Heteluchtpistool met elektronische temperatuurregeling en twee warmte-instellingen. Daarmee kan u het gereedschap steeds aanpassen aan het werk dat u uitvoert. Dit warmtepistool is erg geschikt voor het vormen of lassen van kunststoffen, werken met stickers/folies, het krimpen van draadwikkels en nog veel meer. Standaardlevering met een mondstuk. Bovendien is deze heat gun compatibel met de meeste accessoires die vandaag op de markt zijn.
Reserve rubber voor zuignappen met pomp. Inclusief beschermende cover. Kies onderaan de juiste rubber voor uw zuignap.
Set profielmessen hoogte 40mm Nr. 0054 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
The simple, adjustable system for one-person cabinet installation. The 7.9 m section of the mounting rail simplifies the positioning and installation of wall cabinets by temporarily holding the cabinets in place for you. With this system, you can use brackets to position up to 7.9 m of wall units until you can permanently attach them to wall studs. First, assemble the steel wall rails to ensure a level installation. Next, attach temporary hanging brackets to your cabinets. Then hook the cabinets in place against the wall. Fit and align the cabinets until you find the exact position in which you want to permanently mount them, and then you can easily attach them to the wall studs.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Raccord à diamètre 125-100mm à utiliser avec les systèmes d’aspiration Air Flux.
This electric vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to the electric vacuum system SVE600 by Virutex (inlcuded). The head of the support can tilt 90° so that you can place the workpiece in an ideal position. The support must be secured with clamps (not included). This support is specifically designed to connect to the SVE660 or SVE670 model. No direct connection to the electric vacuum system SVE600 as model SVE660 or SVE670.
The BOW FeatherDUO featherboard is a stackable version for higher workpieces. Like the FeatherPRO, it features an innovative use of high-density EVA Foam / foam feathers and clamping system that increase control over insertion, dramatically improve recoil and better protect your wood from damage. This compared to the general plastic feaherboards. EVA is a high density, closed cell material with long life that you don't have with the common plastic featherboards. Ideal for table saws, routers, guides
Set profielmessen hoogte 40mm Nr. 0057 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Wheeled saw cart (outfeed) for Timber Yard Champ TT400TX.
Set profielmessen hoogte 40mm Nr. 0000 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Deze boor wordt gebruikt om vierkante gaten te boren en rechthoekige sleuven te trekken in zachte en harde houtsoorten.
The Belmash clamping devices provide increased safety when working with your thicknessing machine. Safely plane beams or boards on any Belmash machine. The pusher ensures that the workpiece is clamped to the work surface. This facilitates the flow of material, giving you a clean and precise finish. These clamping devices are easy to install using the screws and washers. The opening can be adjusted by means of a handle on the top and the spring clip on the side. In this way, a good supply and pressure force is always assured.
This pusher is suitable to be used on the Belmash SDMR2500.
The CPL 200 carpenter's planer is made of aluminium and steel, and has an all-steel planing spindle with two knives.
The powerful motor, the sharp front edge and the front shavings exhaust make the machine perfectly operable while working with both dry and humid wood without clamming the slot due to the large amount of shavings. This allows for the planing of long beams in one go.
The planer's depth of cut is easily adjusted by a rotary knob from 0 to 3mm, which ensures that it continues to work smoothly and accurately even after long periods of use.
The CPL 200 is the perfect partner for every carpenter on a construction site.
Krachtige, roterende vlakschuurmachine die ontwikkelt is voor polijsten of schuurwerk met een hoogwaardige afwerking. De LR46L is goed uitgebalanceerd en levert kwalitatief hoogwaardig werk af, zonder dat u achteraf nog hoeft bij te werken. De standaard gemonteerde PUR-bodemplaat is nagenoeg onbreekbaar en staat toe om elk standaard schuurpapier te plaatsen. Optioneel is een bodemplaat met klittenband / velcro verkrijgbaar. Met dank aan het ergonomische ontwerp met handgreep vooraan en geïntegreerde antislipoppervlakken is deze machine erg comfortabel om mee te werken. En dat zowel voor rechts- als linkshandigen.
Tenslotte is deze vlakschuurmachine voorzien van een nieuw en uniek stofbeschermingssysteem. Dit om te voorkomen dat stof de kwetsbare delen beschadigt. Standaard is de LR46L voorzien van een geïntegreerde stofafzuiging en stofzak. Met dank aan deze verbeterde bescherming tegen stof en stofophoping gaan zowel uw machine als uw schuurpapier langer mee dan een klassieke vlakschuurder.
Set profielmessen hoogte 50mm Nr. 2019 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 40mm Nr. 0013 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
The length of this bit is 150mm
Slot mortising bits with chipbreaker, available with left or right hand rotation. These bits are well suited for drilling holes or grooves in most wood types. The bits have two cutting edges in 18% HSS steel and chip breakers.
Cette fraise à percer et affleurer peut être utiliser pour facilement percer et couper des ouvertures dans les plans de travail laminés. Le point 'V' peut facilement percer la couche supérieure des stratifiés. Le face à couper en carbide vous donne une finition parfait pour tous votre projets. La base de la fraise agit comme un guide suiveur.
Unique pour cette fraise sont les deux faces à couper. Cette caractéristique permet d'affleurer la couche supérieure et inférieure en même temps. Les deux faces à couper ont un longueur de coupe maximum de 18mm.
La TT255UTC offre toutes les possibilités d’une scie à onglet et, grâce à sa table supérieure avec guide, elle est également très adaptée à la coupe longitudinale de planches. Sa compacité et son faible poids la rendent particulièrement pratique à emporter lors de vos déplacements.
Le Belmash RS-02 est inestimable pour travailler avec des pièces de bois plus longues que ce que la table de travail peut supporter. Ce support à rouleaux offre un moyen sûr et facile de travailler avec ces pièces surdimensionnées. Facile et pratique à utiliser. Equipé de rouleaux en téflon pour éviter d'endommager votre pièce. Hauteur réglable entre 700mm et 1050mm.
Set profielmessen hoogte 40mm Nr. 0030 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Tube translucide avec poignée et vane d'arrêt pour utilisation avec les aspirateurs de marque Air Flux. Utilisez le Clean-Up Kit pour nettoyer votre atelier et pour aspirer le poussière et coupeaux de bois restant.
The Kreg Pocket-Hole Jig 520 Pro is a practical and versatile jointing system. This system allows you to create very solid pocket holes in materials with a minimum thickness of 13 mm and a maximum thickness of 38 mm.
The Pocket-Hole Jig 520 Pro has a number of unique points. For example, the jig has a 360° rotatable handle. This handle ensures that you can comfortably use the system on any project. In addition, the Pocket-Hole Jig 520 Pro has a built-in clamping system. You simply squeeze the handle until the material is clamped firmly enough. The non-slip material on the 520 Pro ensures that the jointing system will not shift, no matter what position you use the jig in. You can measure the thickness of the material with the supplied material thickness gauge.
Cutter of height 90mm can be used on spindle moulding machines with a bore of 30mm. This cutter head is suitable to be used with all our profile knives of height 90mm. These high profiles knives are mainly used for milling panelling, cornices or roof profiles.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Set profielmessen hoogte 40mm Nr. 0090 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 50mm Nr. 2015 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
De BELMASH PC 3000 paneeldrager is ontworpen om het werken met grote werkstukken (multiplex, gelamineerde spaanplaat, MDF, ...) te vergemakkelijken.
Dankzij het robuuste en mobiele ontwerp van de paneeldrager kunnen werkstukken tot een dikte van 40 mm gemakkelijk naar de machine of de werkbank worden verplaatst. De paneeldrager is uitgerust met zwenkwielen, een instelbare hoogte en is kantelbaar (verticaal - horizontaal) met behulp van een handig kliksysteem. Door de instelbare hoogte op deze platendrager is hij bruikbaar op alle machines en/of werktafels. Door hem op de juiste hoogte in te stellen en achter een machine te plaatsen kan hij ook worden gebruikt als tafeluitvoer.
Dankzij het ontwerp van de paneeldrager kan plaatmateriaal met een gewicht tot 100 kg door één persoon worden verplaatst, wat de productiviteit aanzienlijk zal verhogen en de kosten zal verlagen.
Set profielmessen hoogte 40mm Nr. 0018 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Le gabarit pour trous de poche 310 de Kreg® facilite le travail du bois, que vous commenciez votre premier projet de bricolage ou que vous travailliez le bois depuis des années. Le gabarit pour trous de poche 310 est doté d'un système de réglage simple et facile à comprendre, qui vous permet de travailler avec des planches et des contreplaqués de 13 à 38 mm d'épaisseur. Avec un guide de perçage en acier trempé et une butée d'épaisseur de matériau pratique.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
This set includes the same Easy-Set stop collar and material thickness gauge/hex wrench that come with Kreg 300-Series Pocket-Hole Jigs.
The stop collar features a window that aligns with the engraved markings on the Kreg Easy-Set Pocket-Hole Drill Bit to make setting the bit at the correct depth easy for materials from 13 to 38 mm thick. The material thickness gauge allows you to easily determine the thickness of the material. The gauge has markings for 13 mm (½”), 19 mm (¾”) and 38 mm (1½”) material thicknesses. The built-in hex wrench allows you to tighten the stop collar.
The stop collar also fits all other standard (9.5 mm diameter) Kreg pocket-hole drill bits.
Routing table for mounting on the saw and planer Belmash SDM2000 and SDM2500.
WOOD DUST IS HARMFULL TO YOUR HEALTH: proper dust extraction plays an important role in a safe and healthy working environment.
Unlike other standard protective hoods that offer limited protection from the saw blade and poor dust control, the ITAMAC Orca S17 is the ultimate protective hood designed for a safer working environment, cleaner workshops and an overall enjoyable working experience on your table saw. The transparent cover is height adjustable and equipped with a Ø 100 mm connection that ensures efficient extraction. This large connection ensures optimum suction without loss of air speed as is the case with other small-diameter protective caps. Can be used on almost all types of table saws: The robust steel upper arm swings smoothly away and back to the working position. The transparent protective cover is easy to lift for quick access to the saw blade. The upper arm is telescopically adjustable from +/-880 mm to a maximum of +/- 1700 mm and therefore fits 99% of all table saws including Itamac, SawStop, Harvey, Grizzly and many others.TIP: This extractor is universal and thus also fits all other classic circular saw tables!
ALSO VIEW THE ITAMAC BROCHURE HERE
Saw cart fix-body with guide (infeed) for Timber Yard Champ TT400TX.
Deze tafelsteun voor de PRL400 klemmen zorgt ervoor dat de klem stabiel op een tafel kan gezet worden waardoor klemmen een stuk makkelijker wordt.
This Belmash mortising table is compatible with the SDM2500 machine. The mortising table can be installed instead of the milling table. The mortising table can be fully adjusted in height and left / right. Includes two clamps for fixation of the workpiece.
Pièce de réduction à utiliser avec les modèles differents des aspirateurs Air Flux. A couper sur le propre diamètre.
Content
Heteluchtpistool met elektronische temperatuurregeling en twee warmte-instellingen. Daarmee kan u het gereedschap steeds aanpassen aan het werk dat u uitvoert. Dit warmtepistool is erg geschikt voor het vormen of lassen van kunststoffen, werken met stickers/folies, het krimpen van draadwikkels en nog veel meer. Standaardlevering met een mondstuk. Bovendien is deze heat gun compatibel met de meeste accessoires die vandaag op de markt zijn.
Reserve rubber voor zuignappen met pomp. Inclusief beschermende cover. Kies onderaan de juiste rubber voor uw zuignap.
Set profielmessen hoogte 40mm Nr. 0054 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
The simple, adjustable system for one-person cabinet installation. The 7.9 m section of the mounting rail simplifies the positioning and installation of wall cabinets by temporarily holding the cabinets in place for you. With this system, you can use brackets to position up to 7.9 m of wall units until you can permanently attach them to wall studs. First, assemble the steel wall rails to ensure a level installation. Next, attach temporary hanging brackets to your cabinets. Then hook the cabinets in place against the wall. Fit and align the cabinets until you find the exact position in which you want to permanently mount them, and then you can easily attach them to the wall studs.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Raccord à diamètre 125-100mm à utiliser avec les systèmes d’aspiration Air Flux.
This electric vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. To make the table vacuum, it must be connected to the electric vacuum system SVE600 by Virutex (inlcuded). The head of the support can tilt 90° so that you can place the workpiece in an ideal position. The support must be secured with clamps (not included). This support is specifically designed to connect to the SVE660 or SVE670 model. No direct connection to the electric vacuum system SVE600 as model SVE660 or SVE670.
The BOW FeatherDUO featherboard is a stackable version for higher workpieces. Like the FeatherPRO, it features an innovative use of high-density EVA Foam / foam feathers and clamping system that increase control over insertion, dramatically improve recoil and better protect your wood from damage. This compared to the general plastic feaherboards. EVA is a high density, closed cell material with long life that you don't have with the common plastic featherboards. Ideal for table saws, routers, guides
Set profielmessen hoogte 40mm Nr. 0057 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Wheeled saw cart (outfeed) for Timber Yard Champ TT400TX.
Set profielmessen hoogte 40mm Nr. 0000 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Om vierkante gaten te boren en rechthoekige sleuven te trekken in zachte en harde houtsoorten. Wordt gebruikt op vierkantgatboormachines.
The Belmash clamping devices provide increased safety when working with your thicknessing machine. Safely plane beams or boards on any Belmash machine. The pusher ensures that the workpiece is clamped to the work surface. This facilitates the flow of material, giving you a clean and precise finish. These clamping devices are easy to install using the screws and washers. The opening can be adjusted by means of a handle on the top and the spring clip on the side. In this way, a good supply and pressure force is always assured.
This pusher is suitable to be used on the Belmash SDMR2500.
The CPL 200 carpenter's planer is made of aluminium and steel, and has an all-steel planing spindle with two knives.
The powerful motor, the sharp front edge and the front shavings exhaust make the machine perfectly operable while working with both dry and humid wood without clamming the slot due to the large amount of shavings. This allows for the planing of long beams in one go.
The planer's depth of cut is easily adjusted by a rotary knob from 0 to 3mm, which ensures that it continues to work smoothly and accurately even after long periods of use.
The CPL 200 is the perfect partner for every carpenter on a construction site.
Krachtige, roterende vlakschuurmachine die ontwikkelt is voor polijsten of schuurwerk met een hoogwaardige afwerking. De LR46L is goed uitgebalanceerd en levert kwalitatief hoogwaardig werk af, zonder dat u achteraf nog hoeft bij te werken. De standaard gemonteerde PUR-bodemplaat is nagenoeg onbreekbaar en staat toe om elk standaard schuurpapier te plaatsen. Optioneel is een bodemplaat met klittenband / velcro verkrijgbaar. Met dank aan het ergonomische ontwerp met handgreep vooraan en geïntegreerde antislipoppervlakken is deze machine erg comfortabel om mee te werken. En dat zowel voor rechts- als linkshandigen.
Tenslotte is deze vlakschuurmachine voorzien van een nieuw en uniek stofbeschermingssysteem. Dit om te voorkomen dat stof de kwetsbare delen beschadigt. Standaard is de LR46L voorzien van een geïntegreerde stofafzuiging en stofzak. Met dank aan deze verbeterde bescherming tegen stof en stofophoping gaan zowel uw machine als uw schuurpapier langer mee dan een klassieke vlakschuurder.
Ook verkrijgbaar met een elektronische snelheidsregeling als model LRE46L.
Set profielmessen hoogte 50mm Nr. 2019 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 40mm Nr. 0013 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
The length of this bit is 150mm
Slot mortising bits with chipbreaker, available with left or right hand rotation. These bits are well suited for drilling holes or grooves in most wood types. The bits have two cutting edges in 18% HSS steel and chip breakers.
Cette fraise à percer et affleurer peut être utiliser pour facilement percer et couper des ouvertures dans les plans de travail laminés. Le point 'V' peut facilement percer la couche supérieure des stratifiés. Le face à couper en carbide vous donne une finition parfait pour tous votre projets. La base de la fraise agit comme un guide suiveur.
Unique pour cette fraise sont les deux faces à couper. Cette caractéristique permet d'affleurer la couche supérieure et inférieure en même temps. Les deux faces à couper ont un longueur de coupe maximum de 18mm.
La TT255UTC offre toutes les possibilités d’une scie à onglet et, grâce à sa table supérieure avec guide, elle est également très adaptée à la coupe longitudinale de planches. Sa compacité et son faible poids la rendent particulièrement pratique à emporter lors de vos déplacements.
L'utilisation de roulements à billes sur toutes les articulations assure une rotation précise de la table, de la tête et du système de basculement. Cette scie compacte et légère a un boîtier en aluminium moulé sous pression, une lame de scie très compacte de 255 mm avec 48 dents, une large table supérieure facilement réglable avec un guide robuste et une indication d’onglet claire. Le moteur a un entraînement par courroie qui fournit un grand couple et est placé à l'arrière, ce qui donne à la scie une grande profondeur de coupe.
La TT255UTC est également équipée d'une poignée verticale ergonomique en D, qui garantit que le mouvement de montée et de descente est effectué à partir du poignet plutôt que de l'épaule. Un autre avantage de cette poignée est qu'elle peut être utilisée aussi bien avec la main gauche qu'avec la main droite.
Le Belmash RS-02 est inestimable pour travailler avec des pièces de bois plus longues que ce que la table de travail peut supporter. Ce support à rouleaux offre un moyen sûr et facile de travailler avec ces pièces surdimensionnées. Facile et pratique à utiliser. Equipé de rouleaux en téflon pour éviter d'endommager votre pièce. Hauteur réglable entre 700mm et 1050mm.
Set profielmessen hoogte 40mm Nr. 0030 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Tube translucide avec poignée et vane d'arrêt pour utilisation avec les aspirateurs de marque Air Flux. Utilisez le Clean-Up Kit pour nettoyer votre atelier et pour aspirer le poussière et coupeaux de bois restant.
The Kreg Pocket-Hole Jig 520 Pro is a practical and versatile jointing system. This system allows you to create very solid pocket holes in materials with a minimum thickness of 13 mm and a maximum thickness of 38 mm.
The Pocket-Hole Jig 520 Pro has a number of unique points. For example, the jig has a 360° rotatable handle. This handle ensures that you can comfortably use the system on any project. In addition, the Pocket-Hole Jig 520 Pro has a built-in clamping system. You simply squeeze the handle until the material is clamped firmly enough. The non-slip material on the 520 Pro ensures that the jointing system will not shift, no matter what position you use the jig in.
You can measure the thickness of the material with the supplied material thickness gauge. The measurements on the gauge correspond to those on the drilling jig and EasySet drill bit. You slide the stop collar to the correct size using the material thickness gauge, which is also a hex wrench. This adjustable stop collar ensures repeat accuracy of the Kreg jointing system. By setting the stop collar once, you can thus make several pocket holes in succession in the same material thickness.
The built-in clamping system provides more repeat accuracy as well. The handle has a quick-reset function, which ensures that the clamp remains at approximately the same thickness. This allows you to work with material of the same thickness several times in a row, without having to squeeze the handle several times.
The Kreg Pocket-Hole Jig 520 Pro comes with no less than 100 pocket hole screws and a step-by-step project plan. The Kreg jointing system also comes with a 51 mm Kreg quick-release clamp, for clamping and assembling your workpiece.
Cutter of height 90mm can be used on spindle moulding machines with a bore of 30mm. This cutter head is suitable to be used with all our profile knives of height 90mm. These high profiles knives are mainly used for milling panelling, cornices or roof profiles.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. The router bit is solid carbide, with special micrograin finishing for best performance. Thanks to these combined qualities the router bit delivers high quality results for all your projects and a long working life. This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Set profielmessen hoogte 40mm Nr. 0090 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Set profielmessen hoogte 50mm Nr. 2015 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
De BELMASH PC 3000 paneeldrager is ontworpen om het werken met grote werkstukken (multiplex, gelamineerde spaanplaat, MDF, ...) te vergemakkelijken.
Dankzij het robuuste en mobiele ontwerp van de paneeldrager kunnen werkstukken tot een dikte van 40 mm gemakkelijk naar de machine of de werkbank worden verplaatst. De paneeldrager is uitgerust met zwenkwielen, een instelbare hoogte en is kantelbaar (verticaal - horizontaal) met behulp van een handig kliksysteem. Door de instelbare hoogte op deze platendrager is hij bruikbaar op alle machines en/of werktafels. Door hem op de juiste hoogte in te stellen en achter een machine te plaatsen kan hij ook worden gebruikt als tafeluitvoer.
Dankzij het ontwerp van de paneeldrager kan plaatmateriaal met een gewicht tot 100 kg door één persoon worden verplaatst, wat de productiviteit aanzienlijk zal verhogen en de kosten zal verlagen.
Set profielmessen hoogte 40mm Nr. 0018 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. These router bits are finished with carbide cutting edges. Thanks to the carbide cutting edges, the router bit delivers high quality results for all your projects and a long working life.
This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
Le gabarit pour trous de poche 310 de Kreg® facilite le travail du bois, que vous commenciez votre premier projet de bricolage ou que vous travailliez le bois depuis des années. Le gabarit pour trous de poche 310 est doté d'un système de réglage simple et facile à comprendre, qui vous permet de travailler avec des planches et des contreplaqués de 13 à 38 mm d'épaisseur. Avec un guide de perçage en acier trempé et une butée d'épaisseur de matériau pratique.
La jauge d'épaisseur de matériau et la mèche Easyset incluses font de la mise en place du gabarit un jeu d'enfant, et le pied antidérapant GripMaxx™ maintient le gabarit fermement en place, vous permettant de percer des trous de poche parfaitement placés à chaque fois. Avec sa construction durable et sa garantie à vie sur le guide de perçage, le gabarit pour trous de poche Kreg® 310 vous garantit des années de plaisir. Exactement ce que vous attendez de Kreg®, la première marque d'outils de poche.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Straight router bits are specifically designed for making grooves in most types of wood or several plastics. Together with two straight cutting edges, there is a special tip on the bottom (Z=2+1) which allows easy and precise boring. The router bit is solid carbide, with special micrograin finishing for best performance. Thanks to these combined qualities the router bit delivers high quality results for all your projects and a long working life. This router bit can be used to work on most wood types or plastics. Thanks to the high quality finish of the bit, it is also possible to make grooves on different plastics such as acrylics (plexiglass), polycarbonate, polypropylene or PVC. To be used in router milling machines or CNC machines.
This set includes the same Easy-Set stop collar and material thickness gauge/hex wrench that come with Kreg 300-Series Pocket-Hole Jigs.
The stop collar features a window that aligns with the engraved markings on the Kreg Easy-Set Pocket-Hole Drill Bit to make setting the bit at the correct depth easy for materials from 13 to 38 mm thick. The material thickness gauge allows you to easily determine the thickness of the material. The gauge has markings for 13 mm (½”), 19 mm (¾”) and 38 mm (1½”) material thicknesses. The built-in hex wrench allows you to tighten the stop collar.
The stop collar also fits all other standard (9.5 mm diameter) Kreg pocket-hole drill bits.
Routing table for mounting on the saw and planer Belmash SDM2000 and SDM2500.
Stationary saws are always equipped with a large dust outlet, e.g. Ø 100 mm a very common size. Dust extractors for stationary machines also start with this diameter of 100mm and as the power of the extractor increases, we branch off to 2 x 100mm, 3 x 100mm or even more. So this diameter of 100mm should always be maintained from dust collector to the saw machine. This is to maintain air speed, which converts into sufficient suction.
A stationary saw machine has a 100-mm dust outlet on the body of the machine but along the top of the saw table, the problem usually arises with every user for efficient extraction. Usually, these saw tables have a outlet or guard on the splitting wedge with a diameter of only 40 mm. This thin outlet hose at the top is then going to branch off to a 100mm to 40mm reducer. This change in diameter creates the problem: because here the air velocity will immediately be slowed down and thus the suction power of your extraction can never be optimally utilised.
The ORCA S17 floating hood is deployable to all types of saw tables or panel saws and has a direct suction from diameter 100mm to above the saw blade. Air velocity is optimal without airflow deceleration. Using efficient dust extraction, this dust hood will ensure clean air in your workshop and help remove the dust that accumulates on top of the workpiece. Furthermore, the large transparent dust cover ensures a clear view of your workpiece.
And as the word itself says "floating extractor": you can directly saw any height without being bothered by the classic guard mounted on the splitting wedge. That means you can make shallow cuts (grooves), dado cuts, and basically any type of cut you would normally make. You could even use a homemade carriage or jig with this hood.
Can be used on almost all types of table saws: The robust steel upper arm swings smoothly away and back to the working position. The transparent protective cover is easy to lift for quick access to the saw blade. The upper arm is telescopically adjustable from +/-880 mm to a maximum of +/- 1700 mm.
Rugged durability - The floating dust collector is made of heavy-duty powder-coated aluminium. The support legs connect under the extension table and provide rigidity for the large dust tube and saw blade guard.
Saw cart fix-body with guide (infeed) for Timber Yard Champ TT400TX.
Deze tafelsteun voor de PRL400 klemmen zorgt ervoor dat de klem stabiel op een tafel kan gezet worden waardoor klemmen een stuk makkelijker wordt.
This Belmash mortising table is compatible with the SDM2500 machine. The mortising table can be installed instead of the milling table. The mortising table can be fully adjusted in height and left / right. Includes two clamps for fixation of the workpiece.
Pièce de réduction à utiliser avec les modèles differents des aspirateurs Air Flux. A couper sur le propre diamètre.
Weight
0,75 kg
N/B
0,05 kg
10 kg
0,05 kg
0,05 kg
1 kg
2 kg
0,05 kg
10 kg
0,05 kg
0,01 kg
3,3 kg
14 kg
3 kg
0,05 kg
0,05 kg
0,05 kg
0,05 kg
18 kg
5,2 kg
0,05 kg
1 kg
2 kg
1 kg
0,05 kg
0,05 kg
0,05 kg
27 kg
0,05 kg
0,05 kg
0,5 kg
0,05 kg
0,05 kg
0,1 kg
3 kg
32 kg
10 kg
0,010 kg
9,7 kg
0,5 kg
Dimensions
N/B
N/B
0,4 cm
N/B
N/B
N/B
N/B
N/B
0,4 cm
N/B
0,4 cm
N/B
30 × 26 × 7 cm
N/B
N/B
0,5 cm
0,4 cm
N/B
N/B
620 × 490 × 420 cm
N/B
0,4 cm
N/B
N/B
9 cm
N/B
0,4 cm
0,5 cm
159 × 61,4 × 115 cm
0,4 cm
N/B
N/B
N/B
N/B
N/B
N/B
N/B
N/B
N/B
34 × 18,5 cm
N/B
Additional information
Gewicht
0,75 kg
Temperatuur
1: 300°C, 2: 525°C
Luchtstroom
400l/min
Gewicht
N/B
Diameter
20cm, 23cm
Voor de artikels
30100, 30110, 30131, 30132, 30132
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
10 kg
Gewicht
0,05 kg
Diameter
34mm
Lengte
90mm
Schacht
10x60mm
Gewicht
0,05 kg
Diameter
100mm, 125mm
Gewicht
1 kg
Vermogen
95W
Afmetingen werkvlak
150x150mm
Vacuümdruk
750mbar
Gewicht
2 kg
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
10 kg
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
0,01 kg
Diameter
6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm
Schacht
15,9 mm
Gewicht
3,3 kg
Afmetingen
30 × 26 × 7 cm
Max. hoogte werkstuk
63mm
Max. breedte werkstuk
270mm
Gewicht
14 kg
Vermogen
1500W
Voltage
230 V
Schaafbreedte
200 mm
Schaafdiepte
0-3 mm
Toerental schaafas
12.400
Lengte
490mm
Gewicht
3 kg
Vermogen
370W
Schuuroppervlakte
115x208mm
Ø Rotatie
2mm
Nominale snelheid
10000rpm
Trillingen
20000/min
Gewicht
0,05 kg
Afmetingen
0,5 cm
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
0,05 kg
Diameter
15mm
Lengte
150mm
Schacht
13x50mm
Draairichting
Links, Rechts
Gewicht
0,05 kg
Diameter
6mm
Snijlengte
19mm
Lengte
63mm
Snijvlakken
2+1
Gewicht
18 kg
Afmetingen
620 × 490 × 420 cm
Max. zaagdikte
40 mm
Voltage
230 V
Vermogen
1600 W
Snede 0° x 0°
150 x 70 mm
Snede 0° x 45°
100 x 70 mm
Snede 45° x 0°
150 x 45 mm
Snede 45° x 45°
55 x 45 mm
Zaagblad diameter
255 mm
Gewicht
5,2 kg
Draagkracht
50kg
Hoogte
700-1050mm
Voet
475x490mm
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
1 kg
Gewicht
2 kg
Schacht boor
6.35 mm
Boordiameter
9.5 mm
Min. materiaaldikte
13 mm
Max. materiaaldikte
38 mm
Gewicht
1 kg
Afmetingen
9 cm
Diameter
100mm
As diameter
30mm
Freeshoogte
100mm
Gewicht
0,05 kg
Diameter
7mm
Snijlengte
19mm
Lengte
51mm
Snijvlakken
2+1
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
0,05 kg
Afmetingen
0,5 cm
Gewicht
27 kg
Afmetingen
159 × 61,4 × 115 cm
Draagvermogen
100 kg
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
0,05 kg
Diameter
10mm
Snijlengte
25mm
Lengte
70mm
Schacht
12mm
Snijvlakken
2
Gewicht
0,5 kg
Gewicht
0,05 kg
Diameter
36mm
Lengte
90mm
Schacht
10x60mm
Gewicht
0,05 kg
Diameter
6mm
Snijlengte
19mm, 25mm
Lengte
51mm, 57mm
Snijvlakken
2+1
Gewicht
0,1 kg
Diameter boor
9.5 mm
Min. materiaaldikte
13 mm
Max. materiaaldikte
38 mm
Gewicht
3 kg
Gewicht
32 kg
Telescopische arm
adjustable between 90 cm and 175 cm
Diameter afzuiging
100 mm
Hoogte boven het werkblad
34,5 cm
Gewicht
10 kg
Gewicht
0,010 kg
Gewicht
9,7 kg
Afmetingen
34 × 18,5 cm
Gewicht
0,5 kg
Meld je aan voor onze nieuwsbrief
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Vergelijken
We gebruiken cookies om ervoor te zorgen dat onze website zo soepel mogelijk draait. Als je doorgaat met het gebruiken van de website, gaan we er vanuit dat je ermee instemt.OkPrivacy policy