Set profielmessen hoogte 90mm Nr. 5332 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
SHOWROOM MODEL - NEW
The TT140 is a spindle sander with oscillating motion and tilting work table, which comes standard with 3 sanding spindles.
Extensions for the wheel kit WK600. Use the two bars (length: 915mm) to replace the original ones from your wheel kit. Transport larger machines without loss of carrying capacity.
The Belmash clamping devices provide increased safety when working with your thicknessing machine. Safely plane beams or boards on any Belmash machine. The pusher ensures that the workpiece is clamped to the work surface. This facilitates the flow of material, giving you a clean and precise finish. These clamping devices are easy to install using the screws and washers. The opening can be adjusted by means of a handle on the top and the spring clip on the side. In this way, a good supply and pressure force is always assured.
This pusher is suitable for use on the Belmash Universal 2000.
Sturdy, high precision mould made from a 12mm thick HPL panel. The mould is suitable for milling and assembly of worktops with a width of minimum 420mm and maximum 650mm. The angle at which you can assemble the worktops is 45° or 90°. It is also possible to use the round templates in this mould to round off your worktops, or to give them a round angle. The mould is very easy to assemble thanks to the lettered holes and the supplied (3) stoppers in steel. Supplied as standard with adjustable stop for a perfect position and the possibility to eliminate a false right angle (e.g. between the wall and the panel). Milling time about 15 minutes for both sides of a worktop.
Reducer diameter 100-50mm to be used with the Air Flux dust extractors.
Groefzaagblad met vlakke (FZ), widia zaagtanden om groeven te trekken in hardhout, zacht hout, gelamineerde panelen en andere producten op basis van hout. De zaagbladen hebben een asgat van 30mm en zijn ideaal voor gebruik op freesmachines of op zaagtafels.
Dit zaagblad is beschikbaar in verschillende diameters
Gabarit de fraisage à utiliser sur la fraise Virutex FR129VB pour les charnières de porte pour fraiser Argenta 80/80. Ce moule ne convient que pour le modèle 80/80 d'Argenta. Autres modèles disponibles. Charnière non comprise.
Deze zware freeswagen loopt op kogellagers. Te monteren op de Spindle TT800IT freesmachine uit de Revolution reeks.
Lame de scie à 56 dents
Lame de scie à dents de loup pour machines classiques, adaptée à la coupe rapide de différents types de bois, de bois humide ou de forêt. A utiliser sur les machines de chantier ou de construction, mais surtout pour les scies à bois de chauffage. Toute la lame de scie est finie en acier au chrome-vanadium de haute qualité. Made in Germany, profitez de la solide qualité allemande. Il est facile de s'affûter.
Straight router bits from Sistemi Klein ensure smooth and well-finished edges. Suitable for trimming and milling with portable routers. Work more easily using the ball bearing on the shank. The placement of the cutting edges ensures that this router bit can also do machining which requires plunging.
Two flutes provide fast cutting and good chipping ejection. Thanks to the cutting edges in high quality carbide metal, you can use this bit effortlessly on most types of wood.
Le TT70H est un support à rouleau pliable et réglable en hauteur sur roulement à billes. Ce modèle d'entrée de gamme est spécifiquement destiné aux bricoleurs.
Cutter head in light metal with knives in high quality tungsten carbide (HW) for jointing. Thanks to the tungsten carbide blades, this grooving cutter cuts effortlessly through solid boards or solid woods. Simply mill one side of the workpiece. Then turn the wood over and mill again. Both parts fit together perfectly and thanks to the larger contact surface you obtain a stronger adhesive bond. To be used on wood of thickness between 26mm and 58mm.
Available with bore 30mm or 50mm. This cutter has been specifically developed for the across the grain joints. For along the grain joints it is recommended to use art. ST-YH152AAM.
Rails for the universal workbench from Kreg Work in an organised and pleasant workplace with the universal workbench from Kreg®. Easily create a workbench, assembly table, tool stand or outfeed table to suit your space, projects and needs. You can personalise your workbench with the different sizes of rails.
This stop is made for the Piher TCP Piston clamp for welding tables. Galvanized and made of carbon steel.
The BOW FeatherDUO featherboard is a stackable version for higher workpieces. Like the FeatherPRO, it features an innovative use of high-density EVA Foam / foam feathers and clamping system that increase control over insertion, dramatically improve recoil and better protect your wood from damage. This compared to the general plastic feaherboards. EVA is a high density, closed cell material with long life that you don't have with the common plastic featherboards. Ideal for table saws, routers, guides
Extendable guide and support for use with Virutex' adjustable table MT58K. Ideal for cutting long pieces with great precision and stability. Rapid adjustment of the length by scales and stops graduated in millimetres. Foldable and easy to transport.
Deze elektrische vacuümtafel op kantelbare steun is ontworpen om gladde, niet poreuze werkstukken vast te klemmen. Om de tafel vacuüm te maken dient ze aangesloten te zijn op het elektrische vacuümsysteem SVE600 van Virutex (standaard inbegrepen). Dankzij het compacte formaat is deze vacuümtafel zowel geschikt om in het atelier te gebruiken als daarbuiten. De kop van de steun kan 90° kantelen zodat u het werkstuk in een ideale positie kan plaatsen. De steun moet vastgezet worden met klemmen (niet inbegrepen).
Met behulp van de standaard geleverd rubber dichtingen verdeelt u de tafel eenvoudig in kleinere secties. Standaardlevering met één rubber dichting al geïnstalleerd en een transparante tube voor de luchttoevoer met 1/4" snelkoppeling.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Set profielmessen hoogte 40mm Nr. 0048 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Kit de roues universel à utiliser sous votre machine à bois. Capacité de charge maximale de 600 kg sur une taille maximale de 750x860 mm.
Saw blade met 20 teeth
Multipurpose saw blade with few and FZ flat teeth to quickly cut along and against grain of all natural wood. For use on table saws. No noise saw blades.
Deze zelfklemmende klemwagen is de oplossing voor het makkelijk transporteren van deuren, omlijstingen, platen e.d. voor op de bouw en op de werkvloer en heeft een draagvermogen tot 200 kg.
Grâce à sa forme ergonomique, ce poignée vous permet de transporter facilement des panneaux dans différents matériaux. Le poignée a trois fonctions de base : tirer, porter ou soulever. Grâce à sa conception en aluminium, ce poignée est très solide et robuste. La charge maximale est de 70 kg. Convient aux panneaux d'une épaisseur comprise entre 0 mm et 46 mm.
En option, deux pinces sont disponibles pour être placées sur le levier.
Set profielmessen hoogte 40mm Nr. 0014 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Deze boor is verkrijgbaar in twee verschillende lengtes
Set profielmessen hoogte 40mm Nr. 0061 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Works with all machines up to 7.5 KW. Connect several machines so that they can be started up together. Use this simultaneous starter when combining a woodworking machine and dust extractor. The starter motor ensures that your dust extraction system starts up automatically four seconds after you start up your woodworking machine yourself. After stopping your woodworking machine, extraction is also stopped a few seconds later. These extra few seconds of suction ensure that your pipes are always clean.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Content
Set profielmessen hoogte 90mm Nr. 5332 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
With this oscillating spindle sander, sanding round pieces becomes child's play.
This tabletop model is compatible with several thicknesses of sanding spindles. Thanks to the up and down movement (oscillation) of the sanding spindle, the sander does not leave streaks on the wood. It comes standard with three sanding spindles (20 x 90 mm, 35 x 140 mm and 50 x 140 mm) and five table inserts. The on-off switch has an undervoltage release, in accordance with IP54. The machine is further equipped with an extraction outlet on which a dust catcher can be placed. A convenient shelf is provided on the frame on which the sanding sleeves and table inserts can be placed.
The work table can be tilted 45° for oblique sanding.
Extensions for the wheel kit WK600. Use the two bars (length: 915mm) to replace the original ones from your wheel kit. Transport larger machines without loss of carrying capacity.
The Belmash clamping devices provide increased safety when working with your thicknessing machine. Safely plane beams or boards on any Belmash machine. The pusher ensures that the workpiece is clamped to the work surface. This facilitates the flow of material, giving you a clean and precise finish. These clamping devices are easy to install using the screws and washers. The opening can be adjusted by means of a handle on the top and the spring clip on the side. In this way, a good supply and pressure force is always assured.
This pusher is suitable for use on the Belmash Universal 2000.
Sturdy, high precision mould made from a 12mm thick HPL panel. The mould is suitable for milling and assembly of worktops with a width of minimum 420mm and maximum 650mm. The angle at which you can assemble the worktops is 45° or 90°. It is also possible to use the round templates in this mould to round off your worktops, or to give them a round angle. The mould is very easy to assemble thanks to the lettered holes and the supplied (3) stoppers in steel.
Supplied as standard with adjustable stop for a perfect position and the possibility to eliminate a false right angle (e.g. between the wall and the panel). To connect the different parts of the worktop, use the cross shapes. Mill out the cross shapes at the bottom and place the shapes exactly opposite each other. Using the special jointing screw from Virutex (sold separately), you then fasten the sheets against each other. (see video)
Designated for use in combination with the FR160P or FRE160P router. Also possible to use with other routers. Note: Always use a Ø30mm guide ring.
Reducer diameter 100-50mm to be used with the Air Flux dust extractors.
Groefzaagblad met vlakke (FZ), widia zaagtanden om groeven te trekken in hardhout, zacht hout, gelamineerde panelen en andere producten op basis van hout. De zaagbladen hebben een asgat van 30mm en zijn ideaal voor gebruik op freesmachines of op zaagtafels.
Dit zaagblad is beschikbaar in verschillende diameters
Gabarit de fraisage à utiliser sur la fraise Virutex FR129VB pour les charnières de porte pour fraiser Argenta 80/80. Ce moule ne convient que pour le modèle 80/80 d'Argenta. Autres modèles disponibles. Charnière non comprise.
Deze zware freeswagen loopt op kogellagers. Te monteren op de Spindle TT800IT freesmachine uit de Revolution reeks.
Lame de scie à 56 dents
Lame de scie à dents de loup pour machines classiques, adaptée à la coupe rapide de différents types de bois, de bois humide ou de forêt. A utiliser sur les machines de chantier ou de construction, mais surtout pour les scies à bois de chauffage. Toute la lame de scie est finie en acier au chrome-vanadium de haute qualité. Made in Germany, profitez de la solide qualité allemande. Il est facile de s'affûter.
Straight router bits from Sistemi Klein ensure smooth and well-finished edges. Suitable for trimming and milling with portable routers. Work more easily using the ball bearing on the shank. The placement of the cutting edges ensures that this router bit can also do machining which requires plunging.
Two flutes provide fast cutting and good chipping ejection. Thanks to the cutting edges in high quality carbide metal, you can use this bit effortlessly on most types of wood.
Le TT70H est un support à rouleau pliable et réglable en hauteur sur roulement à billes.
Ce modèle est un modèle d'entrée de gamme, spécifiquement destiné aux bricoleurs. Ce support à rouleau est vendu par paire.
Les pieds peuvent être repliés à plat, permettant un rangement rapide et pratique.
Cutter head in light metal with knives in high quality tungsten carbide (HW) for jointing. Thanks to the tungsten carbide blades, this grooving cutter cuts effortlessly through solid boards or solid woods. Simply mill one side of the workpiece. Then turn the wood over and mill again. Both parts fit together perfectly and thanks to the larger contact surface you obtain a stronger adhesive bond. To be used on wood of thickness between 26mm and 58mm.
Available with bore 30mm or 50mm. This cutter has been specifically developed for the across the grain joints. For along the grain joints it is recommended to use art. ST-YH152AAM.
Rails for the universal workbench from Kreg Work in an organised and pleasant workplace with the universal workbench from Kreg®. Easily create a workbench, assembly table, tool stand or outfeed table to suit your space, projects and needs. You can personalise your workbench with the different sizes of rails.
This stop is made for the Piher TCP Piston clamp for welding tables. Galvanized and made of carbon steel.
The BOW FeatherDUO featherboard is a stackable version for higher workpieces. Like the FeatherPRO, it features an innovative use of high-density EVA Foam / foam feathers and clamping system that increase control over insertion, dramatically improve recoil and better protect your wood from damage. This compared to the general plastic feaherboards. EVA is a high density, closed cell material with long life that you don't have with the common plastic featherboards. Ideal for table saws, routers, guides
Extendable guide and stopper to use with Virutex' adjustable table MT58K. Ideal for cutting long pieces with great precision and stability. Rapid adjustment of the length by scales and stops graduated in millimetres. Foldable and easy to transport.
Deze elektrische vacuümtafel op kantelbare steun is ontworpen om gladde, niet poreuze werkstukken vast te klemmen. Het vacuüm tussen de basis van de tafel en het werkstuk zorgt voor een stevige klemming en laat na gebruik geen sporen na. Om de tafel vacuüm te maken dient ze aangesloten te zijn op het elektrische vacuümsysteem SVE600 van Virutex (standaard inbegrepen). Dankzij het compacte formaat is deze vacuümtafel zowel geschikt om in het atelier te gebruiken als daarbuiten. De kop van de steun kan 90° kantelen zodat u het werkstuk in een ideale positie kan plaatsen. De steun moet vastgezet worden met klemmen (niet inbegrepen). Omdat u de tafel zowel verticaal als horizontaal kan plaatsen is deze module ideaal voor een brede waaier aan toepassingen. Klem werkstukken vast om te verlijmen, frezen, trimmen, etc...
Met behulp van de standaard geleverd rubber dichtingen verdeelt u de tafel eenvoudig in kleinere secties. Dit is erg handig om bijvoorbeeld kleine stukken vast te zetten. Om grotere werkstukken vast te zetten is de optionele hulpsteun SVE680 beschikbaar. Deze steun is specifiek ontworpen om aan te sluiten op het model SVE670. Standaardlevering met één rubber dichting al geïnstalleerd.
Round-over router bit to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Set profielmessen hoogte 40mm Nr. 0048 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Kit de roues universel à utiliser sous votre machine à bois. Capacité de charge maximale de 600 kg sur une taille maximale de 750x860 mm.
Saw blade met 20 teeth
Multipurpose saw blade with few and FZ flat teeth to quickly cut along and against grain of all natural wood. For use on table saws. No noise saw blades.
Deze zelfklemmende platenklemwagen is de oplossing voor het makkelijk transporteren van deuren, omlijstingen, platen e.d. voor op de bouw en op de werkvloer en heeft een draagvermogen tot 200 kg. Wanneer het materiaal in de Easy Roller wordt geplaatst, klemt deze vanzelf ,door zijn scharnierende werking, het materiaal zelf vast. Wat voorheen met twee mensen gedragen werd, kan nu alleen met behulp van de Easy Roller wat overmatig fysieke belasting op het lichaam voorkomt. De Easy Roller is voorzien van een stevige beschermlaag om beschadiging aan het te transporteren materiaal te voorkomen.
Grâce à sa forme ergonomique, ce poignée vous permet de transporter facilement des panneaux dans différents matériaux. Le poignée a trois fonctions de base : tirer, porter ou soulever. Grâce à sa conception en aluminium, ce poignée est très solide et robuste. La charge maximale est de 70 kg. Convient aux panneaux d'une épaisseur comprise entre 0 mm et 46 mm.
En option, deux pinces sont disponibles pour être placées sur le levier.
Set profielmessen hoogte 40mm Nr. 0014 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Deze boor is verkrijgbaar in twee verschillende lengtes
Set profielmessen hoogte 40mm Nr. 0061 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Works with all machines up to 7.5 KW. Connect several machines so that they can be started up together. Use this simultaneous starter when combining a woodworking machine and dust extractor. The starter motor ensures that your dust extraction system starts up automatically four seconds after you start up your woodworking machine yourself. After stopping your woodworking machine, extraction is also stopped a few seconds later. These extra few seconds of suction ensure that your pipes are always clean.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Weight
0,05 kg
33 kg
5 kg
2,7 kg
5 kg
N/B
1 kg
0,1 kg
20 kg
1 kg
0,05 kg
10 kg
1 kg
2 kg
0,052 kg
2 kg
5 kg
1 kg
0,05 kg
0,05 kg
5 kg
1 kg
4,5 kg
1 kg
0,05 kg
0,05 kg
0,05 kg
0,05 kg
0,05 kg
1 kg
0,05 kg
Dimensions
0,9 cm
395 × 395 × 510 cm
N/B
30 × 26 × 7 cm
N/B
N/B
N/B
N/B
N/B
N/B
N/B
650 × 450 × 110 cm
N/B
N/B
N/B
N/B
N/B
N/B
N/B
0,4 cm
N/B
N/B
N/B
N/B
0,4 cm
N/B
N/B
0,4 cm
N/B
N/B
N/B
Additional information
Gewicht
0,05 kg
Afmetingen
0,9 cm
Gewicht
33 kg
Afmetingen
395 × 395 × 510 cm
Kanteling
45°
Korrel
K80, K100, K120
Voltage
230 V
Werktafel
370 x 370 mm
Uitlaat
50 mm
Rolsnelheid
1400 rpm
Gewicht
5 kg
Gewicht
2,7 kg
Afmetingen
30 × 26 × 7 cm
Max. hoogte werkstuk
63mm
Max. breedte werkstuk
200mm
Gewicht
5 kg
Diameter
50mm, 100mm
Gewicht
1 kg
Zaagblad diameter
125mm, 150mm, 180mm
As diameter
30mm
Tand dikte
3,5mm
Zaagblad dikte
2,5mm
Aantal tanden
12, 18, 24
Gewicht
0,1 kg
Gewicht
20 kg
Lengte
1500mm
Tafel
650x400mm
Gewicht
1 kg
Zaagblad diameter
550mm
As diameter
30mm
Tand dikte
2,8mm
Aantal tanden
56
Gewicht
0,05 kg
Diameter
19mm
Snijlengte
11mm
Lengte
64mm
Schacht
12mm
Snijvlakken
2
Gewicht
10 kg
Afmetingen
650 × 450 × 110 cm
Lengte steun
345 mm
Diameter rol
35 mm
Max. draagkracht
35 kg
Hoogte
610-960 mm
Gewicht
1 kg
Diameter
125mm
As diameter
30mm, 50mm
Snijvlakken
2
Freeshoogte
50mm
Toerental Min-Max
6100-10600
Gewicht
2 kg
Afmetingen
N/B
lengte rails
355 mm, 508 mm, 711 mm, 1100 mm, 1600 mm
Gewicht
0,052 kg
Gewicht
2 kg
Gewicht
5 kg
Verlenging 1
0-1360mm
Verlenging 2
1360-2250mm
Gewicht
1 kg
Vermogen
95W
Afmetingen werkvlak
150x150mm
Vacuümdruk
750mbar
Gewicht
0,05 kg
Diameter
24,7mm
Snijlengte
12mm
Lengte
51mm
Radius
R6
Schacht
8mm
Snijvlakken
2
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
5 kg
Gewicht
1 kg
Zaagblad diameter
250mm
As diameter
30mm
Tand dikte
3,2mm
Zaagblad dikte
2,2mm
Aantal tanden
20
Meeneemgaten
PH02
Gewicht
4,5 kg
Draagvermogen
200 kg
Max. klemdikte
120 mm
Materiaal
staal 2,5 mm dikte, pneumatische wielen
Gewicht
1 kg
Max. Draagkracht
70kg
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
0,05 kg
Diameter
10mm
Snijlengte
19mm, 25mm
Lengte
51mm, 57mm
Snijvlakken
2+1
Gewicht
0,05 kg
Diameter
22mm
Lengte
90mm, 120mm
Schacht
10x100mm, 10x60mm
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
0,05 kg
Diameter
22mm
Snijlengte
19mm
Lengte
51mm
Snijvlakken
2+1
Gewicht
1 kg
Gewicht
0,05 kg
Diameter
12,7mm
Snijlengte
19mm
Lengte
51mm
Snijvlakken
2
Meld je aan voor onze nieuwsbrief
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Vergelijken
We gebruiken cookies om ervoor te zorgen dat onze website zo soepel mogelijk draait. Als je doorgaat met het gebruiken van de website, gaan we er vanuit dat je ermee instemt.OkPrivacy policy