed tightly against the guide and work table, and the grip of the polyurethane rollers keeps it safely in position.
The Precision Stock Guide can be attached to a standard T-Track used for most commercial routing tables. They also work just as well on a workbench or drill table with a 1/4" T-Track on the guide.
The Precision Stock Guides are CNC milled from sturdy aluminium and anodised for appearance and durability. The axles of the wheels are made of cold-rolled steel and hardened for durability. The adjustment knobs are made of stainless steel to last. The wheels are again made of wear-resistant acetol plastic, so it also has low friction resistance. The non-slip tyres are moulded from polyurethane for long life and superior grip on your workpiece.
The ITAMAC Precision Stock Guides can be installed easily and quickly. Along the profile, you can attach them in any position with a twist of the two knobs. You can set the height using the clamp button. When not in use, simply turn them aside.
The EB58K table is mobile, height-adjustable (with four fixed positions) and foldable for easy storage. The table provides a stable and solid base for attaching and transporting machines. The table can be moved or adjusted in height while the machine is attached. As a result, you do not have to constantly assemble or disassemble the machine. Adjusting the height is easy. Operate with your foot at the bottom of the height adjustment, then use the lever to secure it in the correct position. The maximum load-bearing capacity of the table is 100kg. Thanks to its small size, this table is ideal for use on location. To be used with PEB200TRC/PEB250TRC, PEB250TA and PEB250TRM.
Porte outils en métal léger avec des lames en carbure de tungstène (HW) de haute qualité pour l'arrondissage universel. L'ensemble est livré dans un coffret en plastique robuste. Les lames de rayon 5/10 sont installées en standard sur le porte outils. Les lames de rayon R3/6 et R4/8 sont incluses dans l'étui. Grâce aux lames en carbure de tungstène, cette porte outils pour bouvetage coupe sans effort dans les planches ou les bois massifs. Convient également pour une utilisation avec du contreplaqué ou des panneaux de particules.
Disponible avec un alésage de 30 mm ou 50 mm.
Mini-ponceuse vibrante légère et puissante pour le polissage et la finition de vos pièces. La conception ergonomique assure une prise en main parfaite et un travail confortable. Toutes les commandes sont facilement accessibles pendant le travail. Livraison standard avec fixation Delta pour le ponçage des endroits difficiles d'accès tels que les coins ou les stores. La pièce Delta est munie de velcro en haut et en bas pour fixer le papier de verre. En option, une plaque de ponçage ronde est également disponible pour cette machine. Equipé d'un extracteur de poussière intégré et d'un sac à poussière.
Egalement disponible avec un contrôle électronique de la vitesse comme le modèle LRE84H.
Vane d'arrêt à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. Fileté d'un côté pour le flexible d'extraction et de l'autre avec un raccord quick qui s'adapte à d'autres accessoires PVC de Ø 100 mm.
Cutter head in light alloy with blades in high quality tungsten carbide (HW) for machining of quarter rounds. The set comes deliverd in a plastic box. With standard delivery the knives of radius 5/10 are mounted on the body. The knives of radius R3/6 and R4/8 are supplied within the box. Thanks to the tungsten carbide blades, this grooving cutter cuts effortlessly through solid boards or solid woods. Also suitable for use with plywood or chipboard.
Available with bore 30mm or 50mm.
Cette fraise à rayon creux permet d'arrondir facilement et rapidement les coins pour obtenir une forme ronde. En augmentant la profondeur de travail, vous obtenez le classique "quart de rond" qui est typique pour les bords des tables à manger, par exemple. Finition parfait sur des différent types de bois grâce aux deux faces à couper en HW.
Equipé d'un roulement à billes pour faciliter le travail. Le plus petit roulement vous donne un rebord. Si vous utilisez une fraise à grand rayon, il est conseillé d'effectuer l'usinage en plusieurs étapes.
DuroMess is a robust brass brush suitable for heavy brushing. This brush is versatile and can be used for both texturing hard woods and cleaning hard materials such as metal, stainless steel and stone, as well as removing dirt, paint, rust removal and more.
Een set van tien stelringen van hoogwaardige kwaliteit met een tolerantie van 0,01. De diktes variëren tussen 1mm en 10mm met stappen van 1. Deze ringen zijn zowel beschikbaar met asgat 30mm (Ø45mm) of met asgat 50mm (Ø70mm).
Levage facile et sûr des panneaux de porte, meubles, ... Cet ascenseur de porte a une capacité de charge allant jusqu'à 200 kg. Équipé d'une base pivotante et d'une surface antidérapante. Fabriqué en aluminium. Hauteur maximale de levage 75cm.
Sac à poussière supplémentair pour l'aspirateur Air Flux Dusty AF950 stofafzuiging, en cotton.
Cette fraise à rayon creux permet d'arrondir facilement et rapidement les coins pour obtenir une forme ronde. La fraise peut également être utilisée pour créer une rainure à fond plat entre deux formes rondes. En augmentant la profondeur de travail, vous obtenez le classique "quart de rond" qui est typique pour les bords des tables à manger, par exemple. Grâce à ses tranchants en carbure de haute qualité (widia), cette fraise peut être utilisée sur la plupart des types de bois.
Cette table à vide électrique sur pied basculant est conçue pour serrer des pièces lisses et non poreuses. Le vide entre la base de la table et la pièce à usiner assure un serrage ferme et ne laisse aucune trace après utilisation. Pour que la table soit à vide, elle doit être connectée au système de fixation électrique à vide SVE600 de Virutex (inclus en standard). La tête du support peut s'incliner de 90° afin que vous puissiez placer la pièce dans une position idéale. Le support doit être fixé à l'aide de pinces (non comprises). Ce support est spécialement conçu pour se connecter au modèle SVE660 ou SVE670. Pas de connexion directe au système de fixation électrique de vide SVE600 comme le modèle SVE660 ou SVE670.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Lame de scie avec 24 dents
Lame de scie avec denture plate et biseautée (FZ/FA) et limiteur de coupeau pour la coupe des planches avec résidus de ciment ou éléments métalliques (clous, agrafes,...) ou de beton cellulaire. A utiliser sur les scies à table.
Whether you are starting from scratch, renovating or repairing, the Drawer Front Mounting Tool is the simple and effective way to assemble and align drawer fronts. It removes the need to use one hand to hold pieces in place while you work. The thick steel design features large clamp pads, a GripMaxx non-slip surface and ribbed corners to minimize flexibility and maintain project stability.
The Drawer Front Mounting Tool reduces the clumsy hassle and repositioning required and simplifies the process to three simple steps: clamp, align, attach.
Includes left and right Carrier front mounting tools.
Combine it with the Setup and Spacer Shims (sold separately) for accurate and consistent openings and sight lines.
Saw blade with 56 teeth
Wolf tooth saw blade for classic machines, suitable for fast cutting of different types of wood, wet wood or brush wood. To be used on yard or construction machinery but mainly suitable for firewood saws. The entire saw blade is finished in high quality Chrome-vanadium steel. Made in Germany, take advantage of the extremely solid German quality. Easy to sharpen yourself.
Vane d'arrêt à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux.
Double outlet Ø125mm to be used with Air Flux Cyclone Dust Extractors. The large diameter measures 203mm, which can be mounted on the cyclone dust extractors, with branching to 2x125mm.
Weight
0,05 kg
0,5 kg
2 kg
1 kg
0,5 kg
0,05 kg
5 kg
5 kg
1 kg
1,5 kg
0,5 kg
1 kg
0,05 kg
0,3 kg
0,05 kg
1,1 kg
0,5 kg
0,05 kg
1 kg
0,05 kg
1 kg
1 kg
1 kg
0,5 kg
2 kg
Dimensions
0,4 cm
N/B
N/B
N/B
N/B
N/B
N/B
N/B
N/B
N/B
N/B
N/B
N/B
10 × 12 cm
N/B
N/B
N/B
N/B
N/B
N/B
N/B
N/B
N/B
N/B
N/B
Additional information
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
0,5 kg
Gewicht
2 kg
Gewicht
1 kg
Max. Draagkracht
70kg
Gewicht
0,5 kg
Diameter
100mm
Gewicht
0,05 kg
Gewicht
5 kg
Gewicht
5 kg
Draagkracht
100kg
Tafel afmetingen
840x350mm
Hoogtes tafel
383mm, 621mm, 734mm, 810mm
Gewicht
1 kg
Diameter
128mm
As diameter
30mm, 50mm
Snijvlakken
2
Freeshoogte
30mm
Radius
R3/6, R4/8, R5/10
Toerental Min-Max
5900-9700
Gewicht
1,5 kg
Vermogen
180W
Schuuroppervlakte
80x130mm
Ø Rotatie
2mm
Nominale snelheid
12500rpm
Trillingen
25000/min
Gewicht
0,5 kg
Diameter
100mm
Gewicht
1 kg
Diameter
128mm
As diameter
30mm, 50mm
Snijvlakken
2
Freeshoogte
30mm
Radius
R3/6, R4/8, R5/10
Toerental Min-Max
5900-9700
Gewicht
0,05 kg
Diameter
20,7mm
Snijlengte
10mm
Lengte
49mm
Radius
R4
Schacht
8mm
Snijvlakken
2
Gewicht
0,3 kg
Afmetingen
10 × 12 cm
Gewicht
0,05 kg
As diameter
30mm, 50mm
Diameter
45mm, 70mm
Gewicht
1,1 kg
Laad capaciteit
100kg
Gewicht
0,5 kg
Gewicht
0,05 kg
Diameter
8mm
Snijlengte
10mm
Lengte
50mm
Radius
R3
Snijvlakken
2
Gewicht
1 kg
Vermogen
95W
Afmetingen werkvlak
150x150mm
Vacuümdruk
750mbar
Gewicht
0,05 kg
Diameter
18mm
Snijlengte
19mm
Lengte
51mm
Snijvlakken
2
Gewicht
1 kg
Zaagblad diameter
350mm
As diameter
30mm
Tand dikte
3,2mm
Zaagblad dikte
2,2mm
Aantal tanden
24
Meeneemgaten
PH01
Gewicht
1 kg
Gewicht
1 kg
Zaagblad diameter
300mm
As diameter
30mm
Tand dikte
1,8mm
Aantal tanden
56
Gewicht
0,5 kg
Diameter
100mm
Gewicht
2 kg
Meld je aan voor onze nieuwsbrief
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Vergelijken
We gebruiken cookies om ervoor te zorgen dat onze website zo soepel mogelijk draait. Als je doorgaat met het gebruiken van de website, gaan we er vanuit dat je ermee instemt.OkPrivacy policy