Beweegbare bek voor gietijzeren lijmklem Maxipress F, systeem met volledig beschermde schroefdraad
Set profielmessen hoogte 40mm Nr. 0005 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Soldes
Idéal pour réaffûter les outils courbes, les gouges, les outils de coupe et de tournage du bois. Surface diamantée convexe et concave dans un seul outil de meulage. Réaffûtage des outils avec un rayon de min. 1,6 à max. 25 mm. Comprend un support antidérapant pour une utilisation plus facile. Pas besoin d'huile - à moudre à sec ou avec de l'eau.
De handige 123-blokken van Bow Products, gemaakt van het exclusieve EVA-materiaalmix, zijn een waardevolle aanvulling op elke werkplaats. Het unieke EVA-materiaal is extreem sterk en duurzaam, en de blokken zijn afgewerkt in de herkenbare BOW groene kleur, zodat je ze altijd gemakkelijk kunt vinden.
In tegenstelling tot hardere materialen zoals hout, is EVA eenvoudig te snijden en laat het nauwelijks merkbare sporen achter bij het gebruik van een zaag of boor. Bovendien blijft EVA niet plakken aan hete plotters.
De EVA-blokken behouden hun vorm en stijfheid na verloop van tijd en bij herhaaldelijk gebruik. Omdat EVA een technologie met gesloten cellen is, zal het geen materiaal afgeven aan andere oppervlakken of snijplotters. Je hoeft je dus geen zorgen te maken over eventuele schade aan materialen of afgewerkte oppervlakken.
Deze veelzijdige blokken zijn uitstekend geschikt voor talloze toepassingen. Bovendien zijn ze verkrijgbaar in drie verschillende blokafmetingen, zodat je kunt kiezen op basis van de diepte of hoogtevereisten van je projecten.
These galvanized spring steel holders mount to the wall in seconds and are a perfect home for tools or accessories with a diameter of 10 cm, such as the new Air Flux accessories. Fitting connectors, flexible extraction hose and other tools with a Ø 100 mm fit perfectly here.
Beweegbare bek voor op de PIHER Mod. POT klemmen.
Volledig gemaakt uit gesmeed staal.
SALES
With this laminate cutter, you can easily cut laminate to the right length.
Clean cut in 2 simple steps:
Place the workpiece under the blade and press it against the stop.
Press the lever down in one movement.
Always use level carrier as support
This concrete grinder was specially designed for grinding away concrete parts, sanding down old concrete layers or removing transitions between formwork and concrete runners. Optimal preparation for further coatings. The concrete sander has a metal housing and dust extraction. This extraction prevents dust nuisance, which in turn reduces the wear of the disc and keeps the pores of the concrete open. Equipped with a diamond head grain 24, a reliable 1200W motor. A blocking system has also been fitted so that the diamond heads can be changed safely. Vibration-damping, ergonomic handle (rotates 90°) for optimal handling and control of the device. An airflow cooling system reduces noise pollution to an absolute minimum. Max speed 9,500.
Cette meuleuse à béton a été spécialement conçue pour le meulage des pièces en béton, le ponçage des anciennes couches de béton ou l'élimination des transitions entre les coffrages et les coulées de béton. Préparation optimale pour les revêtements ultérieurs. La ponceuse à béton est dotée d'un boîtier métallique et d'un système d'aspiration des poussières. Cette extraction évite les nuisances dues à la poussière, ce qui réduit l'usure des disques et maintient les pores du béton ouverts. Équipé d'une tête diamantée grain 24 et d'un moteur fiable de 2100W. En outre, un système de blocage a été prévu pour que les têtes de diamant puissent être changées en toute sécurité. Poignée ergonomique amortissant les vibrations (pivotant à 90°) pour une manipulation et un contrôle optimaux de l'appareil. Un système de refroidissement par flux d'air réduit la pollution sonore à un minimum absolu. Vitesse maximale de 6 600.
Promotiepakket van paneelzaag Sliding Comfort TT1300 inclusief afzuiginstallatie, afzuigslang, klembanden en set van drie zaagbladen. Deze compacte platenzaag uit onze comfortline met krachtige 230V inductiemotor (3PK) is een zeer populaire machine in vele werkplaatsen. Dit model paneelzaag is voorzien van een zware, gietijzeren werktafel die een erg goede vlakheid biedt. Het hoogwaardig, prismatisch slidingsysteem heeft een totale zaaglengte van 1300mm.
Saw blade with 24 teeth
Multipurpose saw blade with WZ alternate top bevel teeth for quickly cutting along and across grain of all natural woods, wooden boarding materials or one sided veneer and plastic coated materials. For use on table saws. No noise saw blades.
Insulating silicone seal for windows & doors in brown colour. Excellent resistance at temperatures between -60 and 200°C. With this seal you will enjoy both good temperature and sound insulation. Essential for new constructions and easy to mill into existing constructions. Use the Virutex slotting machine RA17VG with the two-sided straight bit.
Available in diameter 6mm or 8mm.
Robust, all-steel tilting log saw for quick, easy and safe cutting of firewood. This tilting log saw for firewood is fully compliant with the CEN safety standards for this type of machinery. The cover prevents you from getting near the saw blade while working, greatly reducing the risk of accidents. This tilting log saw is equipped with a saw blade in German chrome with diameter Ø500mm and an induction motor of 3.5 HP. Extremely suitable for cutting branches or tree trunks with a maximum thickness of 200mm. Ergonomic and easy to operate, with automatic return unit. Experience all the advantages of solid Austrian quality.
Fully assembled on delivery and ready to use.
La nouvelle brosseuse à structure DUROTEC est plus puissante et plus compacte et peut fonctionner encore plus lentement pour une meilleure finition. L'engrenage à double réduction vous permet d'exercer une pression sans que la machine ne ralentisse, pour une force de correction supplémentaire. La conception ergonomique et le poids léger garantissent que cette machine est parfaitement manipulable pour brosser, satiner ou structurer votre pièce de travail. Durotec est une machine extrêmement compacte avec une poignée en D ergonomique et pratique.
Engrenage à double réduction
Vitesse réglable 1200-3900 rpm
Moteur Marathon 800 W, couple constant
Poignée ergonomique
Fourni en standard avec la brosse en feutre DUROGRIND K80. De nombreux brosses disponibles en option pour le travail du bois et du métal.
Set profielmessen hoogte 40mm Nr. 0086 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
The adjustable roller supports workpieces up to 40 kg and can be used both horizontally and vertically. Chrome plated roller with ball bearings on a Heavy-Duty base. The base is equipped with a clamp that can be placed on any surface up to 6.5 cm thick. Height adjustment from 8cm - 40cm in relation to the clamp. The roller support can be quickly disassembled for storage when not in use.
Gabarit de fraisage à utiliser sur la fraise Virutex FR129VB pour les charnières de porte pour fraiser Argenta Invisible Neo S-5. Ce moule ne convient que pour le modèle Invisible Neo S-5 d’Argenta. Autres modèles disponibles. Charnière non comprise..
The vacuum table SFV50 is suitable for a solid and quick fixation of the panel. Using the suction cups, this support is ideal for all smooth, non-porous materials. Two clamps are included as standard to fix the support. The table is an efficient and user-friendly way to hold the panel and work comfortably at the edges. For larger workpieces it is recommended to use multiple supports. The support can be placed both horizontally and vertically. Also available with a single suction cup as SFV150.
Longeur de cette mèche est 180mm
Mèches pour mortaiser avec brise - copeaux, disponible à coupe gauche ou droite. Les mèches sont approprié pour faire des travaux de mortaisage dans le plupart de types de bois. Les mèches ont deux faces à couper en acier 18% HSS.
MODÈLE D'EXPOSITION - NOUVEAU
Le rabot de menuiserie CPL 200 est fabriqué en aluminium et en acier, et dispose d'un arbre de rabotage tout en acier avec deux couteaux de rabotage.
Le moteur puissant, le front pointu et l'évacuation des copeaux à l'avant assurent que la machine reste parfaitement utilisable avec du bois sec et humide, sans que la tranchée ne soit encombrée par la grande quantité de copeaux. Ceci permet le rabotage de madriers longs en une seule fois.
La profondeur du rabot est facilement réglable par un bouton rotatif de 0 à 3 mm, ce qui garantit que le rabot continue à fonctionner de manière fluide et précise même après une utilisation prolongée.
Le CPL 200 est le partenaire idéal de tout charpentier sur un chantier de construction.
Quarter-circle concave radius cutter to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Utilisez ce reglet de toupilleur pour toujours régler correctement la profondeur et la hauteur de votre fraisage ou de votre coupe de scie par rapport à votre guide. Graduation au mm.
Avec une meule humide de 254 mm sur 50 mm à grain 220 et une meule humide en cuir de Ø 200 mm, vous avez tout ce qu'il faut pour redonner vie aux vieux outils et couteaux émoussés. Le moteur à usage intensif fait tourner les roues à 115 tr/min pour une précision maximale pendant le travail. Une fois que le bord est bien aiguisé, polissez et finissez la surface de la roue en cuir. Donnez des couteaux émoussés, des ciseaux à bois, des outils de coupe, des ciseaux, des tournevis, des outils de tournage, ... une seconde vie.
Inversez le sens de rotation en appuyant sur un bouton pour répondre aux besoins de toute tâche. Le support universel peut être réglé à la fois horizontalement et verticalement, ce qui permet d'utiliser des gabarits et autres accessoires avec la machine.
Connector de diamètre 100mm pour connecter plusieurs pièces d'accessoires Air Flux.. A utiliser en combinaison avec les systèmes d'aspiration d'Air Flux. Filetage sur un côté.
Porte outils en métal léger avec lames réversibles en carbure de haute qualité (HW) pour créer de beaux profils plate-bande sur vos meubles ou panneaux de porte. La longueur maximale de cette fraise à bande plate est de 54mm. Le porte outils est livrée dans un boîtier en plastique robuste, avec une clé permettant de remplacer facilement les couteaux. Pour tirer encore plus de profit de votre porte outils, six couteaux profilés sont disponibles au total. Le couteau profilé A est monté en standard sur le porte outils. Les autres couteaux, de type B, C, D et E, sont disponibles séparément. Grâce aux lames en carbure de tungstène, cette fraise profilée coupe sans effort les planches ou les bois massifs. Peut également être utilisé sur du MDF.
Disponible avec un alésage de 30 mm ou 50 mm.
Promo set of the Durotec brush machine for metalworking. The machine comes with numerous brushes mainly aimed at metalworking.
Purchasing the Durotec machine in this promo set will save you € 207.25.
Watch the VIDEO
Transparante buis met handgreep en afsluitschuif om te gebruiken met de stofafzuigingen van Air Flux. Gebruik de Clean-Up kit om uw atelier proper te houden en stof- of houtresten na het werken op te zuigen.
Showroommodel
The Itamac WL-508DC is a very stable, with vario-inverter speed control, left and right turning wood lathe with a turning diameter of 320 mm and 508 mm between the points. The speed can be regulated steplessly in 3 ranges between 250 and 3850 rpm. (250-750 / 550-1650 / 1300-3850 rpm). The vario-inverter can maintain a constant torque at any speed, so even at low rpm it still delivers very powerful torque. The motor is a low-noise DC motor of 1000 Watts.
Separate large wood chips from your system before they reach your dust collector. A pair of plastic elbow and coupling components serve as input and output points when you install them at either end of a barrel, bin, or other receptacle you plan to use to capture large wood chips. This system prevents wear and tear on your dust collector and you don't have to empty it as often. The two coupling components fit a standard 100mm hose.
This set comes with a template to make the correct holes in your container for mounting the two connection points.
Need inspiration? View the construction plan at downloads and easily create your own collection container.
Content
Beweegbare bek voor klem Maxipress F
Set profielmessen hoogte 40mm Nr. 0005 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Idéal pour réaffûter les outils courbes, les gouges, les outils de coupe et de tournage du bois. Surface diamantée convexe et concave dans un seul outil de meulage. Réaffûtage des outils avec un rayon de min. 1,6 à max. 25 mm. Comprend un support antidérapant pour une utilisation plus facile. Pas besoin d'huile - à moudre à sec ou avec de l'eau.
De handige 123-blokken van Bow Products, gemaakt van het exclusieve EVA-materiaalmix, zijn een waardevolle aanvulling op elke werkplaats. Het unieke EVA-materiaal is extreem sterk en duurzaam, en de blokken zijn afgewerkt in de herkenbare BOW groene kleur, zodat je ze altijd gemakkelijk kunt vinden.
In tegenstelling tot hardere materialen zoals hout, is EVA eenvoudig te snijden en laat het nauwelijks merkbare sporen achter bij het gebruik van een zaag of boor. Bovendien blijft EVA niet plakken aan hete plotters.
De EVA-blokken behouden hun vorm en stijfheid na verloop van tijd en bij herhaaldelijk gebruik. Omdat EVA een technologie met gesloten cellen is, zal het geen materiaal afgeven aan andere oppervlakken of snijplotters. Je hoeft je dus geen zorgen te maken over eventuele schade aan materialen of afgewerkte oppervlakken.
Deze veelzijdige blokken zijn uitstekend geschikt voor talloze toepassingen. Bovendien zijn ze verkrijgbaar in drie verschillende blokafmetingen, zodat je kunt kiezen op basis van de diepte of hoogtevereisten van je projecten.
These galvanized spring steel holders mount to the wall in seconds and are a perfect home for tools or accessories with a diameter of 10 cm, such as the new Air Flux accessories. Fitting connectors, flexible extraction hose and other tools with a Ø 100 mm fit perfectly here.
Beweegbare bek voor op de PIHER Mod. POT klemmen.
Volledig gemaakt uit gesmeed staal.
SALES
With this laminate cutter, you can easily cut laminate to the right length.
Clean cut in 2 simple steps:
Place the workpiece under the blade and press it against the stop.
Press the lever down in one movement.
Always use level carrier as support
This concrete grinder was specially designed for grinding away concrete parts, sanding down old concrete layers or removing transitions between formwork and concrete runners. Optimal preparation for further coatings. The concrete sander has a metal housing and dust extraction. This extraction prevents dust nuisance, which in turn reduces the wear of the disc and keeps the pores of the concrete open. Equipped with a diamond head grain 24, a reliable 1200W motor. A blocking system has also been fitted so that the diamond heads can be changed safely. Vibration-damping, ergonomic handle (rotates 90°) for optimal handling and control of the device. An airflow cooling system reduces noise pollution to an absolute minimum. Max speed 9,500.
Cette meuleuse à béton a été spécialement conçue pour le meulage des pièces en béton, le ponçage des anciennes couches de béton ou l'élimination des transitions entre les coffrages et les coulées de béton. Préparation optimale pour les revêtements ultérieurs. La ponceuse à béton est dotée d'un boîtier métallique et d'un système d'aspiration des poussières. Cette extraction évite les nuisances dues à la poussière, ce qui réduit l'usure des disques et maintient les pores du béton ouverts. Équipé d'une tête diamantée grain 24 et d'un moteur fiable de 2100W. En outre, un système de blocage a été prévu pour que les têtes de diamant puissent être changées en toute sécurité. Poignée ergonomique amortissant les vibrations (pivotant à 90°) pour une manipulation et un contrôle optimaux de l'appareil. Un système de refroidissement par flux d'air réduit la pollution sonore à un minimum absolu. Vitesse maximale de 6 600.
Promotiepakket van paneelzaag Sliding Comfort TT1300 inclusief afzuiginstallatie, afzuigslang, klembanden en set van drie zaagbladen. Deze compacte platenzaag uit onze comfortline met krachtige 230V inductiemotor (3PK) is een zeer populaire machine in vele werkplaatsen. Dit model paneelzaag is voorzien van een zware, gietijzeren werktafel die een erg goede vlakheid biedt. Het hoogwaardig, prismatisch slidingsysteem heeft een totale zaaglengte van 1300mm.
Saw blade with 24 teeth
Multipurpose saw blade with WZ alternate top bevel teeth for quickly cutting along and across grain of all natural woods, wooden boarding materials or one sided veneer and plastic coated materials. For use on table saws. No noise saw blade with anti-kickback design.
Insulating silicone seal for windows & doors in brown colour. Excellent resistance at temperatures between -60 and 200°C. With this seal you will enjoy both good temperature and sound insulation. Essential for new constructions and easy to mill into existing constructions. Use the Virutex slotting machine RA17VG with the two-sided straight bit.
Available in diameter 6mm or 8mm.
Robust, all-steel tilting log saw for quick, easy and safe cutting of firewood. This tilting log saw for firewood is fully compliant with the CEN safety standards for this type of machinery. Includes zero voltage protection on the switch for improved safety in the event of voltage loss. Brennholz has been synonymous with reliability and safety for years. Experience all the advantages of solid Austrian quality thanks to this firewood saw. The cover prevents you from getting near the saw blade while working, greatly reducing the risk of accidents. This tilting saw is equipped with a saw blade in German chrome with diameter Ø550mm. The direct-drive induction motor delivers 3.5 HP. Use at least power cable with thickness 2.5m² to avoid damaging the motor. Extremely suitable for cutting branches or tree trunks with a maximum thickness of 200mm.
The tilting saw is equipped with an automatic return unit using a spring. The saw blade is effortless to operate and cuts quickly through the wood. Saw large quantities of wood in one go without any problems and ergonomically. An extension support is available as an option for sawing larger pieces. With the help of the yardstick you can then cut to the same size again and again. Equipped with a sturdy base with two wheels and a pull rod which makes it easy to move the machine. Easy to move, both indoors and outdoors and on uneven surfaces. Fully assembled on delivery and ready to use.
Machine à brosser les structures pour le bois, le métal et la pierre.
La brosseuse texturée DUROTEC est un maître du brossage, du satinage, du ponçage et du polissage. Les brosses enlèvent principalement le bois plus tendre des cernes de croissance les plus récentes et laissent le bois plus dur des cernes de croissance plus anciennes intact. Le bois est ainsi vieilli artificiellement, car le traitement mécanique accélère considérablement l'effet de vieillissement naturel. Les surfaces en bois brossé sont utilisées, entre autres, pour la fabrication de meubles rustiques, pour l'ameublement de cafés et restaurants rustiques (revêtements de murs et de plafonds) ou pour des poutres.
La machine à brosses de Durotec est la machine à brosses idéale pour le dérouillage des surfaces métalliques, l'élimination de l'oxydation, le polissage des surfaces métalliques, la finition de l'acier, de l'acier inoxydable et des métaux non ferreux, etc.
La nouvelle machine à brosser est plus puissante et compacte et peut fonctionner encore plus lentement pour une meilleure finition. La double transmission garantit que vous pouvez appliquer une pression sans ralentir la machine pour une puissance de correction supplémentaire. La conception ergonomique et le faible poids garantissent que cette machine est parfaite à manipuler pour le brossage ou la structuration de votre pièce. Equipé d'une poignée robuste réglable en hauteur.
Set profielmessen hoogte 40mm Nr. 0086 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
The adjustable roller supports workpieces up to 40 kg and can be used both horizontally and vertically. Chrome plated roller with ball bearings on a Heavy-Duty base. The base is equipped with a clamp that can be placed on any surface up to 6.5 cm thick. Height adjustment from 8cm - 40cm in relation to the clamp. The roller support can be quickly disassembled for storage when not in use.
Gabarit de fraisage à utiliser sur la fraise Virutex FR129VB pour les charnières de porte pour fraiser Argenta Invisible Neo S-5. Ce moule ne convient que pour le modèle Invisible Neo S-5 d’Argenta. Autres modèles disponibles. Charnière non comprise.
The vacuum table SFV50 is suitable for a solid and quick fixation of the panel. Using the suction cups, this support is ideal for all smooth, non-porous materials. Two clamps are included as standard to fix the support. The table is an efficient and user-friendly way to hold the panel and work comfortably at the edges. For larger workpieces it is recommended to use multiple supports. The support can be placed both horizontally and vertically. Also available with a single suction cup as SFV150.
Longeur de cette mèche est 180mm
Mèches pour mortaiser avec brise - copeaux, disponible à coupe gauche ou droite. Les mèches sont approprié pour faire des travaux de mortaisage dans le plupart de types de bois. Les mèches ont deux faces à couper en acier 18% HSS.
Le rabot de menuiserie CPL 200 est fabriqué en aluminium et en acier, et dispose d'un arbre de rabotage tout en acier avec deux couteaux de rabotage.
Le moteur puissant, le front pointu et l'évacuation des copeaux à l'avant assurent que la machine reste parfaitement utilisable avec du bois sec et humide, sans que la tranchée ne soit encombrée par la grande quantité de copeaux. Ceci permet le rabotage de madriers longs en une seule fois.
La profondeur du rabot est facilement réglable par un bouton rotatif de 0 à 3 mm, ce qui garantit que le rabot continue à fonctionner de manière fluide et précise même après une utilisation prolongée.
Le CPL 200 est le partenaire idéal de tout charpentier sur un chantier de construction.
Round-over router bit to easily and quickly round corners. Increasing the working depth, you will obtain the classical "quarter-round" typical of dining table edges. Perfect finish of your project on different wood types thanks to the HW tungsten cutting edges.
Equipped with a ball bearing for easier work. When using a bit with a large radius, it is advisable to carry out the machining in several steps.
Utilisez ce reglet de toupilleur pour toujours régler correctement la profondeur et la hauteur de votre fraisage ou de votre coupe de scie par rapport à votre guide. Graduation au mm.
Avec une meule humide de 254 mm sur 50 mm à grain 220 et une meule humide en cuir de Ø 200 mm, vous avez tout ce qu'il faut pour redonner vie aux vieux outils et couteaux émoussés. Le moteur à usage intensif fait tourner les roues à 115 tr/min pour une précision maximale pendant le travail. Une fois que le bord est bien aiguisé, polissez et finissez la surface de la roue en cuir. Donnez des couteaux émoussés, des ciseaux à bois, des outils de coupe, des ciseaux, des tournevis, des outils de tournage, ... une seconde vie.
Inversez le sens de rotation en appuyant sur un bouton pour répondre aux besoins de toute tâche. Le support universel peut être réglé à la fois horizontalement et verticalement, ce qui permet d'utiliser des gabarits et autres accessoires avec la machine.
La meuleuse humide et sèche TT250/50 comprend également un guide d'angle, un réservoir d'eau réglable en hauteur et un gabarit pour les lames de rabot et les couteaux. La poignée de transport intégrée rend le transport plus facile que jamais, tandis que les supports de fixation combinés à la base solide empêchent de marcher et de vaciller pendant l'utilisation.
Connector de diamètre 100mm pour connecter plusieurs pièces d'accessoires Air Flux.. A utiliser en combinaison avec les systèmes d'aspiration d'Air Flux. Filetage sur un côté.
Porte outils en métal léger avec lames réversibles en carbure de haute qualité (HW) pour créer de beaux profils plate-bande sur vos meubles ou panneaux de porte. La longueur maximale de cette fraise à bande plate est de 54mm. Le porte outils est livrée dans un boîtier en plastique robuste, avec une clé permettant de remplacer facilement les couteaux. Pour tirer encore plus de profit de votre porte outils, six couteaux profilés sont disponibles au total. Le couteau profilé A est monté en standard sur le porte outils. Les autres couteaux, de type B, C, D et E, sont disponibles séparément. Grâce aux lames en carbure de tungstène, cette fraise profilée coupe sans effort les planches ou les bois massifs. Peut également être utilisé sur du MDF.
Disponible avec un alésage de 30 mm ou 50 mm.
Promo set of the Durotec brush machine for metalworking.
Rust removal from metal surfaces
Finishing steel, stainless and nonferrous metals
Removal of Oxidation
Polishing of metal surfaces
...
Transparante buis met handgreep en afsluitschuif om te gebruiken met de stofafzuigingen van Air Flux. Gebruik de Clean-Up kit om uw atelier proper te houden en stof- of houtresten na het werken op te zuigen.
The Itamac WL-508DC is a very stable, with vario-inverter speed control, left and right turning wood lathe with a turning diameter of 320 mm and 508 mm between the points. The speed can be regulated steplessly in 3 ranges between 250 and 3850 rpm. (250-750 / 550-1650 / 1300-3850 rpm). The vario-inverter can maintain a constant torque at any speed, so even at low rpm it still delivers very powerful torque. The motor is a low-noise DC motor of 1000 Watts. With this compact wood lathe, attention has been paid to turning as quietly and vibration-free as possible. Very user-friendly operation with a rotary knob for stepless speed control and digital display of speed and direction of rotation.
The three-stage wide polybelt pulleys can be changed very quickly and easily, and thus the speed range can be adjusted easily and quickly.This lathe has a wide and solid bed and therefore also maximum stability during turning! The 200 mm wide support slides easily up and down the bed and has a nice 45° bevelled edge.
Separate large wood chips from your system before they reach your dust collector. A pair of plastic elbow and coupling components serve as input and output points when you install them at either end of a barrel, bin, or other receptacle you plan to use to capture large wood chips. This system prevents wear and tear on your dust collector and you don't have to empty it as often. The two coupling components fit a standard 100mm hose.
This set comes with a template to make the correct holes in your container for mounting the two connection points.
Need inspiration? View the construction plan at downloads and easily create your own collection container.
Weight
0,93 kg
0,05 kg
2 kg
0,3 kg
0,2 kg
1,2 kg
2 kg
2,9 kg
3 kg
500 kg
1 kg
2 kg
88 kg
3 kg
0,05 kg
2,70 kg
0,1 kg
2 kg
0,05 kg
14 kg
0,05 kg
0,5 kg
10 kg
0,5 kg
1 kg
6 kg
1 kg
53 kg
1 kg
Dimensions
N/B
0,4 cm
N/B
15 × 15 cm
N/B
N/B
N/B
N/B
N/B
N/B
N/B
N/B
70 cm
38 cm
0,4 cm
45 cm
N/B
N/B
N/B
N/B
N/B
50 × 6,5 cm
N/B
N/B
N/B
N/B
N/B
1020 × 305 × 470 cm
N/B
Additional information
Gewicht
0,93 kg
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
2 kg
Gewicht
0,3 kg
Afmetingen
15 × 15 cm
Gewicht
0,2 kg
Diameter
100mm
Gewicht
1,2 kg
Gewicht
2 kg
Gewicht
2,9 kg
Vermogen
1200W
Toerental
9500 rpm
Gewicht
3 kg
Gewicht
500 kg
Gewicht
1 kg
Zaagblad diameter
250mm
As diameter
30mm
Tand dikte
3,2mm
Zaagblad dikte
2,2mm
Aantal tanden
24
Meeneemgaten
PH02
Gewicht
2 kg
Diameter
6mm, 8mm
Gewicht
88 kg
Afmetingen
70 cm
Voltage
230 V
Motor
3.5 PK
Zaagblad diameter
550mm
Max. Snijdiameter
200mm
Gewicht
3 kg
Afmetingen
38 cm
Voltage
230 V
Vermogen
800W
Toerental Min-Max
1200-3900
Borstel
110x115x19mm
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
2,70 kg
Afmetingen
45 cm
Laad capaciteit
40kg
Gewicht
0,1 kg
Gewicht
2 kg
Gewicht
0,05 kg
Diameter
22mm
Lengte
180mm
Schacht
16x50mm
Draairichting
Rechts, Links
Gewicht
14 kg
Vermogen
1500W
Voltage
230 V
Schaafbreedte
200 mm
Schaafdiepte
0-3 mm
Toerental schaafas
12.400
Lengte
490mm
Gewicht
0,05 kg
Diameter
32,7mm
Snijlengte
16mm
Lengte
65mm
Radius
R10
Schacht
12mm
Snijvlakken
2
Gewicht
0,5 kg
Afmetingen
50 × 6,5 cm
Gewicht
10 kg
Gewicht
0,5 kg
Diameter
100mm
Gewicht
1 kg
Diameter
180mm
As diameter
30mm, 50mm
Snijvlakken
2
Freeshoogte
23mm
Snijlengte
54mm
Toerental Min-Max
4000-6500
Gewicht
6 kg
Vermogen
800W
Toerental Min-Max
1200-3900
Gewicht
1 kg
Gewicht
53 kg
Afmetingen
1020 × 305 × 470 cm
Centerafstand
508 mm
Voltage
230 V
Schroefdraad
M33
Morseconus van losse kop
MT 2
Draaidiameter over het bed
320 mm
Verplaatsing as van losse kop
63 mm
Toerental Min-Max
250 – 3850
Draaibare kop
Nee
Gewicht
1 kg
Diameter
100mm
Meld je aan voor onze nieuwsbrief
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Vergelijken
We gebruiken cookies om ervoor te zorgen dat onze website zo soepel mogelijk draait. Als je doorgaat met het gebruiken van de website, gaan we er vanuit dat je ermee instemt.OkPrivacy policy