Schuurdisc voor schuurmachine TT1220 - diameter 255 mm
La fraise à rayon convexe de Sistemi Klein est parfaite pour usiner les bords des armoires, des portes et des tiroirs ou des colonnes. À l'aide de cette fraise, créez des rainures de quart de rond sur la plupart des types de bois.
Equipé d'un roulement à billes pour faciliter le travail. Si vous utilisez une fraise de grand diamètre, il est conseillé d'effectuer l'usinage en plusieurs étapes.
The Kreg KMA4600 Straight Edge Guide Extension is a 610mm (24”) extension for the Kreg Straight Edge Guide fence. With this extension, in combination with the Kreg Straight Edge Guide, you can saw neat and precise sheet material up to 1828 mm (72”)!
Whether you want to get started with your circular saw, jigsaw or edge mill, with the Kreg Straight Edge Guide fence and extension you create a precise and accurate result. This Kreg stop ruler extension is supplied with connectors to connect the extension to the ruler. The Kreg KMA4600 is made of anodized aluminum. This means that the extension lasts a long time, even with intensive use.
The scroll saw TT406E is a compact saw with parallel action and different speeds. Use this scroll saw for a wide range of applications in fine detail sawing. Suitable for solid wood as well as for sheet metal or even non-ferrous metals. Indicated to use the higher speed of the machine for soft wood. The lower speed is perfect for solid wood, harder plastics and soft metals. The worktop can be mitered and has a translucent middle surface. The saw is equipped with an air blower to blow away the dust while working. It is possible to mount saw ribbons both with and without a pin on this machine.
Lame de scie pour rainues avec denture plate (FZ) widia pour faire des rainures dans des bois durs, tendres, exotiques et des panneaux avec revêtement en plastique. Les lames de scie ont un alésage de 30mm et sont idéal à utiliser sur des toupies ou des scies à table.
Lame de scie disponible en differents diamètres
This spacer ring is designed for the use of the narrow nylon brush on the Durotec structuring/brushing machine. Narrow brushes are the ideal solution for hard-to-reach areas.
Works with all machines up to 7.5 KW. Connect several machines so that they can be started up together. Use this simultaneous starter when combining a woodworking machine and dust extractor. The starter motor ensures that your dust extraction system starts up automatically four seconds after you start up your woodworking machine yourself. After stopping your woodworking machine, extraction is also stopped a few seconds later. These extra few seconds of suction ensure that your pipes are always clean.
Wheel kit to mount on different machines of our Comfort Line range. Use this wheel kit to easily move your band saw, panel saw, flat bench or toupee through the workshop. With detachable lever for easy handling.
Adjustable cutterhead with reversible knives in high quality carbide metal (HW) for making thin precision grooves. Adjustable in height between 8mm and 15mm by means of spacer rings. Spacer rings included as standard. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards.
Available with bore 30mm or 50mm.
This adjustable bevel cutter head with high-quality tungsten carbide cutting edges gives you tremendous flexibility when making chamfers. The knives are adjustable on both sides between 0° and 90° in increments of 7,5°. Use the cutter head both for chamfering wood and board material. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards.
Mini-ponceuse rotorbitale légère et puissante pour des travaux de ponçage de haute qualité. Cette machine combine un double mouvement, le patin de ponçage est à la fois vibrante et rotorbital. Grâce au double mouvement lors du ponçage, vous obtenez toujours une surface lisse sans rayer votre pièce. La conception ergonomique assure une prise en main parfaite et un travail confortable. Toutes les commandes sont facilement accessibles pendant le travail. Equipé d'un extracteur de poussière intégré et d'un sac à poussière. Avec contrôle électronique de la vitesse et système de freinage pour le patin de ponçage. Standard livré avec un patin de ponçage avec velcro.
Prolongez considérablement la durée de vie de votre plaqueuse de chants portable ou stationnaire. Le Cantspray Virutex est un spray antiadhésif sans silicone. Convient pour traiter toutes les pièces mobiles de votre plaqueuse de chants et empêcher l'accumulation de colle. Il est recommandé d'appliquer le Virutex Cantspray avant et après l'utilisation de votre machine pour un résultat optimal.
Content
Schuurdisc voor schuurmachine TT1220.
Diameter 255 mm
Verkrijgbaar in korrel 60 - 80 - 100 - 120 - 150 - 220
Universele schuurdisc met kwaliteitskorrel voor het schuren van multiplex, kunststof, zachthout en zelfs hardhout.
La fraise à rayon convexe de Sistemi Klein est parfaite pour usiner les bords des armoires, des portes et des tiroirs ou des colonnes. À l'aide de cette fraise, créez des rainures de quart de rond sur la plupart des types de bois.
Equipé d'un roulement à billes pour faciliter le travail. Si vous utilisez une fraise de grand diamètre, il est conseillé d'effectuer l'usinage en plusieurs étapes.
The Kreg KMA4600 Straight Edge Guide Extension is a 610mm (24”) extension for the Kreg Straight Edge Guide fence. With this extension, in combination with the Kreg Straight Edge Guide, you can saw neat and precise sheet material up to 1828 mm (72”)!
Whether you want to get started with your circular saw, jigsaw or edge mill, with the Kreg Straight Edge Guide fence and extension you create a precise and accurate result. This Kreg stop ruler extension is supplied with connectors to connect the extension to the ruler. The Kreg KMA4600 is made of anodized aluminum. This means that the extension lasts a long time, even with intensive use.
The scroll saw TT406E is a compact saw with parallel action and different speeds. Use this scroll saw for a wide range of applications in fine detail sawing. Suitable for solid wood as well as for sheet metal or even non-ferrous metals. Indicated to use the higher speed of the machine for soft wood. The lower speed is perfect for solid wood, harder plastics and soft metals. The worktop can be mitered and has a translucent middle surface. The saw is equipped with an air blower to blow away the dust while working. It is possible to mount saw ribbons both with and without a pin on this machine.
Lame de scie pour rainues avec denture plate (FZ) widia pour faire des rainures dans des bois durs, tendres, exotiques et des panneaux avec revêtement en plastique. Les lames de scie ont un alésage de 30mm et sont idéal à utiliser sur des toupies ou des scies à table.
Lame de scie disponible en differents diamètres
This spacer ring is designed for the use of the narrow nylon brush on the Durotec structuring/brushing machine. Narrow brushes are the ideal solution for hard-to-reach areas.
Works with all machines up to 7.5 KW. Connect several machines so that they can be started up together. Use this simultaneous starter when combining a woodworking machine and dust extractor. The starter motor ensures that your dust extraction system starts up automatically four seconds after you start up your woodworking machine yourself. After stopping your woodworking machine, extraction is also stopped a few seconds later. These extra few seconds of suction ensure that your pipes are always clean.
Wheel kit to mount on different machines of our Comfort Line range. Use this wheel kit to easily move your band saw, panel saw, flat bench or toupee through the workshop. With detachable lever for easy handling.
Adjustable cutterhead with reversible knives in high quality carbide metal (HW) for making thin precision grooves. Adjustable in height between 8mm and 15mm by means of spacer rings. Spacer rings included as standard. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards.
Available with bore 30mm or 50mm.
This adjustable bevel cutter head with high-quality tungsten carbide cutting edges gives you tremendous flexibility when making chamfers. The knives are adjustable on both sides between 0° and 90° in increments of 7,5°. Use the cutter head both for chamfering wood and board material. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards.
Mini-ponceuse rotorbitale légère et puissante pour des travaux de ponçage de haute qualité. Cette machine combine un double mouvement, le patin de ponçage est à la fois vibrante et rotorbital. Grâce au double mouvement lors du ponçage, vous obtenez toujours une surface lisse sans rayer votre pièce. La conception ergonomique assure une prise en main parfaite et un travail confortable. Toutes les commandes sont facilement accessibles pendant le travail. Equipé d'un extracteur de poussière intégré et d'un sac à poussière. Avec contrôle électronique de la vitesse et système de freinage pour le patin de ponçage. Standard livré avec un patin de ponçage avec velcro.
Prolongez considérablement la durée de vie de votre plaqueuse de chants portable ou stationnaire. Le Cantspray Virutex est un spray antiadhésif sans silicone. Convient pour traiter toutes les pièces mobiles de votre plaqueuse de chants et empêcher l'accumulation de colle. Il est recommandé d'appliquer le Virutex Cantspray avant et après l'utilisation de votre machine pour un résultat optimal.
Weight
0,05 kg
0,05 kg
2 kg
24 kg
1 kg
0,300 kg
1 kg
2 kg
1 kg
1 kg
1,4 kg
0,5 kg
Dimensions
N/B
N/B
N/B
N/B
N/B
7,5 × 2 cm
N/B
N/B
N/B
N/B
N/B
N/B
Additional information
Gewicht
0,05 kg
Korrel
K60, K80, K100, K120, K150, K220
Gewicht
0,05 kg
Diameter
19mm
Snijlengte
14mm
Lengte
51mm
Radius
R4,8
Schacht
8mm
Snijvlakken
2
Gewicht
2 kg
Lengte
610 mm
Gewicht
24 kg
Voltage
230 V
Vermogen
90W
Nominale snelheid
400-1600rpm
Max. hoogte werkstuk
50mm
Max. diepte zaagsnede
406mm
Werkblad
380x250mm
Kanteling werkblad
-15° – 45°
Gewicht
1 kg
Zaagblad diameter
125mm, 150mm, 180mm
As diameter
30mm
Tand dikte
3,5mm
Zaagblad dikte
2,5mm
Aantal tanden
12, 18, 24
Gewicht
0,300 kg
Afmetingen
7,5 × 2 cm
Gewicht
1 kg
Gewicht
2 kg
Gewicht
1 kg
Diameter
160mm
As diameter
30mm, 50mm
Snijvlakken
4
Aantal tanden
4
Snijlengte
30mm
Freeshoogte
8-15mm
Toerental Min-Max
4800-8200
Gewicht
1 kg
Diameter
160mm
As diameter
50mm
Snijvlakken
2
Freeshoogte
50mm
Toerental Min-Max
4700-7000
Gewicht
1,4 kg
Vermogen
180W
Schuurdiameter
Ø125mm
Ø Rotatie
2mm
Nominale snelheid
7000-12500rpm
Trillingen
14000-25000/min
Gewicht
0,5 kg
Meld je aan voor onze nieuwsbrief
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Vergelijken
We gebruiken cookies om ervoor te zorgen dat onze website zo soepel mogelijk draait. Als je doorgaat met het gebruiken van de website, gaan we er vanuit dat je ermee instemt.OkPrivacy policy