| Description | Template to be used on the Virutex FR129VB Router for door hinges to mill Argenta 80/80. This template is only suitable for the model 80/80 from Argenta. Other models available. Hinge not included. | Sturdy and high quality mould for milling dovetail joints to be placed on a workbench. Thanks to the robust, closed frame, the stability of this mould is unrivalled. Standard equipped with a jig with spacing 26mm. Use this mould with a Ø19mm guiding ring, included as standard with your Virutex router or available separately. Moulds with spacing 16mm or 34mm are optionally available. Clamps both parts of the joint. Compatible with Virutex routers.
If you use a straight router bit, you can also use this mould to make straight pin connections. Attention: It is not possible to mill the dovetails or pens without using a guiding ring. Both the guiding ring for jigs with spacing 26mm and the correct router bit: dovetail bit art. 6040050 or straight bit art. 1140060 are available separately. | Convenient all in one set to make dovetail joints with the Virutex PL11. The set includes an interchangeable PVC mould with tooth spacing (pas) 34mm, an adapted guide ring Ø23mm and the correct dovetail bit Ø19mm. Use this set to make large dovetail joints (e.g. for furniture). Minimum thickness of the wood to be able to work correctly is 24mm. | Convenient all in one set to make dovetail joints with the Virutex PL11. The set includes an interchangeable PVC mould with tooth spacing (pas) 16mm, an adapted guide ring Ø12mm and the correct dovetail bit Ø9,5mm. Use this set to make small dovetail joints (e.g. for jewellery boxes). Minimum thickness of the wood to be able to work correctly is 11mm. | This heavy table (carriage) moves smoothly on ball bearings. To be mounted on the spindle moulder TT1003T from the Revolution range. | Template to be used on the Virutex FR129VB Router for door hinges to mill Argenta Invisible Neo S-5. This template is only suitable for the model Invisible Neo S-5 by Argenta. Other models available. Hinge not included. | Tenoning hood and table to be used on the Spindle moulder TT1000ST from our Revolution range. Maximum diameter of the cutter under the hood is Ø320mm. |
| Content | Template to be used on the Virutex FR129VB Router for door hinges to mill Argenta 80/80. This template is only suitable for the model 80/80 from Argenta. Other models available. Hinge not included. | Sturdy and high quality mould for milling dovetail joints to be placed on a workbench. Thanks to the robust, closed frame, the stability of this unit is unrivalled. Standard equipped with a jig with a spacing of 26mm. Use this mould with a Ø19mm guiding ring, included as standard with your Virutex router or available separately. Moulds with spacing 16mm or 34mm are optionally available. These are offered as convenient all-in-one sets with the correct router bit and guiding ring.
If you use a straight router bit, you can also use this mould to make straight pin connections. Attention: It is not possible to mill the dovetails or pens without using a guiding ring. Both the guiding ring for jigs with spacing of 26mm and the correct router bit (dovetail bit art. 6040050 or straight bit art. 1140060) are available separately.
This mould can clamp both pieces of your dovetail joint so that the joint can be milled 100% precisely. The attachment is compatible with the following Virutex routers: FR66P, FR160P, FRE160P FR227R, FR278R, FRE317VD or AS93. Your router moves perfectly stable along the attachment, allowing you to mill the dovetails in one passage. Thanks to the PVC mould, your tungsten carbide cutter does not run the risk of damage. | Convenient all in one set to make dovetail joints with the Virutex PL11. The set includes an interchangeable PVC mould with tooth spacing (pas) 34mm, an adapted guide ring Ø23mm and the correct dovetail bit Ø19mm. Use this set to make large dovetail joints (e.g. for furniture). Minimum thickness of the wood to be able to work correctly is 24mm. | Convenient all in one set to make dovetail joints with the Virutex PL11. The set includes an interchangeable PVC mould with tooth spacing (pas) 16mm, an adapted guide ring Ø12mm and the correct dovetail bit Ø9,5mm. Use this set to make small dovetail joints (e.g. for jewellery boxes). Minimum thickness of the wood to be able to work correctly is 11mm. | This heavy table (carriage) moves smoothly on ball bearings. To be mounted on the spindle moulder TT1003T from the Revolution range. | Template to be used on the Virutex FR129VB Router for door hinges to mill Argenta Invisible Neo S-5. This template is only suitable for the model Invisible Neo S-5 by Argenta. Other models available. Hinge not included. | Tenoning hood and table to be used on the Spindle moulder TT1000ST from our Revolution range. Maximum diameter of the cutter under the hood is Ø320mm. Fully compliant with the current CE classification for this type of machine. |
