Description | Set profielmessen hoogte 40mm Nr. 0037 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | Sturdy spike fix for use on the PIHER Maxipress F clamps.
Made from forged steel. | Kreg square-head screws made of stainless steel. The screw has a length of 38 mm (1 1/2") and a coarse thread, which makes it ideally suited for softwood. Our stainless steel screws are specially designed for damp environments, exposure to water and other corrosive environments, such as pressure-treated lumber.
This screw is available in packs of 100. | This electric vacuum table is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to Virutex's SVE600 electric vacuum system (not included). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. Because you can place the table both vertically and horizontally, this module is ideal for a wide range of applications.
Using the rubber seals included as standard, you can easily divide the table into smaller sections. Standard delivery with one rubber seal already installed. | Les presseurs Belmash offrent une sécurité accrue lorsque vous travaillez avec votre raboteuse. Planifiez en toute sécurité des poutres ou des planches sur n'importe quelle machine Belmash. La pince assure que la pièce est serrée sur la surface de travail. Cela facilite la circulation des matériaux, vous donnant une finition propre et précise. Ces dispositifs de serrage sont faciles à installer à l'aide des vis et des rondelles. L'ouverture peut être réglée à l'aide d'une poignée sur le dessus et d'une pince à ressort sur le côté. De cette manière, une bonne alimentation et une bonne force de pression sont toujours assurées.
Cette presseur peut être utilisé sur le Belmash SDMR2500. |
Content | Set profielmessen hoogte 40mm Nr. 0037 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | Sturdy spike fix for use on the PIHER Maxipress F clamps.
Made from forged steel. | Kreg square-head screws made of stainless steel. The screw has a length of 38 mm (1 1/2") and a coarse thread, which makes it ideally suited for softwood. Our stainless steel screws are specially designed for damp environments, exposure to water and other corrosive environments, such as pressure-treated lumber.
This screw is available in packs of 100. | This electric vacuum table is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to Virutex's SVE600 electric vacuum system. Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. The table itself must be fixed with screws in the provided holes. Because you can place the table both vertically and horizontally, this module is ideal for a wide range of applications. Clamp workpieces for gluing, milling, trimming, etc...
Using the standard supplied rubber seals, you can easily divide the table into smaller sections. This is very useful for securing small pieces, for example. To secure larger workpieces, you can use multiple modules to prevent sagging. Standard delivery with one rubber seal already installed. | Les presseurs Belmash offrent une sécurité accrue lorsque vous travaillez avec votre raboteuse. Planifiez en toute sécurité des poutres ou des planches sur n'importe quelle machine Belmash. La pince assure que la pièce est serrée sur la surface de travail. Cela facilite la circulation des matériaux, vous donnant une finition propre et précise. Ces dispositifs de serrage sont faciles à installer à l'aide des vis et des rondelles. L'ouverture peut être réglée à l'aide d'une poignée sur le dessus et d'une pince à ressort sur le côté. De cette manière, une bonne alimentation et une bonne force de pression sont toujours assurées.
Cette presseur peut être utilisé sur le Belmash SDMR2500. |
Additional information |
Gewicht |
0,05 kg |
Afmetingen |
0,4 cm |
|
Gewicht |
0,26 kg |
Afmetingen |
11,3 × 5 cm |
|
Gewicht |
0,25 kg |
Stuks in verpakking |
100
|
Lengte |
38mm
|
Materiaal |
Stainless steel
|
|
Gewicht |
0,325 kg |
Afmetingen |
16 × 20 × 2,2 cm |
Vermogen |
95W
|
Afmetingen werkvlak |
150x150mm
|
Vacuümdruk |
750mbar
|
|
Gewicht |
3,3 kg |
Afmetingen |
30 × 26 × 7 cm |
Max. hoogte werkstuk |
63mm
|
Max. breedte werkstuk |
270mm
|
|