Description | Universeel links-rechts getand zaagblad geschikt voor het verzagen van verschillende houtsoorten of houten platen. Kies voor het juiste aantal tanden voor een optimaal resultaat van uw project. Een laag aantal tanden is geschikt voor snel en ruw zaagwerk in massief hout. Een hoog aantal tanden behoeft een tragere zaagsnelheid maar zorgt voor een fijne en zuivere zaagsnede in zowel massief hout als plaatmateriaal.
Verkrijgbaar met verschillend aantal tanden. | Helical planing and routing cutterhead with reversible knives in high quality carbide (HW). This cutter head is developped for finishing, planing or calibrating on moulding machines. Optionally you can use a mold and run-up ring to make curved workpieces. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards.
Available with bore 30mm or 50mm. The heads can be fitted with spurs on one or both sides on demand.
| This electric vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. To make the table vacuum, it must be connected to the electric vacuum system SVE600 by Virutex (inlcuded). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. The head of the support can tilt 90° so that you can place the workpiece in an ideal position. On top of this, the top plate can be rotated 360°. The support must be secured with clamps (not included).
Using the standard supplied rubber seals, you can easily divide the table into smaller sections. Standard delivery with one rubber seal already installed and a transparent tube for the air supply with 1/4" quick-release coupling. | Extensions for the wheel kit WK600. Use the two bars (length: 915mm) to replace the original ones from your wheel kit. Transport larger machines without loss of carrying capacity. | Set profielmessen hoogte 40mm Nr. 0025 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | Set profielmessen hoogte 50mm Nr. 2017 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | Set profielmessen hoogte 40mm Nr. 0063 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | DERNIER MODÈLE !
Ce support à balles comporte 13 balles et mesure 45 cm x 28 cm.
La hauteur est réglable de 64 cm à 108 cm. |
Content | Universeel links-rechts getand zaagblad geschikt voor het verzagen van verschillende houtsoorten of houten platen. Kies voor het juiste aantal tanden voor een optimaal resultaat van uw project. Een laag aantal tanden is geschikt voor snel en ruw zaagwerk in massief hout. Een hoog aantal tanden behoeft een tragere zaagsnelheid maar zorgt voor een fijne en zuivere zaagsnede in zowel massief hout als plaatmateriaal. Verkrijgbaar met verschillend aantal tanden. | Helical planing and routing cutterhead with reversible knives in high quality carbide (HW). This cutter head is developped for finishing, planing or calibrating on moulding machines. Optionally you can use a mold and run-up ring to make curved workpieces. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards.
Available with bore 30mm or 50mm. The heads can be fitted with spurs on one or both sides on demand.
| This electric vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to the electric vacuum system SVE600 by Virutex (inlcuded). Thanks to its compact size, this vacuum table is suitable for use in the workshop as well as outdoors. The head of the support can tilt 90° so that you can place the workpiece in an ideal position. On top of this, the top plate can be rotated 360°. The support must be secured with clamps (not included). Because you can place the table both vertically and horizontally, this module is ideal for a wide range of applications. Clamp workpieces for gluing, milling, trimming, etc...
Using the standard supplied rubber seals, you can easily divide the table into smaller sections. This is very useful for securing small pieces, for example. To secure larger workpieces, the optional SVE680 auxiliary support is available. This support is specifically designed to connect to the SVE660 or SVE670 model. Standard delivery with one rubber seal already installed. | Extensions for the wheel kit WK600. Use the two bars (length: 915mm) to replace the original ones from your wheel kit. Transport larger machines without loss of carrying capacity. | Set profielmessen hoogte 40mm Nr. 0025 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | Set profielmessen hoogte 50mm Nr. 2017 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | Set profielmessen hoogte 40mm Nr. 0063 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort. | DERNIER MODÈLE !
Ce support à balles comporte 13 balles et mesure 45 cm x 28 cm.
La hauteur est réglable de 64 cm à 108 cm. |
Additional information |
Gewicht |
1 kg |
Zaagblad diameter |
180mm
|
As diameter |
20mm
|
Tand dikte |
2,6mm
|
Zaagblad dikte |
1,6mm
|
Aantal tanden |
24, 40, 56
|
Meeneemgaten |
2/6/32
|
|
Gewicht |
1 kg |
Diameter |
|
As diameter |
30mm, 50mm
|
Snijvlakken |
12
|
Freeshoogte |
76,5mm
|
Toerental Min-Max |
6000-17600
|
|
Gewicht |
1 kg |
Vermogen |
95W
|
Afmetingen werkvlak |
150x150mm
|
Vacuümdruk |
750mbar
|
|
|
Gewicht |
0,05 kg |
Afmetingen |
0,4 cm |
|
Gewicht |
0,05 kg |
Afmetingen |
0,5 cm |
|
Gewicht |
0,05 kg |
Afmetingen |
0,4 cm |
|
Gewicht |
10 kg |
Diameter kogels |
25 mm
|
Aantal kogels |
63 (9 x 7)
|
Max. draagkracht |
200 kg
|
Hoogte |
650-1100 mm
|
|