Reserve mes met verstelbare diameter 45mm-60mm voor de regelbare scharnierboor/forstnerboor van Sistemi Klein (art. nr. KL-R110600R).
Cet outil pratique vous permet de régler vos couteaux ou fers de raboteuse rapidement, facilement et avec précision. À l'aide des aimants, l'outil se fixe sur l'arbre de la raboteuse. Vous pouvez alors placer le fer dans la bonne position en un rien de temps. Livraison standard dans une caisse en bois soignée.
Practical support with wheels that makes it possible for one person to hold and transport all types of panels, heavy doors, wood, PVC, aluminium, etc. For pieces with a maximum thickness between 6mm and 110mm. Thanks to its robust design, the SPR770T easily supports pieces up to 200kg. The clamp is covered with a protective coating to prevent damage to your pieces. The SPR770T support is very easy to use. Secure your piece by placing it in the clamp and pressing. To unload it again, use the foot pedal.
With the help of the pneumatic wheels, the support can easily be moved, even on uneven ground. This mobile support even manages to overcome a few low steps without any problems. Thanks to the blocking system, you can also use this support for stationary work. In short, the ideal accessory for, for example, installers of doors that have to work on their own.
Filter cartridge with canister filter and residual bag for the Air Flux Dusty AF-950WM. The canister filter extracts dust down to a size of 1 micron, compared to 30 microns for the standard filter bag and 5 microns for the improved fiber filter bag. This filter is self-cleaning thanks to the convenient lever on top of the cartridge. Simply turn the lever to remove dust from the pleats in the filter, which then drops to the bottom into the included PVC residual bag.
This filter cartridge can also be used to upgrade your Air Flux AF-950 to a dust extraction rate of up to 1 micron.
Groefzaagblad met vlakke (FZ), widia zaagtanden om groeven te trekken in hardhout, zacht hout, gelamineerde panelen en andere producten op basis van hout. De zaagbladen hebben een asgat van 30mm en zijn ideaal voor gebruik op freesmachines of op zaagtafels.
Dit zaagblad is beschikbaar in verschillende diameters
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Deze 5mm legplankdragers kunnen gebruikt worden voor allerlei toepassingen binnen uw projecten. De legplankdragers zijn compatibel met de Kreg legplank boor van 5mm (KMA3215). Bevat 20 legplankdragers.
Connector diameter 100mm to connect multiple pieces of Air Flux accessories. To be used with the Air Flux dust extractors.
Set profielmessen hoogte 40mm Nr. 0062 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Saw ribbon with length 4590mm for use on the TT600 band saw machine from Tendotools. This saw blade has 14 TPI (teeth per inch) and has a width of 27mm. This bimetal bandsaw blade is very strong and, in addition to wood or plastics, is even suitable for sawing light metal alloys or, for example, aluminium. It is also advisable to use these saw blades for long-term use on hard woods.
Pennenkap en pennentafel om te gebruiken op de freesmachine Spindle TT1000ST uit onze Revolution reeks. Maximum diameter van de frees onder de pennenkap is Ø320mm.
The Combi TT400K5 is a combination machine from the Revolution line with a heavy welded steel frame with cast iron tables. It has three separate motors for sawing, planing and milling and is equipped with a wide anodized sliding table of 1500 mm. A mortiser with Westcott chuck is also included as a standard.
The adjustable roller supports workpieces up to 40 kg and can be used both horizontally and vertically. Chrome plated roller with ball bearings on a Heavy-Duty base. The base is equipped with a clamp that can be placed on any surface up to 6.5 cm thick. Height adjustment from 8cm - 40cm in relation to the clamp. The roller support can be quickly disassembled for storage when not in use.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Deze boor is verkrijgbaar in twee verschillende lengtes
Perfect wood joints, fast and efficient for all types of wood. Works with biscuits of 0, 10 and 20.
This biscuit joiner guarantees you very easy and sturdy wood connections. The cutter is supplied as standard. Thanks to this biscuit joiner you can make solid connections at any angle, with any type of wood.
Cutterset consisting of two elements in light alloy with reversible tungsten carbide knives (HW). Cutter set specifically designed to perform both high precision planing and chamfering. Suitable for machining wood with a height between 18mm and 50mm. The blades have a radius on the one hand and a chamfer of 45° on the other hand. The blades with radius R4 are mounted on the milling head as standard. Knives with radius R2, R3, R5 and R6 are available separately.
Because the knives are placed both above and below the cutterset, it is possible to round off/chamfer your workpiece in one passage. Thanks to the tungsten carbide blades, this profile cutter cuts effortlessly through solid boards or solid wood. Also suitable for use on sheet materials.
Set profielmessen hoogte 40mm Nr. 0050 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Kreg Blue-Kote pocket-hole screws with a square drive. The screw has a length of 32 mm (1.25") and a coarse thread, which makes it ideal for softwoods. It has a triple coating, making it corrosion resistant.
Content
Reserve mes met verstelbare diameter 45mm-60mm voor de regelbare scharnierboor/forstnerboor van Sistemi Klein (art. nr. KL-R110600R).
Cet outil pratique vous permet de régler vos couteaux ou fers de raboteuse rapidement, facilement et avec précision. À l'aide des aimants, l'outil se fixe sur l'arbre de la raboteuse. Vous pouvez alors placer le fer dans la bonne position en un rien de temps. Livraison standard dans une caisse en bois soignée.
Practical support with wheels that makes it possible for one person to hold and transport all types of panels, heavy doors, wood, PVC, aluminium, etc. For pieces with a maximum thickness between 6mm and 110mm. Thanks to its robust design, the SPR770T easily supports pieces up to 200kg. The clamp is covered with a protective coating to prevent damage to your pieces. The SPR770T support is very easy to use. Secure your piece by placing it in the clamp and pressing. To unload it again, use the foot pedal.
With the help of the pneumatic wheels, the support can easily be moved, even on uneven ground. This mobile support even manages to overcome a few low steps without any problems. Thanks to the blocking system, you can also use this support for stationary work. In short, the ideal accessory for, for example, installers of doors that have to work on their own.
Filter cartridge with canister filter and residual bag for the Air Flux Dusty AF-950WM. The canister filter extracts dust down to a size of 1 micron, compared to 30 microns for the standard filter bag and 5 microns for the improved fiber filter bag. This filter is self-cleaning thanks to the convenient lever on top of the cartridge. Simply turn the lever to remove dust from the pleats in the filter, which then drops to the bottom into the included PVC residual bag.
This filter cartridge can also be used to upgrade your Air Flux AF-950 to a dust extraction rate of up to 1 micron.
Groefzaagblad met vlakke (FZ), widia zaagtanden om groeven te trekken in hardhout, zacht hout, gelamineerde panelen en andere producten op basis van hout. De zaagbladen hebben een asgat van 30mm en zijn ideaal voor gebruik op freesmachines of op zaagtafels.
Dit zaagblad is beschikbaar in verschillende diameters
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Deze 5mm legplankdragers kunnen gebruikt worden voor allerlei toepassingen binnen uw projecten. De legplankdragers zijn compatibel met de Kreg legplank boor van 5mm (KMA3215). Bevat 20 legplankdragers.
Connector diameter 100mm to connect multiple pieces of Air Flux accessories. To be used with the Air Flux dust extractors.
Set profielmessen hoogte 40mm Nr. 0062 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Saw ribbon with length 4590mm for use on the TT600 band saw machine from Tendotools. This saw blade has 14 TPI (teeth per inch) and has a width of 27mm. This bimetal bandsaw blade is very strong and, in addition to wood or plastics, is even suitable for sawing light metal alloys or, for example, aluminium. It is also advisable to use these saw blades for long-term use on hard woods.
Pennenkap en pennentafel om te gebruiken op de freesmachine Spindle TT1000ST uit onze Revolution reeks. Maximum diameter van de frees onder de pennenkap is Ø320mm. Volledig conform de huidige CE-klassering voor dit type machines.
The combination machines of our Revolution line are among the absolute top segment thanks to their robust construction and the use of extremely solid materials.
The Combi TT400K5 Massif is the same machine as the TT320K5, but is equipped with heavier engines (3 x 5.5 HP). It has a heavy welded steel frame with cast iron tables. The machine is equipped with three separate motors. It is equipped with a wide anodized sliding table of 1500 mm.
The large saw blade is suitable for cross-cutting, mitre sawing, solid work… The saw is equipped with a large right-hand saw guide. The heavy-duty saw arm is mounted on a double support arm. A large right-hand saw guide is fitted as a standard. A 1 HP scoring unit with separate motor is also available as an option.
The 2-speed milling spindle has a large table opening and is equipped with several insert rings. A chip outlet is provided on the multi-adjustable milling cover and at the bottom of the milling table. The milling machine is further equipped with wide anodized milling guides.
The large cast iron planing tables have a long, angled adjustable anodized planing guide. The thicknesser has a large throughput height. The motorized throughput can be disabled. The planing and thicknessing table has a large flip-up cover for chip removal.
A mortiser with (left-turning) Westcott chuck is also provided as a standard.
The adjustable roller supports workpieces up to 40 kg and can be used both horizontally and vertically. Chrome plated roller with ball bearings on a Heavy-Duty base. The base is equipped with a clamp that can be placed on any surface up to 6.5 cm thick. Height adjustment from 8cm - 40cm in relation to the clamp. The roller support can be quickly disassembled for storage when not in use.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Deze boor is verkrijgbaar in twee verschillende lengtes
Perfect wood joints, fast and efficient for all types of wood.
This biscuit joiner guarantees you very easy and sturdy wood connections. The cutter is supplied as standard. Thanks to this biscuit joiner you can make solid connections at any angle, with any type of wood.
Cutterset consisting of two elements in light alloy with reversible tungsten carbide knives (HW). Cutter set specifically designed to perform both high precision planing and chamfering. Suitable for machining wood with a height between 18mm and 50mm. The blades have a radius on the one hand and a chamfer of 45° on the other hand. The blades with radius R4 are mounted on the milling head as standard. Knives with radius R2, R3, R5 and R6 are available separately.
Because the knives are placed both above and below the cutterset, it is possible to round off/chamfer your workpiece in one passage. Thanks to the tungsten carbide blades, this profile cutter cuts effortlessly through solid boards or solid wood. Also suitable for use on sheet materials.
Available with bore 30mm or 50mm.
Set profielmessen hoogte 40mm Nr. 0050 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Kreg Blue-Kote pocket-hole screws with a square drive. The screw has a length of 32 mm (1.25") and a coarse thread, which makes it extremely suitable for softwood, and is made of zinc.
The blue Kreg screws have a triple coating that makes the screw corrosion resistant. Therefore, the screws are excellent for outdoor or humid areas.
This screw is available in packs of 100 and 1200 pieces.
Weight
0,05 kg
0,5 kg
8 kg
2 kg
1 kg
0,05 kg
N/B
0,05 kg
0,05 kg
0,5 kg
10 kg
300 kg
2,70 kg
0,05 kg
3 kg
1 kg
0,05 kg
0,25 kg
Dimensions
N/B
N/B
N/B
50 cm
N/B
N/B
N/B
N/B
0,4 cm
N/B
N/B
N/B
45 cm
N/B
N/B
N/B
0,4 cm
N/B
Additional information
Gewicht
0,05 kg
Diameter
45-60mm
Gewicht
0,5 kg
Gewicht
8 kg
Max. dikte van het stuk
6-110mm
Max. draagkracht
200kg
Gewicht
2 kg
Afmetingen
50 cm
Gewicht
1 kg
Zaagblad diameter
125mm, 150mm
As diameter
30mm
Tand dikte
1,5mm
Zaagblad dikte
1,1mm
Aantal tanden
12, 18
Gewicht
0,05 kg
Diameter
38mm
Lengte
90mm
Schacht
10x60mm
Gewicht
0,05 kg
Diameter
100mm
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
0,5 kg
Lengte
4590mm
Breedte
27mm
Dikte
0,90mm
Gewicht
10 kg
Max. Ø frees
320mm
Gewicht
300 kg
Motor
5.5 PK
Voltage
3 x 400V
Werktafel (zagen/frezen)
1100 x 155 mm
Sliding tafel
760 x 500 mm
Sliding lengte
2000 mm
Freeshoogte
125 mm
Freesopening
250 mm
As diameter
30mm
Nominale snelheid (frezen)
3500 rpm, 7000 rpm
Ø Zaagblad
255-315 mm
Zaagdiepte 45°
43-65 mm
Zaagdiepte 90°
63-90 mm
Nominale snelheid (zagen)
4260 rpm
Ø Voorritser
150 mm
Nominale snelheid (voorritser)
8300 rpm
Werktafel (schaven)
1850 x 410 mm
Schaafbreedte
410 mm
Max. schaafdiepte
5 mm
Werktafel (vandikte)
800 x 400 mm
Max. afname vandikte
3 mm
Doorlaathoogte vandikte
3-225 mm
Aanvoersnelheid vandikte
3-12 m/min
Boorkop
16 mm
Boortafel
300 x 500 mm
Gewicht
2,70 kg
Afmetingen
45 cm
Laad capaciteit
40kg
Gewicht
0,05 kg
Diameter
22mm
Lengte
90mm, 120mm
Schacht
10x100mm, 10x60mm
Gewicht
3 kg
Vermogen
600 W
Freesdiepte
0 – 20 mm
Gewicht
1 kg
Diameter
139mm
As diameter
30mm, 50mm
Freeshoogte
18-50mm
Snijvlakken
2+2+2
Radius
R4
Hoek
45°
Toerental Min-Max
5500-9400
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
0,25 kg
Stuks in verpakking
100, 1200
Materiaal
Blue-Kote
Meld je aan voor onze nieuwsbrief
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Vergelijken
We gebruiken cookies om ervoor te zorgen dat onze website zo soepel mogelijk draait. Als je doorgaat met het gebruiken van de website, gaan we er vanuit dat je ermee instemt.OkPrivacy policy
