Description | Set profielmessen hoogte 40mm Nr. 0006 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | Klein® trimming bits with straight cut are suitable for smooth and well-finished edges on melamine and veneered panels. The ball bearing, having the same diameter of the cutters, trims any overlap leaving a flat and smooth edge. Two flutes provide fast cutting and good chipping ejection. The blades are specially sheared so you can work faster and splinter free. | Specially designed hand gluer for gluing large surfaces with vinyl (white) adhesives. Available in two models with different roll widths and glue container capacities. Model EM26D is equipped with a roll with a width of 122mm and a capacity of 1kg. The larger model EM126D has a roll with a width of 180mm and a capacity of 1.4kg. The machine is equipped with a trigger on the handle for easy opening and closing of the glue container.
Attention: this hand gluer comes standard with a rubber roller, suitable for vinyl (white) adhesives and water-based adhesives. For synthetic adhesives an optional PU roll is available (Ref. 2504065). This hand gluer is also available with an additional adhesive roller at the top for stationary gluing of workpieces from above (models EM25D and EM125T). | Belmash fixed groove cutter for both Belmash combination machines and spindle moulding machines. The groove cutter is used to produce rectangular grooves, to make quarters and to cut along the fibers in different types of wood. It can be used on woodworking machines BELMASH SDM2500, SDMR2500, CBS2400 or spindle moulders with shaft 30mm.
Available in different thicknesses. |
Content | Set profielmessen hoogte 40mm Nr. 0006 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | Klein® trimming bits with straight cut are suitable for smooth and well-finished edges on melamine and veneered panels. The ball bearing, having the same diameter of the cutters, trims any overlap leaving a flat and smooth edge. Two flutes provide fast cutting and good chipping ejection. The blades are specially sheared so you can work faster and splinter free. | Specially designed hand gluer for gluing large surfaces with vinyl (white) adhesives. Available in two models with different roll widths and glue container capacities. Model EM26D is equipped with a roll with a width of 122mm and a capacity of 1kg. The larger model EM126D has a roll with a width of 180mm and a capacity of 1.4kg. The machine is equipped with a trigger on the handle for easy opening and closing of the glue container. Simply press the trigger to run the glue over the roll. Using this trigger you will always obtain the right amount of glue for your project. Thanks to the support, the hand gluer can easily be put away. For cleaning, you can keep this adhesive under water without risk of damage.
Attention: this adhesive comes standard with a rubber roller, suitable for vinyl adhesives and water-based adhesives. For synthetic adhesives an optional PU roll is available (Ref. 2504065). This hand gluer is also available with an additional adhesive roller at the top for stationary gluing of workpieces from above (models EM25D and EM125T). | Belmash fixed groove cutter for both Belmash combination machines and spindle moulding machines. The groove cutter is used to produce rectangular grooves, to make quarters and to cut along the fibers in different types of wood. It can be used on woodworking machines BELMASH SDM2500, SDMR2500, CBS2400 or spindle moulders with shaft 30mm.
Available in different thicknesses.
|
Additional information |
Gewicht |
0,05 kg |
Afmetingen |
0,4 cm |
|
Gewicht |
0,05 kg |
Diameter |
16mm
|
Snijlengte |
16mm
|
Lengte |
56mm
|
Snijvlakken |
2
|
|
Gewicht |
2 kg |
Breedte lijmrol |
122mm, 180mm
|
Inhoud lijmbak |
1kg, 1,4kg
|
|
Gewicht |
N/B |
Tand dikte |
4,0mm, 6,0mm, 8,0mm, 10,0mm, 12,0mm
|
Aantal tanden |
6
|
|