Using this easy upgrade you are able to elavate the filtration of your Air Flux Dust Extractor up to 30 times, significantly improving the air quality in your workshop. The high quality folded filter catches dust and finer particles down to 1µm, compared to 30µm for the standard filter and 5µm for the fibre filter bag. This filter is self-cleaning thanks to the convenient lever on top of the cartridge. Simply turn the lever to remove all dust piled up in the folds of the filter, the dust will fall down in the PVC waste bags below.
Klein® trimming bits with straight cut are suitable for smooth and well-finished edges on melamine and veneered panels. The ball bearing, having the same diameter of the cutters, trims any overlap leaving a flat and smooth edge. Two flutes provide fast cutting and good chipping ejection.
The adjustable roller supports workpieces up to 40 kg and can be used both horizontally and vertically. Chrome plated roller with ball bearings on a Heavy-Duty base. The base is equipped with a clamp that can be placed on any surface up to 6.5 cm thick. Height adjustment from 8cm - 40cm in relation to the clamp. The roller support can be quickly disassembled for storage when not in use.
Set profielmessen hoogte 50mm Nr. 2070 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Lame de scie avec 40 dents
Lame de scie avec denture alternée (WZ) et limiteur de copeau pour la coupe vite de long et travers des bois tendres, durs et exotiques, des panneaux agglomérés et nid d'abeille, des panneaux plaqués et stratifiés sur un côté. A utiliser sur les scies à table. Lame de scie silencieuse
Lame de scie avec 60 dents
Lame de scie avec denture alternée, brise-copeaux et conception anti-kickback. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour la coupe de bois dur et tendre. Peut également être utilisé pour le sciage de panneaux d'aggloméré ou de bois collé sur une face. Idéal pour les scies de chantier ou les scies circulaires à chevalet. Made in Germany, profitez de la solide qualité allemande.
The thicknessing unit is an indispensable tool for planing on the Belmash SDM2500 and makes it possible to obtain a workpiece of excellent quality. It has its own cutterblock that is driven via the motor of the SDM2500. With this unit you can plan thickness on the SDM2500 of 5-103mm and a planing width of 250mm.
Beweegbare bek voor gietijzeren lijmklem Maxipress M, systeem met volledig beschermde fijne schroefdraad
Cette tige durable s'adapte aux rainures d'onglet standard de 19 x 9 mm. Avec huit vis en nylon sur toute la longueur de la tige pour éviter tout jeu dans la rainure. Des trous de montage sont prévus tous les 127 mm. Idéal pour fixer les moules et les pinces.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Jeu de six bagues de remplissage en haute qualité avec un tolérance de 0,01. Les épaisseurs varient entre 0,1 mm et 1 mm avec des graduation de 0,1. Ces bagues sont disponibles avec un alésage de 30 mm (Ø45 mm) ou de 50 mm (Ø70 mm).
Klein® trimming bits with straight cut are suitable for smooth and well-finished edges on melamine and veneered panels. The ball bearing, having the same diameter of the cutters, trims any overlap leaving a flat and smooth edge. Two flutes provide fast cutting and good chipping ejection. The blades are specially sheared so you can work faster and splinter free.
Set profielmessen hoogte 40mm Nr. 0014 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Template to be used on the Virutex FR129VB Router for door hinges to mill Argenta Invisible Neo M6. This template is only suitable for the model Invisible Neo M6 by Argenta. Other models available. Hinge not included.
Haal nauwkeurigere en herhaalbare resultaten met uw freestafel dankzij deze unieke stop. U kunt de compacte aluminium stop wegklappen wanneer u hem niet gebruikt. Met de bijgeleverde cursor met precisielens is het meetlint van de geleiderail duidelijk zichtbaar. Compatibel met de freestafel en compacte freestafel van Kreg®.
Set profielmessen hoogte 40mm Nr. 0090 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Ce coupleur offre deux fonctions qui ne peuvent normalement être réalisées qu'en achetant plusieurs coupleurs et tuyaux. Tout d'abord, il divise la ligne principale en deux lignes avec une épissure en « Y » efficace et résistante aux obstructions. Deuxièmement, il réduit le diamètre du tuyau d'un seul tuyau de 100 mm à deux tuyaux de 63 mm, ce qui vous permet de vous connecter à des outils électriques généraux de plus petit diamètre, notamment des tables de toupie, des scies à ruban et une petite scie à table.
Astuce : Pour une efficacité maximale de votre extraction, les réducteurs doivent être placés le plus près possible de l'outil électrique.
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Ces fraises sont fournis de faces de coupe en carbide. Grâce à ces faces de coupe en carbide le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
Dankzij deze bolle radiusfrees kunt u op elke houtsoort een halfronde groef maken. Maak eenvoudig decoratieve groeven om grote verticale oppervlakken te breken of om meubels te versieren. Tenslotte zorgen de groeven ook voor een betere grip. Bijvoorbeeld te gebruiken bij het maken van handvaten of lades. Ga meerdere malen langs bij het verwijderen van grote hoeveelheden materiaal.
Set profielmessen hoogte 50mm Nr. 2074 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Lightweight and powerful mini orbital sander for high-quality sanding work. This machine combines a double movement, the sanding pad moves both orbital and rotary orbital. Thanks to the double movement during sanding, you always get a smooth surface without scratching your workpiece. The ergonomic design ensures a perfect grip and comfortable working. All the controls are easily accessible while working. Equipped with an integrated dust extractor and dust bag. With electronic speed control and brake system for the sanding pad. Standard delivered with a sanding pad with velcro.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Lame de scie à 56 dents
Lame de scie à dents de loup pour machines classiques, adaptée à la coupe rapide de différents types de bois, de bois humide ou de forêt. A utiliser sur les machines de chantier ou de construction, mais surtout pour les scies à bois de chauffage. Toute la lame de scie est finie en acier au chrome-vanadium de haute qualité. Made in Germany, profitez de la solide qualité allemande. Il est facile de s'affûter.
Universal saw blade with alternate top bevel teeth, suited for cutting of different wood types or wooden panels. Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing of solid wood. A high number of teeth calls for a lower operating speed but guarantees a clean cut of both solid wood and wood panels. Available with different number of teeth.
The Kreg Pocket-Hole Jig 720 Pro is the professional, fast and efficient connection system with premium accessories. With this system you can make very strong pocket holes in materials with a minimum thickness of 13 mm (1/2”) and a maximum thickness of 38 mm (1 1/2”).
The Kreg 720 Pro comes with a Docking Station. This extension provides more support for larger equipment and more storage space. The side pieces of the Docking Station can be easily folded to store the system when not in use. In addition, the side pieces can also be disconnected from the system so that you can create even more support for your workpiece.
You can measure the thickness of the material with the supplied material thickness gauge. At the bottom of the Kreg 720 is a built-in storage system for the drill, driver bits and material thickness gauge.
Set profielmessen hoogte 40mm Nr. 0057 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Saw blade with 36 teeth
Saw blade with alternate top bevel teeth, chip breakers and anti-kickback design. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for both shortening and longitudinal cutting of hard and soft types of wood. Can also be used for sawing chipboard or single-sided laminated wood. Ideal for construction site saws or tilting log saws. Made in Germany, take advantage of the extremely solid German quality.
L'accessoire d'affûtage 50K pour outils de tournage est la solution pour les tourneurs de bois qui recherchent un moyen facile de garder leurs ciseaux aiguisés. Conçu pour être utilisé avec la meuleuse humide, ce gabarit offre un moyen rapide et précis d'affûter vos ciseaux biseautés et creux.
Avec les porte-ciseaux fixés au gabarit, vous pouvez facilement déplacer vos ciseaux d'avant en arrière sur le porte-outil. Un bouton garantit que votre ciseau est bien verrouillé dans le gabarit. Les ciseaux creux ne nécessitent pas l'utilisation du porte-ciseaux ; il suffit d'appuyer le gabarit contre le porte-outil et d'affûter selon les besoins.
Grâce à l'accessoire d'affûtage 50K, vous pouvez désormais profiter sans souci de ciseaux aiguisés et efficaces !
Content
Zaagblad 235x30x24T
Voor alle handcirkelzagen:
Hitachi C9U series
Makita DHS900 series
Bosch GKS85 series
Metabo KS85 series
Using this easy upgrade you are able to elavate the filtration of your Air Flux Dust Extractor up to 30 times, significantly improving the air quality in your workshop. The high quality folded filter catches dust and finer particles down to 1µm, compared to 30µm for the standard filter and 5µm for the fibre filter bag. This filter is self-cleaning thanks to the convenient lever on top of the cartridge. Simply turn the lever to remove all dust piled up in the folds of the filter, the dust will fall down in the PVC waste bags below.
Klein® trimming bits with straight cut are suitable for smooth and well-finished edges on melamine and veneered panels. The ball bearing, having the same diameter of the cutters, trims any overlap leaving a flat and smooth edge. Two flutes provide fast cutting and good chipping ejection.
The adjustable roller supports workpieces up to 40 kg and can be used both horizontally and vertically. Chrome plated roller with ball bearings on a Heavy-Duty base. The base is equipped with a clamp that can be placed on any surface up to 6.5 cm thick. Height adjustment from 8cm - 40cm in relation to the clamp. The roller support can be quickly disassembled for storage when not in use.
Set profielmessen hoogte 50mm Nr. 2070 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Lame de scie avec 40 dents
Lame de scie avec denture alternée (WZ) et limiteur de copeau pour la coupe vite de long et travers des bois tendres, durs et exotiques, des panneaux agglomérés et nid d'abeille, des panneaux plaqués et stratifiés sur un côté. A utiliser sur les scies à table. Lames de scie silencieuses avec design anti-kickback.
Lame de scie avec 60 dents
Lame de scie avec denture alternée, brise-copeaux et conception anti-kickback. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour la coupe de bois dur et tendre. Peut également être utilisé pour le sciage de panneaux d'aggloméré ou de bois collé sur une face. Idéal pour les scies de chantier ou les scies circulaires à chevalet. Made in Germany, profitez de la solide qualité allemande.
The thicknessing unit is an indispensable tool for thickness planing on the Belmash SDM2500 and makes it possible to obtain a workpiece of excellent quality. It has its own cutterblock that is driven via the motor of the SDM2500. With this unit you can plan thickness on the SDM2500 of 5-103mm and a planing width of 250mm.
Beweegbare bek voor klem Maxipress M
Cette tige durable s'adapte aux rainures d'onglet standard de 19 x 9 mm. Avec huit vis en nylon sur toute la longueur de la tige pour éviter tout jeu dans la rainure. Des trous de montage sont prévus tous les 127 mm. Idéal pour fixer les moules et les pinces.
Jauge d'onglet avec un ajustement précis.
Si vous fabriquez des gabarits et des fixations pour votre scie à table, votre table de toupie, votre scie à ruban ou tout autre outil doté d'une fente d'onglet, vous avez besoin d'une tige qui s'adapte précisément (dans une fente d'onglet standard de 9 mm x 19 mm) et qui glisse en douceur. Celui-ci fait les deux
Des performances éprouvées
Il s'agit de la même barre réglable que celle qui équipe en standard notre guide d'onglet de précision, ce qui vous permet de bénéficier de la même précision éprouvée sur tous les gabarits que vous réalisez.
Ajustement intégré
Six vis en nylon sur toute la longueur de la tige peuvent être réglées d'un simple tour de tournevis pour rattraper le jeu dans la rainure de l'onglet. De cette façon, vous obtenez un ajustement exact qui dure des années.
Grande polyvalence.
Cette tige de 762 mm de long comporte des trous de fixation tous les 102 mm sur sa longueur, de sorte que vous pouvez fixer vos gabarits de différentes manières.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Jeu de six bagues de remplissage en haute qualité avec un tolérance de 0,01. Les épaisseurs varient entre 0,1 mm et 1 mm avec des graduation de 0,1. Ces bagues sont disponibles avec un alésage de 30 mm (Ø45 mm) ou de 50 mm (Ø70 mm).
Klein® trimming bits with straight cut are suitable for smooth and well-finished edges on melamine and veneered panels. The ball bearing, having the same diameter of the cutters, trims any overlap leaving a flat and smooth edge. Two flutes provide fast cutting and good chipping ejection. The blades are specially sheared so you can work faster and splinter free.
Set profielmessen hoogte 40mm Nr. 0014 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Template to be used on the Virutex FR129VB Router for door hinges to mill Argenta Invisible Neo M6. This template is only suitable for the model Invisible Neo M6 by Argenta. Other models available. Hinge not included.
Haal nauwkeurigere en herhaalbare resultaten met uw freestafel dankzij deze unieke stop. U kunt de compacte aluminium stop wegklappen wanneer u hem niet gebruikt. Met de bijgeleverde cursor met precisielens is het meetlint van de geleiderail duidelijk zichtbaar. Compatibel met de freestafel en compacte freestafel van Kreg®.
Set profielmessen hoogte 40mm Nr. 0090 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Ce coupleur offre deux fonctions qui ne peuvent normalement être réalisées qu'en achetant plusieurs coupleurs et tuyaux. Tout d'abord, il divise la ligne principale en deux lignes avec une épissure en « Y » efficace et résistante aux obstructions. Deuxièmement, il réduit le diamètre du tuyau d'un seul tuyau de 100 mm à deux tuyaux de 63 mm, ce qui vous permet de vous connecter à des outils électriques généraux de plus petit diamètre, notamment des tables de toupie, des scies à ruban et une petite scie à table.
Astuce : Pour une efficacité maximale de votre extraction, les réducteurs doivent être placés le plus près possible de l'outil électrique.
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Ces fraises sont fournis de faces de coupe en carbide. Grâce à ces faces de coupe en carbide le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
Dankzij deze bolle radiusfrees kunt u op elke houtsoort een halfronde groef maken. Maak eenvoudig decoratieve groeven om grote verticale oppervlakken te breken of om meubels te versieren. Tenslotte zorgen de groeven ook voor een betere grip. Bijvoorbeeld te gebruiken bij het maken van handvaten of lades. Ga meerdere malen langs bij het verwijderen van grote hoeveelheden materiaal.
Set profielmessen hoogte 50mm Nr. 2074 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Lightweight and powerful mini orbital sander for high-quality sanding work. This machine combines a double movement, the sanding pad moves both orbital and rotary orbital. Thanks to the double movement during sanding, you always get a smooth surface without scratching your workpiece. The ergonomic design ensures a perfect grip and comfortable working. All the controls are easily accessible while working. Equipped with an integrated dust extractor and dust bag. With electronic speed control and brake system for the sanding pad. Standard delivered with a sanding pad with velcro.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Lame de scie à 56 dents
Lame de scie à dents de loup pour machines classiques, adaptée à la coupe rapide de différents types de bois, de bois humide ou de forêt. A utiliser sur les machines de chantier ou de construction, mais surtout pour les scies à bois de chauffage. Toute la lame de scie est finie en acier au chrome-vanadium de haute qualité. Made in Germany, profitez de la solide qualité allemande. Il est facile de s'affûter.
Universal saw blade with alternate top bevel teeth, suited for cutting of different wood types or wooden panels. Make sure to use the right amount of teeth to achieve optimal results of your project. A low number of teeth is suited for fast-paced and rough sawing of solid wood. A high number of teeth calls for a lower operating speed but guarantees a clean cut of both solid wood and wood panels.
Available with different number of teeth.
The Kreg Pocket-Hole Jig 720 Pro is the professional, fast and efficient connection system with premium accessories. With this system you can make very strong pocket holes in materials with a minimum thickness of 13 mm (1/2”) and a maximum thickness of 38 mm (1 1/2”).
The Kreg 720 Pro comes with a Docking Station. This extension provides more support for larger equipment and more storage space. The side pieces of the Docking Station can be easily folded to store the system when not in use. In addition, the side pieces can also be disconnected from the system so that you can create even more support for your workpiece.
With the supplied material stop you make repetitive work even easier. You simply slide the stop onto the side piece of the Docking Station and this creates extra stability for your workpiece. The material stopper can be stored in the Docking Station after use.
The included steel Pocket-Hole Jig clamp is ideal for clamping your connection system to your work surface. This makes it a complete and professional connection system for your workbench. The clamp is also easy to store in the Docking Station after use.
Setting up the Kreg Jig 720 Pro is quick and easy. You simply put your material in the jig and push the handle down. The system then does all the work for you and adjusts to the correct thickness. The handle also gives you full control over the clamping force! In addition, the system has anti-slip material. This will hold your workpiece securely in place without marking your wood.
You can measure the thickness of the material with the supplied material thickness gauge. The following sizes are indicated on it: 1/2”, 3/4” and 1 1/2” (13, 19 and 38 mm). These measurements correspond to the measurements on the step drill. You tighten the drill stop to the correct size with the material thickness gauge which is also an Allen key.
At the bottom of the Kreg 720 Pro is a built-in storage system for the drill, screw bits and the material thickness gauge. Next to the storage space, the dimensions are shown, with several intermediate steps. This allows you to set the stop collar even more precisely on the drill bit.
The Kreg 720 Pro connection system also comes with an extraction piece that can be attached to the left and right of the drilling jig. An extraction hose can then be connected to this. In this way, dust and wood chips are sucked out of the way and you continue to have a good view of your work surface. This makes making pocket holes a lot more efficient.
The Kreg connection system can be used horizontally and vertically. This way you can make pocket holes however you want.
As you are used to from Kreg, this system is also built on durability. Thanks to the shock-resistant and durable plastic construction with a hardened steel core, you can rest assured that the system will last.
The 720 Pro comes with a whopping 160 Pocket-Hole screws in the two most popular sizes. You will also receive a project plan. So you can get started right away!
Set profielmessen hoogte 40mm Nr. 0057 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Saw blade with 36 teeth
Saw blade with alternate top bevel teeth, chip breakers and anti-kickback design. With few teeth for a rough and fast cut of the wood. Equipped with teeth in high quality carbide (widia). Suitable for both shortening and longitudinal cutting of hard and soft types of wood. Can also be used for sawing chipboard or single-sided laminated wood. Ideal for construction site saws or tilting log saws. Made in Germany, take advantage of the extremely solid German quality.
L'accessoire d'affûtage 50K pour outils de tournage est la solution pour les tourneurs de bois qui recherchent un moyen facile de garder leurs ciseaux aiguisés. Conçu pour être utilisé avec la meuleuse humide, ce gabarit offre un moyen rapide et précis d'affûter vos ciseaux biseautés et creux.
Avec les porte-ciseaux fixés au gabarit, vous pouvez facilement déplacer vos ciseaux d'avant en arrière sur le porte-outil. Un bouton garantit que votre ciseau est bien verrouillé dans le gabarit. Les ciseaux creux ne nécessitent pas l'utilisation du porte-ciseaux ; il suffit d'appuyer le gabarit contre le porte-outil et d'affûter selon les besoins.
Grâce à l'accessoire d'affûtage 50K, vous pouvez désormais profiter sans souci de ciseaux aiguisés et efficaces !
Weight
1 kg
11 kg
0,05 kg
2,70 kg
0,05 kg
1 kg
1 kg
16,5 kg
1,26 kg
0,5 kg
0,05 kg
0,05 kg
0,05 kg
0,05 kg
0,05 kg
0,1 kg
0,5 kg
0,05 kg
0,5 kg
0,05 kg
0,05 kg
0,05 kg
1,4 kg
0,05 kg
1 kg
1 kg
3 kg
0,05 kg
1 kg
1 kg
Dimensions
N/B
53 × 53 × 65 cm
N/B
45 cm
0,5 cm
N/B
N/B
N/B
N/B
76,2 cm
N/B
N/B
N/B
0,4 cm
N/B
N/B
N/B
0,4 cm
N/B
N/B
N/B
0,5 cm
N/B
N/B
N/B
N/B
N/B
0,4 cm
N/B
N/B
Additional information
Gewicht
1 kg
Gewicht
11 kg
Afmetingen
53 × 53 × 65 cm
Gewicht
0,05 kg
Diameter
9,5mm
Snijlengte
13mm
Lengte
54mm
Snijvlakken
2
Gewicht
2,70 kg
Afmetingen
45 cm
Laad capaciteit
40kg
Gewicht
0,05 kg
Afmetingen
0,5 cm
Gewicht
1 kg
Zaagblad diameter
450mm
As diameter
30mm
Tand dikte
4,2mm
Zaagblad dikte
2,8mm
Aantal tanden
40
Meeneemgaten
PH01
Gewicht
1 kg
Zaagblad diameter
700mm
As diameter
30mm
Tand dikte
4,2mm
Aantal tanden
60
Gewicht
16,5 kg
Vandikte capaciteit
5-103mm
Aantal messen
2
Schaafbreedte
250 mm
Gewicht
1,26 kg
Gewicht
0,5 kg
Afmetingen
76,2 cm
Gewicht
0,05 kg
Diameter
15mm
Snijlengte
19mm
Lengte
51mm
Snijvlakken
2
Gewicht
0,05 kg
As diameter
30mm, 50mm
Diameter
45mm, 70mm
Gewicht
0,05 kg
Diameter
16mm
Snijlengte
16mm
Lengte
56mm
Snijvlakken
2
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
0,05 kg
Diameter
23mm
Lengte
90mm
Schacht
10x60mm
Gewicht
0,1 kg
Gewicht
0,5 kg
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
0,5 kg
Diameter
63,5mm, 100mm
Gewicht
0,05 kg
Diameter
12,7mm
Snijlengte
19mm
Lengte
51mm
Snijvlakken
2
Gewicht
0,05 kg
Diameter
38mm
Snijlengte
32mm
Lengte
70mm
Radius
R19
Schacht
12mm
Snijvlakken
2
Gewicht
0,05 kg
Afmetingen
0,5 cm
Gewicht
1,4 kg
Vermogen
180W
Schuurdiameter
Ø125mm
Ø Rotatie
2mm
Nominale snelheid
7000-12500rpm
Trillingen
14000-25000/min
Gewicht
0,05 kg
Diameter
24mm
Lengte
90mm
Schacht
10x60mm
Gewicht
1 kg
Zaagblad diameter
450mm
As diameter
30mm
Tand dikte
2,2mm
Aantal tanden
56
Gewicht
1 kg
Zaagblad diameter
160mm
As diameter
30mm
Tand dikte
2,6mm
Zaagblad dikte
1,6mm
Aantal tanden
24, 30
Meeneemgaten
2/7/42
Gewicht
3 kg
Schacht boor
6.35 mm
Boordiameter
9.5 mm
Min. materiaaldikte
13 mm
Max. materiaaldikte
38 mm
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
1 kg
Zaagblad diameter
400mm
As diameter
30mm
Tand dikte
3,5mm
Aantal tanden
36
Gewicht
1 kg
Meld je aan voor onze nieuwsbrief
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Vergelijken
We gebruiken cookies om ervoor te zorgen dat onze website zo soepel mogelijk draait. Als je doorgaat met het gebruiken van de website, gaan we er vanuit dat je ermee instemt.OkPrivacy policy