Set profielmessen hoogte 50mm Nr. 2001 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Specially designed hand gluer for gluing large surfaces with vinyl (white) adhesives. Available in two models with different roll widths and glue container capacities. Model EM26D is equipped with a roll with a width of 122mm and a capacity of 1kg. The larger model EM126D has a roll with a width of 180mm and a capacity of 1.4kg. The machine is equipped with a trigger on the handle for easy opening and closing of the glue container. At the top there is a second roller (width 92mm) for stationary glueing along the top with the machine.
Attention: this hand gluer comes standard with a rubber roller, suitable for vinyl (white) adhesives and water-based adhesives. For synthetic adhesives an optional PU roll is available (Ref. 2504065). This hand gluer is also available without roller at the top (models EM26D and EM126T).
Unique and safe feed with Morse cone 1, which can be used in both directions.
La TSB2000 est une table de sciage compacte et portable avec une capacité de coupe de 0 à 70 mm. Lorsqu'elle est inclinée à 45°, la lame de scie a toujours une hauteur de coupe de 45 mm. La machine est entraînée par un puissant moteur à induction de 2,7 CV. Le moteur à induction rend cette table de scie compacte beaucoup plus puissante et plus silencieuse que les autres scies à table. Une rainure en T intégrée dans la table de travail est fournie avec un guide d'onglet en acier. La machine est équipée d'un guide inclinable en aluminium qui serre à la fois l'avant et l'arrière. Il y a une connexion pour l'extraction en haut et en bas. Toutes les tailles sont fournies sur des règles en acier claires et réglables.
Vane d'arrêt à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. Avec filetage sur les deux côtés.
Set profielmessen hoogte 40mm Nr. 0095 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Reducer with diameter 100-60mm to be used with the Air Flux dust extractors.
Set profielmessen hoogte 40mm Nr. 0072 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Quick-release center, diameter 5/8"
Lame de scie à 56 dents
Lame de scie à dents de loup pour machines classiques, adaptée à la coupe rapide de différents types de bois, de bois humide ou de forêt. A utiliser sur les machines de chantier ou de construction, mais surtout pour les scies à bois de chauffage. Toute la lame de scie est finie en acier au chrome-vanadium de haute qualité. Made in Germany, profitez de la solide qualité allemande. Il est facile de s'affûter.
Cettes fraises à coupe droite conviennent aux bords lisses et bien finis des panneaux stratifiés et plaqués. Le roulement, ayant le même diamètre que les fraises, coupe tout chevauchement en laissant un bord plat et lisse. Grâce à ses tranchants en carbure de haute qualité (widia), cette fraise peut être utilisée sur la plupart des types de bois.
Disponible en différentes longueurs de coupe.
BOW push stick made of PA, high density EVA foam grip: reversible and replaceable.
This Belmash mortising table is compatible with the SDM2500 machine. The mortising table can be installed instead of the milling table. The mortising table can be fully adjusted in height and left / right. Includes two clamps for fixation of the workpiece.
Set profielmessen hoogte 40mm Nr. 0063 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Beweegbare bek voor gietijzeren lijmklem Maxipress E, systeem met volledig beschermde schroefdraad
Cette fraise à percer et affleurer peut être utiliser pour facilement percer et couper des ouvertures dans les plans de travail laminés. Le point 'V' peut facilement percer la couche supérieure des stratifiés. Le face à couper en carbide vous donne une finition parfait pour tous votre projets. La base de la fraise agit comme un guide suiveur.
Lame de scie avec 44 dents
Lame de scie avec denture alternée, brise-copeaux et conception anti-kickback. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour la coupe de bois dur et tendre. Peut également être utilisé pour le sciage de panneaux d'aggloméré ou de bois collé sur une face. Idéal pour les scies de chantier ou les scies circulaires à chevalet. Made in Germany, profitez de la solide qualité allemande.
Raccord en coude 90° et diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux.
SHOWROOM MODEL - NEW
Plunge saw TT55 + carrying case + guide rail 1400mm
The TT55 is a plunge-cut saw with a robust and ergonomic design and a cutting range of up to 55 mm. In addition, it can cut to within 13.5 mm of a vertical edge. Using the guide rail, which comes as a standard, you always make perfectly straight and stable cuts. The rail also has an elastic rubber edge that prevents splintering. Thanks to its powerful 1150 W (5000 rpm) motor, this machine cuts easily through different materials. The saw blade's quick stop and automatic shut-off on overload provide increased safety. Thanks to the anti-slip coating on the rear handle, you always have full control of the machine while working. It is equipped with a handle, allowing the easy replacement of the saw blade.
Mèche carbure droite double à utiliser sur le rainureuse Virutex RA17VG. Cette fraise permet de fraiser les joints en silicone de type FS1 ou FS3.
Gabarit de fraisage à utiliser sur la fraise Virutex FR129VB pour les charnières de porte pour fraiser Argenta Invisible Large. Ce moule ne convient que pour le modèle Invisible Large d’Argenta Autres modèles disponibles. Charnière non comprise..
Deze zuignap is gemaakt voor het lijmen van meerdere materialen op elkaar. Volledig vervaardigd uit ABS plastic. Diameter van de zuignap 7,8cm.
Saw blade with 36 teeth
Saw blade with flat teeth, chip breakers and anti-kickback design. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for both shortening and longitudinal cutting of hard and soft types of wood. Made in Germany, take advantage of the extremely solid German quality.
Set profielmessen hoogte 40mm Nr. 0051 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Ces raboteuses et scies portables et compactes 230V sont uniques sur le marché. Largeur de rabotage de 200 mm et hauteur de coupe de 97 mm dans une seule machine. Equipé d'un moteur à induction de 2,8 CV.
Groefzaagblad met vlakke (FZ), widia zaagtanden om groeven te trekken in hardhout, zacht hout, gelamineerde panelen en andere producten op basis van hout. De zaagbladen hebben een asgat van 30mm en zijn ideaal voor gebruik op freesmachines of op zaagtafels.
Dit zaagblad is beschikbaar in verschillende diameters
Rouleau pour placer et presser les joints en silicone de type FS1 - FS2 - FS3 et FS4. Ces joints peuvent être placés à l'aide de la rainureuse Virutex RA17VG.
Push-pull quick clamps made of steel, with PVC handle and soft neoprene pressure foot to prevent damage to your workpiece. The clamps are available in different sizes and clamping force. All necessary dimensions can be found in the photos.
M4 model with mounting plate, M6 and M8 with nut mounting.
De Sparky accuboor- en schroefmachine is een hebbedingetje voor de handige klusser. Deze krachtige, pneumatische boormachine kan in de twee draairichtingen (links en rechts) boren. Om het gebruiksgemak te verhogen, werd de machine voorzien een accu (laadtijd, 1 uur). Het ergonomisch handvat met softgrip en de Quick-stop houden het werk veilig, doch efficiënt. In de snelspankop kunnen drill bits tot 10 mm geplaatst worden. Tenslotte kan deze ook gebruikt worden als slijpmachine en poetsmachine.
Les fraises Klein® à coupe droite conviennent aux chants lisses et bien finis des panneaux de mélamine et de placage. Le roulement, ayant le même diamètre que les fraises, coupe tout chevauchement en laissant un bord plat et lisse. Deux faces de coupe assurent une coupe rapide et une bonne éjection des copeaux. Les lames sont spécialement cisaillées pour que vous puissiez travailler plus rapidement et sans éclats.
Set profielmessen hoogte 40mm Nr. 0053 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Lichte en krachtige mini vlakschuurmachine voor het polijsten en afwerken van uw werkstukken. Deze machine onderscheidt zich van het model LR84H door zijn dubbele beweging. De schuurzool beweegt zowel roterend als excentrisch. Standaardlevering met Delta opzetstuk en ronde schuurplaat (Ø125mm). Voorzien van een geïntegreerde stofafzuiging en stofzak. Met elektronische snelheidsregeling en remsysteem voor de schuurzool.
Optioneel verkrijgbaar in een handige PVC koffer.
Dissolves stubborn dirt such as oil, grease, wax, tar, rubber, wear marks and adhesive or silicone residues. Can also be used as a degreaser. Netspray removes residues from self-adhesive labels and is very effective for cleaning prior to the application of adhesives. Recommended to use when working with the edge adhesives from the Virutex range. Irriteert de huid niet en heeft een aangename citrusgeur.
Ø 100mm Keyed hose clamps have a thumbscrew that allows you to quickly tighten or loosen without a screwdriver or wrench. Makes setting up, modifying or cleaning your dust collection system easier! For use with Ø 100 mm extraction hoses and connectors.
Set of 5 pieces.
De TT305X is een kap- en verstekzaag met een geruisloze inductiemotor van 1600 W die geen onderhoud nodig heeft (wat een groot voordeel is ten opzichte van de koolborstelmotor in de kleinere modellen). Door haar compactheid is ze bijzonder handig om mee te nemen bij werken op verplaatsing.
Saw blade with 56 teeth
Wolf tooth saw blade for classic machines, suitable for fast cutting of different types of wood, wet wood or brush wood. To be used on yard or construction machinery but mainly suitable for firewood saws. The entire saw blade is finished in high quality Chrome-vanadium steel. Made in Germany, take advantage of the extremely solid German quality. Easy to sharpen yourself.
Cet outil pratique vous permet de régler vos couteaux ou fers de raboteuse rapidement, facilement et avec précision. À l'aide des aimants, l'outil se fixe sur l'arbre de la raboteuse. Vous pouvez alors placer le fer dans la bonne position en un rien de temps. Livraison standard dans une caisse en bois soignée.
Set profielmessen hoogte 40mm Nr. 0052 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Deze zelfklemmende klemwagen is de oplossing voor het makkelijk transporteren van deuren, omlijstingen, platen e.d. voor op de bouw en op de werkvloer en heeft een draagvermogen tot 200 kg.
Set profielmessen hoogte 40mm Nr. 0049 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Spantanghouder met schacht M16 om op de as van uw freesmachine te plaatsen. Te gebruiken met spantang T117 om bovenfrezen met schacht diameter 8mm, 10mm of 12mm te monteren.
Lame de scie à 56 dents
Lame de scie à dents de loup pour machines classiques, adaptée à la coupe rapide de différents types de bois, de bois humide ou de forêt. A utiliser sur les machines de chantier ou de construction, mais surtout pour les scies à bois de chauffage. Toute la lame de scie est finie en acier au chrome-vanadium de haute qualité. Made in Germany, profitez de la solide qualité allemande. Il est facile de s'affûter.
Volledige set buizen en accessoires voor bevestiging aan de muur in atelier, om met één stofzuiger afzuiging te voorzien aan elke machine.
Content
Set profielmessen hoogte 50mm Nr. 2001 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Specially designed hand gluer for gluing large surfaces with vinyl (white) adhesives. Available in two models with different roll widths and glue container capacities. Model EM25D is equipped with a roll with a width of 122mm and a capacity of 1kg. The larger model EM125T has a roll with a width of 180mm and a capacity of 1.4kg. The machine is equipped with a trigger on the handle for easy opening and closing of the glue container. Simply press the trigger to run the glue over the roll. Using this trigger you will always obtain the right amount of glue for your project. Thanks to the support, the hand gluer can easily be put away. For cleaning, you can keep this adhesive under water without risk of damage. At the top there is a second roller (width 92mm) for stationary glueing along the top with the machine.
Attention: this adhesive comes standard with a rubber roller, suitable for vinyl adhesives and water-based adhesives. For synthetic adhesives an optional PU roll is available (Ref. 2504065). This hand gluer is also available without roller at the top (models EM26D and EM126T).
Unique en safe feed with Morse cone 1.
The toothed ring skids when overloaded. This feed can be used in both directions.
La TSB2000 est une table de sciage compacte et portable avec une capacité de coupe de 0 à 70 mm. Lorsqu'elle est inclinée à 45°, la lame de scie a toujours une hauteur de coupe de 45 mm. La machine est entraînée par un puissant moteur à induction de 2,7 CV. Le moteur à induction rend cette table de scie compacte beaucoup plus puissante et plus silencieuse que les autres scies à table. Une rainure en T intégrée dans la table de travail est fournie avec un guide d'onglet en acier. La machine est équipée d'un guide inclinable en aluminium qui serre à la fois l'avant et l'arrière. Il y a une connexion pour l'extraction en haut et en bas. Toutes les tailles sont fournies sur des règles en acier claires et réglables.
Vane d'arrêt à diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux. Avec filetage sur les deux côtés.
Set profielmessen hoogte 40mm Nr. 0095 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Reducer with diameter 100-60mm to be used with the Air Flux dust extractors.
Set profielmessen hoogte 40mm Nr. 0072 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Quick-release center, diameter 5/8"
Lame de scie à 56 dents
Lame de scie à dents de loup pour machines classiques, adaptée à la coupe rapide de différents types de bois, de bois humide ou de forêt. A utiliser sur les machines de chantier ou de construction, mais surtout pour les scies à bois de chauffage. Toute la lame de scie est finie en acier au chrome-vanadium de haute qualité. Made in Germany, profitez de la solide qualité allemande. Il est facile de s'affûter.
Cettes fraises à coupe droite conviennent aux bords lisses et bien finis des panneaux stratifiés et plaqués. Le roulement, ayant le même diamètre que les fraises, coupe tout chevauchement en laissant un bord plat et lisse. Grâce à ses tranchants en carbure de haute qualité (widia), cette fraise peut être utilisée sur la plupart des types de bois.
The PushPRO Push stick offers an unprecedented safety improvement and innovative new advantages in a tool category that has hardly seen any innovations for years.
With the High Density EVA tips, the PushPRO improves feed control, protects the wood and protects you and your tools in case of accidental contact between the push stick and the saw blade.
The PushPRO prevents the use of plastic to guide the wood. When pressure is applied, plastic can affect the porosity of some woods.
Plastic does not absorb vibrations due to the high-density foam used in the PushPRO. PushPRO provides a better cut than a plastic push stick.
This Belmash mortising table is compatible with the SDM2500 machine. The mortising table can be installed instead of the milling table. The mortising table can be fully adjusted in height and left / right. Includes two clamps for fixation of the workpiece.
Set profielmessen hoogte 40mm Nr. 0063 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Beweegbare bek voor klem Maxipress E
Cette fraise à percer et affleurer peut être utiliser pour facilement percer et couper des ouvertures dans les plans de travail laminés. Le point 'V' peut facilement percer la couche supérieure des stratifiés. Le face à couper en carbide vous donne une finition parfait pour tous votre projets. La base de la fraise agit comme un guide suiveur.
Lame de scie avec 44 dents
Lame de scie avec denture alternée, brise-copeaux et conception anti-kickback. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour la coupe de bois dur et tendre. Peut également être utilisé pour le sciage de panneaux d'aggloméré ou de bois collé sur une face. Idéal pour les scies de chantier ou les scies circulaires à chevalet. Made in Germany, profitez de la solide qualité allemande.
Raccord en coude 90° et diamètre 100mm à utiliser avec les systèmes d'aspiration Air Flux.
The TT55 is a plunge-cut saw with a robust and ergonomic design and a cutting range of up to 55 mm. In addition, it can cut to within 13.5 mm of a vertical edge. Using the guide rail, which comes as a standard, you always make perfectly straight and stable cuts. The rail also has an elastic rubber edge that prevents splintering. The saw fits directly on the rail, without additional accessories. Thanks to its powerful 1150 W (5000 rpm) motor, this machine cuts easily through different materials. The motor is equipped with a soft start to prevent shocks at startup. The rapid stop of the saw blade and automatic shutdown in the event of an overload provide increased safety. Thanks to the anti-slip coating on the rear handle, you always have full control of the machine while working. It is equipped with a handle, allowing the easy replacement of the saw blade.
As a standard, this plunge-cut saw comes with a 28-teeth saw blade and a diameter of 160 mm and a bore of 20 mm. Standard equipment further includes a handy carrying case and the 1400 mm guide rail.
The Multi Rolls saw blade is also available as an option. This saw blade has a non-stick coating, a diameter of 160 mm and 48 teeth. It is ideal for cutting hard and exotic solid wood, kitchen board, thermoplastic, laminate, MDF, particle board, etc. The guide rail can be extended by means of an additional 800 or 1400 mm guide rail and a connection kit. Furthermore, we also recommend the T-Track Quick clamp to secure the workpiece to the guide rail.
With the 125-mm diameter grooving saw blade and faceted V-tooth, you can also use this plunge-cut saw perfectly to make paneling in hardwood, softwood, laminated panels and other wood-based products.
Mèche carbure droite double à utiliser sur le rainureuse Virutex RA17VG. Cette fraise permet de fraiser les joints en silicone de type FS1 ou FS3.
Gabarit de fraisage à utiliser sur la fraise Virutex FR129VB pour les charnières de porte pour fraiser Argenta Invisible Large. Ce moule ne convient que pour le modèle Invisible Large d’Argenta Autres modèles disponibles. Charnière non comprise.
Deze zuignap is gemaakt voor het lijmen van meerdere materialen op elkaar. Volledig vervaardigd uit ABS plastic. Diameter van de zuignap 7,8cm.
Saw blade with 36 teeth
Saw blade with flat teeth, chip breakers and anti-kickback design. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for both shortening and longitudinal cutting of hard and soft types of wood. Made in Germany, take advantage of the extremely solid German quality.
Set profielmessen hoogte 40mm Nr. 0051 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Ces raboteuses et scies portables et compactes 230V sont uniques sur le marché. Par rapport à toutes les autres machines plus petites, elles fonctionnent avec des moteurs à induction très puissants.
Un moteur à induction a 30% de puissance en plus qu'un moteur à balais de charbon et est plus de 40% plus silencieux. De plus, il ne nécessite aucun entretien car aucun balai de charbon n'a besoin d'être remplacé. De plus, ils sont entraînés de manière industrielle au moyen de courroies poly au lieu des courroies trapézoïdales classiques. La construction du cadre est également très unique et robuste, car une tôle d'acier de 3,5 mm d'épaisseur est utilisée. L'ensemble garantit d'excellentes performances, mais également une résistance optimale pour votre machine.
Changement très rapide de la fonction de rabotage à la fonction de sciage en repositionnant la courroie.
La particularité de ceci est que ces modèles fonctionnent avec un bloc de couteaux séparé pour chaque opération. L'entraînement indépendant fournit la vitesse idéale pour le rabotage et le sciage, de sorte que la raboteuse et la scie tournent également séparément pour plus de sécurité. Grâce au système de micro-levage des tables de rabotage, la profondeur de rabotage peut être réglée très précisément et en douceur, mais les tables peuvent également être fermées complètement de manière rapide. En fermant complètement les tables, la table de scie a une grande surface de travail. Cet Universal 2.0 a une lecture très claire et précise pour chaque paramètre.
Le guide peut être bloqué à la fois devant et derrière la table de travail, ce qui garantit un travail stable et précis. Il peut également être réglé en angle ou en onglet avec une lecture très claire, et ceci aussi bien pour le rabotage que pour le sciage. Pour la machine à scier, il existe également une jauge à onglets avec indication claire des degrés. La machine est conçue pour fonctionner avec des fraises à rainurer jusqu'à 10 mm d'épaisseur.
La construction de haute qualité de ces machines compactes telles que la tôle d'acier épaisse, l'entraînement direct, les moteurs à induction, les roulements à billes de haute qualité, le grand ensemble robuste et les poignées rotatives confèrent à cette machine un énorme confort d'utilisation avec d'excellentes performances et une durée de vie optimale.
Les machines multifonctionelle portable et equipe standard de guide de scieage, scie, couteaux, coin de fente, poignee, outils de rabotage
Groefzaagblad met vlakke (FZ), widia zaagtanden om groeven te trekken in hardhout, zacht hout, gelamineerde panelen en andere producten op basis van hout. De zaagbladen hebben een asgat van 30mm en zijn ideaal voor gebruik op freesmachines of op zaagtafels.
Dit zaagblad is beschikbaar in verschillende diameters
Rouleau pour placer et presser les joints en silicone de type FS1 - FS2 - FS3 et FS4. Ces joints peuvent être placés à l'aide de la rainureuse Virutex RA17VG.
Push-pull quick clamps made of steel, with PVC handle and soft neoprene pressure foot to prevent damage to your workpiece. The clamps are available in different sizes and clamping force. All necessary dimensions can be found in the photos.
M4 model with mounting plate, M6 and M8 with nut mounting.
De Sparky accuboor- en schroefmachine (14,4V /1,5 Ah – 18V /1,5 Ah) is een hebbedingetje voor de handige klusser. Deze krachtige, pneumatische boormachine kan in de twee draairichtingen (links en rechts) boren en is elektronisch regelbaar (inclusief elektrische rem). Om het gebruiksgemak te verhogen, werd de machine voorzien een accu (laadtijd, 1 uur). Het ergonomisch handvat met softgrip en de Quick-stop houden het werk veilig, doch efficiënt. In de snelspankop kunnen drill bits tot 10 mm geplaatst worden. Tenslotte kan deze ook gebruikt worden als slijpmachine en poetsmachine.
Inclusief 2x accu , lader , koffer , clip
Les fraises Klein® à coupe droite conviennent aux chants lisses et bien finis des panneaux de mélamine et de placage. Le roulement, ayant le même diamètre que les fraises, coupe tout chevauchement en laissant un bord plat et lisse. Deux faces de coupe assurent une coupe rapide et une bonne éjection des copeaux. Les lames sont spécialement cisaillées pour que vous puissiez travailler plus rapidement et sans éclats.
Set profielmessen hoogte 40mm Nr. 0053 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Lichte en krachtige mini vlakschuurmachine voor het polijsten en afwerken van uw werkstukken. Deze machine onderscheidt zich van het model LR84H door zijn dubbele beweging. De schuurzool beweegt zowel roterend als excentrisch. Het ergonomische ontwerp zorgt voor een perfecte houvast en comfortabel werken. Al de bedieningselementen zijn eenvoudig bereikbaar tijdens het werken. Standaardlevering met Delta opzetstuk om moeilijk te bereikbare plaatsen zoals hoeken of jaloezieën toch te kunnen schuren. Het Delta stuk is zowel boven- als onderaan voorzien van klittenband / velcro om schuurpapier te bevestigen. Nog standaard geleverd met een ronde schuurplaat (Ø125mm). Voorzien van een geïntegreerde stofafzuiging en stofzak. Met elektronische snelheidsregeling en remsysteem voor de schuurzool.
Optioneel verkrijgbaar in een handige PVC koffer.
Dissolves stubborn dirt such as oil, grease, wax, tar, rubber, wear marks and adhesive or silicone residues. Can also be used as a degreaser. Netspray removes residues from self-adhesive labels and is very effective for cleaning prior to the application of adhesives. Recommended to use when working with the edge adhesives from the Virutex range. Irriteert de huid niet en heeft een aangename citrusgeur.
Ø 100mm Keyed hose clamps have a thumbscrew that allows you to quickly tighten or loosen without a screwdriver or wrench. Makes setting up, modifying or cleaning your dust collection system easier! For use with Ø 100 mm extraction hoses and connectors.
Set of 5 pieces.
De TT305X is een kap- en verstekzaag met een geruisloze inductiemotor van 1600 W die geen onderhoud nodig heeft (wat een groot voordeel is ten opzichte van de koolborstelmotor in de kleinere modellen). Door haar compactheid is ze bijzonder handig om mee te nemen bij werken op verplaatsing.
Het gebruik van kogellagers op alle gewrichten zorgt voor een precieze draaibeweging van de tafel, de kop en het kantelsysteem. De compacte zaag heeft een persgegoten aluminium behuizing en een duidelijke verstekaanduiding. De geruisloze, onderhoudsvrije inductiemotor van 1600 W levert 30 % meer kracht en is 40 % stiller dan een koolborstelmotor. Het zaagblad heeft een diameter van 305 mm en 60 tanden.
De TT305X is verder uitgerust met een ergonomische verticale D-handgreep, die ervoor zorgt dat de op- en neerbeweging eerder vanuit de pols dan vanuit de schouder uitgevoerd wordt. Een bijkomend voordeel van deze handgreep is dat hij zowel met de linker- als met de rechterhand gebruikt kan worden.
Saw blade with 56 teeth
Wolf tooth saw blade for classic machines, suitable for fast cutting of different types of wood, wet wood or brush wood. To be used on yard or construction machinery but mainly suitable for firewood saws. The entire saw blade is finished in high quality Chrome-vanadium steel. Made in Germany, take advantage of the extremely solid German quality. Easy to sharpen yourself.
Cet outil pratique vous permet de régler vos couteaux ou fers de raboteuse rapidement, facilement et avec précision. À l'aide des aimants, l'outil se fixe sur l'arbre de la raboteuse. Vous pouvez alors placer le fer dans la bonne position en un rien de temps. Livraison standard dans une caisse en bois soignée.
Set profielmessen hoogte 40mm Nr. 0052 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Deze zelfklemmende platenklemwagen is de oplossing voor het makkelijk transporteren van deuren, omlijstingen, platen e.d. voor op de bouw en op de werkvloer en heeft een draagvermogen tot 200 kg. Wanneer het materiaal in de Easy Roller wordt geplaatst, klemt deze vanzelf ,door zijn scharnierende werking, het materiaal zelf vast. Wat voorheen met twee mensen gedragen werd, kan nu alleen met behulp van de Easy Roller wat overmatig fysieke belasting op het lichaam voorkomt. De Easy Roller is voorzien van een stevige beschermlaag om beschadiging aan het te transporteren materiaal te voorkomen.
Set profielmessen hoogte 40mm Nr. 0049 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Spantanghouder met schacht M16 om op de as van uw freesmachine te plaatsen. Te gebruiken met spantang T117 om bovenfrezen met schacht diameter 8mm, 10mm of 12mm te monteren.
Lame de scie à 56 dents
Lame de scie à dents de loup pour machines classiques, adaptée à la coupe rapide de différents types de bois, de bois humide ou de forêt. A utiliser sur les machines de chantier ou de construction, mais surtout pour les scies à bois de chauffage. Toute la lame de scie est finie en acier au chrome-vanadium de haute qualité. Made in Germany, profitez de la solide qualité allemande. Il est facile de s'affûter.
Ensemble complet de tubes et d'accessoires à monter au mur dans l'atelier. Ce kit mural est idéal pour les petits ateliers : avec un seul aspirateur, la poussière est évacuée de chaque machine.
Weight
0,05 kg
2 kg
N/B
40 kg
0,5 kg
0,05 kg
0,05 kg
0,05 kg
N/B
1 kg
0,05 kg
1 kg
9,7 kg
0,05 kg
0,93 kg
0,05 kg
1 kg
0,5 kg
5 kg
0,05 kg
0,1 kg
0,5 kg
1 kg
0,05 kg
36 kg
1 kg
0,1 kg
N/B
2,1 kg
0,05 kg
0,05 kg
1,5 kg
0,4 kg
0,2 kg
13 kg
1 kg
0,5 kg
0,05 kg
4,5 kg
0,05 kg
0,5 kg
1 kg
2 kg
Dimensions
0,5 cm
N/B
N/B
76 × 55 × 36 cm
N/B
0,4 cm
N/B
0,4 cm
N/B
N/B
N/B
N/B
34 × 18,5 cm
0,4 cm
N/B
N/B
N/B
N/B
355 × 260 × 320 cm
N/B
N/B
N/B
N/B
0,4 cm
N/B
N/B
N/B
N/B
N/B
N/B
0,4 cm
N/B
N/B
N/B
N/B
N/B
N/B
0,4 cm
N/B
0,4 cm
N/B
N/B
N/B
Additional information
Gewicht
0,05 kg
Afmetingen
0,5 cm
Gewicht
2 kg
Breedte lijmrol onderaan
122mm, 180mm
Breedte lijmrol bovenaan
92mm
Inhoud lijmbak
1kg, 1,4kg
Morseconus
1
Gewicht
40 kg
Afmetingen
76 × 55 × 36 cm
Zaagdiepte 45°
45 mm
Kanteling
45°
Zaagblad diameter
280mm
As diameter
30mm
Toerental zaagblad
2850
Gewicht
0,5 kg
Diameter
100mm
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
0,05 kg
Diameter
60mm, 100mm
Gewicht
0,05 kg
Afmetingen
0,4 cm
Diameter
15,9 mm
Gewicht
1 kg
Zaagblad diameter
600mm
As diameter
30mm
Tand dikte
2,8mm
Aantal tanden
56
Gewicht
0,05 kg
Diameter
12,7mm
Snijlengte
25mm, 38mm, 51mm
Lengte
84mm, 98mm, 106mm
Schacht
12mm
Snijvlakken
2
Gewicht
1 kg
Gewicht
9,7 kg
Afmetingen
34 × 18,5 cm
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
0,93 kg
Gewicht
0,05 kg
Diameter
8mm
Snijlengte
19mm
Lengte
63mm
Snijvlakken
1+1
Gewicht
1 kg
Zaagblad diameter
500mm
As diameter
30mm
Tand dikte
4,0mm
Aantal tanden
44
Gewicht
0,5 kg
Diameter
100mm
Gewicht
5 kg
Afmetingen
355 × 260 × 320 cm
Vermogen
1150 W
Zaagblad diameter
160mm
Zaagdiepte 45°
35mm
Zaagdiepte 90°
55mm
Nominale snelheid
5000 rpm
Gewicht
0,05 kg
Gewicht
0,1 kg
Gewicht
0,5 kg
Diameter
7,8cm
Gewicht
1 kg
Zaagblad diameter
500mm
As diameter
30mm
Tand dikte
3,6mm
Aantal tanden
36
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
36 kg
Motor
2.8 PK
Zaagdiepte 90°
97mm
Schaafbreedte
200 mm
Zaagblad diameter
250mm
Voltage
230 V
Gewicht
1 kg
Zaagblad diameter
125mm, 150mm, 180mm
As diameter
30mm
Tand dikte
4,0mm
Zaagblad dikte
2,8mm
Aantal tanden
12, 18, 24
Gewicht
0,1 kg
Gewicht
N/B
Afmetingen
N/B
Schroefdraad
M4, M6, M8
Klemkracht
45kg, 90kg, 130kg
Gewicht
2,1 kg
Instelbare slipkoppeling
24 standen
max afmeting boor drills
10 mm
Aandraaimoment
30 Nm
Toerental onbelast
0-300
Maximum diameter boor
hout (28 mm) / steen (10 mm) / metaal (10 mm)
Gewicht
0,05 kg
Diameter
19mm
Snijlengte
16mm
Lengte
60mm
Snijvlakken
2
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
1,5 kg
Vermogen
180W
Schuuroppervlakte
80x130mm
Ø Rotatie
2mm
Nominale snelheid
7000-12500rpm
Trillingen
14000-25000/min
Gewicht
0,4 kg
Gewicht
0,2 kg
Diameter
98-105mm, 100mm
Gewicht
13 kg
Max. zaagdikte
107 mm
Vermogen
1650 W
Snede 0° x 0°
155 x 106 mm
Snede 0° x 45°
155 x 50 mm
Snede 45° x 0°
110 x 106 mm
Snede 45° x 45°
100 x 50 mm
Zaagblad diameter
305mm
Toerental zaagblad
4600
Gewicht
1 kg
Zaagblad diameter
400mm
As diameter
30mm
Tand dikte
2,0mm
Aantal tanden
56
Gewicht
0,5 kg
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
4,5 kg
Draagvermogen
200 kg
Max. klemdikte
120 mm
Materiaal
staal 2,5 mm dikte, pneumatische wielen
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
0,5 kg
Gewicht
1 kg
Zaagblad diameter
450mm
As diameter
30mm
Tand dikte
2,2mm
Aantal tanden
56
Gewicht
2 kg
Meld je aan voor onze nieuwsbrief
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Vergelijken
We gebruiken cookies om ervoor te zorgen dat onze website zo soepel mogelijk draait. Als je doorgaat met het gebruiken van de website, gaan we er vanuit dat je ermee instemt.OkPrivacy policy