Tweemaal uitgang Ø125mm voor gebruik met de Air Flux Cyclone stofafzuigingen. De grote diameter is 203mm, rechtstreeks aansluitbaar op de cycloon afzuiggroepen, met vertakkingen naar 2x125mm.
This pneumatic vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. The head of the support can tilt 90° so that you can place the workpiece in an ideal position. The support must be secured with clamps (not included). This support is specifically designed to connect to the SVN450 or SVN460 model. No direct connection to the compressor as model SVN450 or SVN460.
Set profielmessen hoogte 40mm Nr. 0041 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Het eenvoudige, verstelbare systeem voor het installeren van een kast door één persoon. Het 7,9 m gedeelte van de montagerail vereenvoudigt de positionering en installatie van wandkasten door de kasten tijdelijk voor je op hun plaats te houden. Met dit systeem kun je beugels gebruiken om tot 7,9 m aan wandkasten te positioneren totdat je ze permanent aan de wandstuds kunt bevestigen. Eerst monteer je de stalen wandrails om een niveau installatie te garanderen. Vervolgens bevestig je tijdelijke ophangbeugels aan je kasten. Haak de kasten dan op hun plaats tegen de muur. Pas en aligneer de kasten totdat je de exacte positie hebt gevonden waarin je ze permanent wilt monteren, en dan kun je ze gemakkelijk aan de wandstuds bevestigen.
WOOD DUST IS HARMFULL TO YOUR HEALTH: proper dust extraction plays an important role in a safe and healthy working environment.
Unlike other standard protective hoods that offer limited protection from the saw blade and poor dust control, the ITAMAC Orca S17 is the ultimate protective hood designed for a safer working environment, cleaner workshops and an overall enjoyable working experience on your table saw. The transparent cover is height adjustable and equipped with a Ø 100 mm connection that ensures efficient extraction. This large connection ensures optimum suction without loss of air speed as is the case with other small-diameter protective caps. Can be used on almost all types of table saws: The robust steel upper arm swings smoothly away and back to the working position. The transparent protective cover is easy to lift for quick access to the saw blade. The upper arm is telescopically adjustable from +/-880 mm to a maximum of +/- 1700 mm and therefore fits 99% of all table saws including Itamac, SawStop, Harvey, Grizzly and many others.TIP: This extractor is universal and thus also fits all other classic circular saw tables!
ALSO VIEW THE ITAMAC BROCHURE HERE
Set profielmessen hoogte 40mm Nr. 0065 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
The TT400 is a heavy-duty cut-and-miter saw for stationary use, equipped with a quiet, maintenance-free 3400 W (4.5 HP) induction motor, which can be used for both aluminium and wood.
Lame de scie avec 20 dents
Lame de scie de construction avec denture trapézoïdale et un large dos pour un meilleur soutien de la dent. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour une utilisation sur des palettes ou du bois avec des restes de clous,... Grâce au dos large, les dents risquent moins d'être endommagées si vous heurtez des clous ou d'autres débris dans le bois pendant le sciage. Idéal pour les scies de chantier ou les scies circulaires à chevalet. Made in Germany, profitez de la solide qualité allemande.
Replacement filter for the Air Flux Dusty AF-1100/45 Dust Extractor. Easy to replace, with protective cover available separately. Filters up to 5µm
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Grâce au face de coupe supplémentaire en bout de fraise (Z=2+1), c'est aussi possible de facilement faire de perçage. Ces fraises sont fournis de faces de coupe en carbide. Grâce à ces faces de coupe en carbide le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
The TT70H is a foldable, height-adjustable roller support on ball bearings. This entry-level is specifically intended for hobbyists.
Reserve mes met verstelbare diameter 45mm-60mm voor de regelbare scharnierboor/forstnerboor van Sistemi Klein (art. nr. KL-R110600R).
Cet outil pratique vous permet de régler vos couteaux ou fers de raboteuse rapidement, facilement et avec précision. À l'aide des aimants, l'outil se fixe sur l'arbre de la raboteuse. Vous pouvez alors placer le fer dans la bonne position en un rien de temps. Livraison standard dans une caisse en bois soignée.
Practical support with wheels that makes it possible for one person to hold and transport all types of panels, heavy doors, wood, PVC, aluminium, etc. For pieces with a maximum thickness between 6mm and 110mm. Thanks to its robust design, the SPR770T easily supports pieces up to 200kg. The clamp is covered with a protective coating to prevent damage to your pieces. The SPR770T support is very easy to use. Secure your piece by placing it in the clamp and pressing. To unload it again, use the foot pedal.
With the help of the pneumatic wheels, the support can easily be moved, even on uneven ground. This mobile support even manages to overcome a few low steps without any problems. Thanks to the blocking system, you can also use this support for stationary work. In short, the ideal accessory for, for example, installers of doors that have to work on their own.
Filter cartridge with canister filter and residual bag for the Air Flux Dusty AF-950WM. The canister filter extracts dust down to a size of 1 micron, compared to 30 microns for the standard filter bag and 5 microns for the improved fiber filter bag. This filter is self-cleaning thanks to the convenient lever on top of the cartridge. Simply turn the lever to remove dust from the pleats in the filter, which then drops to the bottom into the included PVC residual bag.
This filter cartridge can also be used to upgrade your Air Flux AF-950 to a dust extraction rate of up to 1 micron.
Groefzaagblad met vlakke (FZ), widia zaagtanden om groeven te trekken in hardhout, zacht hout, gelamineerde panelen en andere producten op basis van hout. De zaagbladen hebben een asgat van 30mm en zijn ideaal voor gebruik op freesmachines of op zaagtafels.
Dit zaagblad is beschikbaar in verschillende diameters
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Deze 5mm legplankdragers kunnen gebruikt worden voor allerlei toepassingen binnen uw projecten. De legplankdragers zijn compatibel met de Kreg legplank boor van 5mm (KMA3215). Bevat 20 legplankdragers.
Connector diameter 100mm to connect multiple pieces of Air Flux accessories. To be used with the Air Flux dust extractors.
Set profielmessen hoogte 40mm Nr. 0062 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Saw ribbon with length 4590mm for use on the TT600 band saw machine from Tendotools. This saw blade has 14 TPI (teeth per inch) and has a width of 27mm. This bimetal bandsaw blade is very strong and, in addition to wood or plastics, is even suitable for sawing light metal alloys or, for example, aluminium. It is also advisable to use these saw blades for long-term use on hard woods.
Pennenkap en pennentafel om te gebruiken op de freesmachine Spindle TT1000ST uit onze Revolution reeks. Maximum diameter van de frees onder de pennenkap is Ø320mm.
The Combi TT400K5 is a combination machine from the Revolution line with a heavy welded steel frame with cast iron tables. It has three separate motors for sawing, planing and milling and is equipped with a wide anodized sliding table of 1500 mm. A mortiser with Westcott chuck is also included as a standard.
The adjustable roller supports workpieces up to 40 kg and can be used both horizontally and vertically. Chrome plated roller with ball bearings on a Heavy-Duty base. The base is equipped with a clamp that can be placed on any surface up to 6.5 cm thick. Height adjustment from 8cm - 40cm in relation to the clamp. The roller support can be quickly disassembled for storage when not in use.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Deze boor is verkrijgbaar in twee verschillende lengtes
Perfect wood joints, fast and efficient for all types of wood. Works with biscuits of 0, 10 and 20.
This biscuit joiner guarantees you very easy and sturdy wood connections. The cutter is supplied as standard. Thanks to this biscuit joiner you can make solid connections at any angle, with any type of wood.
Cutterset consisting of two elements in light alloy with reversible tungsten carbide knives (HW). Cutter set specifically designed to perform both high precision planing and chamfering. Suitable for machining wood with a height between 18mm and 50mm. The blades have a radius on the one hand and a chamfer of 45° on the other hand. The blades with radius R4 are mounted on the milling head as standard. Knives with radius R2, R3, R5 and R6 are available separately.
Because the knives are placed both above and below the cutterset, it is possible to round off/chamfer your workpiece in one passage. Thanks to the tungsten carbide blades, this profile cutter cuts effortlessly through solid boards or solid wood. Also suitable for use on sheet materials.
Set profielmessen hoogte 40mm Nr. 0050 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Kreg Blue-Kote pocket-hole screws with a square drive. The screw has a length of 32 mm (1.25") and a coarse thread, which makes it ideal for softwoods. It has a triple coating, making it corrosion resistant.
Content
Tweemaal uitgang Ø125mm voor gebruik met de Air Flux Cyclone stofafzuigingen. De grote diameter is 203mm, rechtstreeks aansluitbaar op de cycloon afzuiggroepen, met vertakkingen naar 2x125mm.
This pneumatic vacuum table on tiltable support is designed to clamp smooth, non-porous workpieces. The vacuum between the base of the table and the workpiece ensures firm clamping and leaves no traces after use. The head of the support can tilt 90° so that you can place the workpiece in an ideal position. The support must be secured with clamps (not included). This support is specifically designed to connect to the SVN450 or SVN460 model. No direct connection to the compressor as model SVN450 or SVN460.
Set profielmessen hoogte 40mm Nr. 0041 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Het eenvoudige, verstelbare systeem voor het installeren van een kast door één persoon. Het 7,9 m gedeelte van de montagerail vereenvoudigt de positionering en installatie van wandkasten door de kasten tijdelijk voor je op hun plaats te houden. Met dit systeem kun je beugels gebruiken om tot 7,9 m aan wandkasten te positioneren totdat je ze permanent aan de wandstuds kunt bevestigen. Eerst monteer je de stalen wandrails om een niveau installatie te garanderen. Vervolgens bevestig je tijdelijke ophangbeugels aan je kasten. Haak de kasten dan op hun plaats tegen de muur. Pas en aligneer de kasten totdat je de exacte positie hebt gevonden waarin je ze permanent wilt monteren, en dan kun je ze gemakkelijk aan de wandstuds bevestigen.
Stationary saws are always equipped with a large dust outlet, e.g. Ø 100 mm a very common size. Dust extractors for stationary machines also start with this diameter of 100mm and as the power of the extractor increases, we branch off to 2 x 100mm, 3 x 100mm or even more. So this diameter of 100mm should always be maintained from dust collector to the saw machine. This is to maintain air speed, which converts into sufficient suction.
A stationary saw machine has a 100-mm dust outlet on the body of the machine but along the top of the saw table, the problem usually arises with every user for efficient extraction. Usually, these saw tables have a outlet or guard on the splitting wedge with a diameter of only 40 mm. This thin outlet hose at the top is then going to branch off to a 100mm to 40mm reducer. This change in diameter creates the problem: because here the air velocity will immediately be slowed down and thus the suction power of your extraction can never be optimally utilised.
The ORCA S17 floating hood is deployable to all types of saw tables or panel saws and has a direct suction from diameter 100mm to above the saw blade. Air velocity is optimal without airflow deceleration. Using efficient dust extraction, this dust hood will ensure clean air in your workshop and help remove the dust that accumulates on top of the workpiece. Furthermore, the large transparent dust cover ensures a clear view of your workpiece.
And as the word itself says "floating extractor": you can directly saw any height without being bothered by the classic guard mounted on the splitting wedge. That means you can make shallow cuts (grooves), dado cuts, and basically any type of cut you would normally make. You could even use a homemade carriage or jig with this hood.
Can be used on almost all types of table saws: The robust steel upper arm swings smoothly away and back to the working position. The transparent protective cover is easy to lift for quick access to the saw blade. The upper arm is telescopically adjustable from +/-880 mm to a maximum of +/- 1700 mm.
Rugged durability - The floating dust collector is made of heavy-duty powder-coated aluminium. The support legs connect under the extension table and provide rigidity for the large dust tube and saw blade guard.
Set profielmessen hoogte 40mm Nr. 0065 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
The TT400 is a heavy-duty cut-and-miter saw for stationary use, the largest of its kind.
The TT400 is equipped with a silent, maintenance-free 3400 W (4.5 HP) induction motor. It can be used for both aluminum and wood.
The use of ball bearings on all joints ensures precise rotation of the table, head and tilting system. The saw has a die-cast aluminum body and a heavy cast iron base (80 kg). The silent, maintenance-free 3400 W (4.5 HP) belt-driven induction motor is positioned at the rear of the head, giving the saw a large capacity and high torque. The saw blade has a 400 mm diameter and 80 teeth.
The TT400 is further equipped with a reversible handle with controls on the protective cover.
Lame de scie avec 20 dents
Lame de scie de construction avec denture trapézoïdale et un large dos pour un meilleur soutien de la dent. Avec peu de dents pour une coupe grossière et rapide du bois. Equipée de dents en carbure de haute qualité (widia). Convient pour une utilisation sur des palettes ou du bois avec des restes de clous,... Grâce au dos large, les dents risquent moins d'être endommagées si vous heurtez des clous ou d'autres débris dans le bois pendant le sciage. Idéal pour les scies de chantier ou les scies circulaires à chevalet. Made in Germany, profitez de la solide qualité allemande.
Replacement filter for the Air Flux Dusty AF-1100/45 Dust Extractor. Easy to replace, with protective cover available separately. Filters up to 5µm
Fraises à rainurer sont spécifiquement conçue pour faire des rainures dans des types de bois différents ou des plastiques. Grâce au face de coupe supplémentaire en bout de fraise (Z=2+1), c'est aussi possible de facilement faire de perçage. Ces fraises sont fournis de faces de coupe en carbide. Grâce à ces faces de coupe en carbide le fraise vous assure un résultat parfait de tous votre projets ét une longue durée de vie.
Ce fraise peut être utiliser avec le plupart de types de bois. Grâce a la qualité extraordinaire il est aussi possible d'utiliser les fraises sur les plastiques comme l'acrylat (Plexiglas), polycarbonate, polypropylène ou de PVC. A utiliser dans des défonceuses ou des machines CNC.
The TT70H is a foldable, height-adjustable roller support on ball bearings.
This model is an entry-level model, specifically intended for hobbyists. This roller support is sold by the pair.
The legs fold flat, allowing the support to be stored quickly and conveniently.
Reserve mes met verstelbare diameter 45mm-60mm voor de regelbare scharnierboor/forstnerboor van Sistemi Klein (art. nr. KL-R110600R).
Cet outil pratique vous permet de régler vos couteaux ou fers de raboteuse rapidement, facilement et avec précision. À l'aide des aimants, l'outil se fixe sur l'arbre de la raboteuse. Vous pouvez alors placer le fer dans la bonne position en un rien de temps. Livraison standard dans une caisse en bois soignée.
Practical support with wheels that makes it possible for one person to hold and transport all types of panels, heavy doors, wood, PVC, aluminium, etc. For pieces with a maximum thickness between 6mm and 110mm. Thanks to its robust design, the SPR770T easily supports pieces up to 200kg. The clamp is covered with a protective coating to prevent damage to your pieces. The SPR770T support is very easy to use. Secure your piece by placing it in the clamp and pressing. To unload it again, use the foot pedal.
With the help of the pneumatic wheels, the support can easily be moved, even on uneven ground. This mobile support even manages to overcome a few low steps without any problems. Thanks to the blocking system, you can also use this support for stationary work. In short, the ideal accessory for, for example, installers of doors that have to work on their own.
Filter cartridge with canister filter and residual bag for the Air Flux Dusty AF-950WM. The canister filter extracts dust down to a size of 1 micron, compared to 30 microns for the standard filter bag and 5 microns for the improved fiber filter bag. This filter is self-cleaning thanks to the convenient lever on top of the cartridge. Simply turn the lever to remove dust from the pleats in the filter, which then drops to the bottom into the included PVC residual bag.
This filter cartridge can also be used to upgrade your Air Flux AF-950 to a dust extraction rate of up to 1 micron.
Groefzaagblad met vlakke (FZ), widia zaagtanden om groeven te trekken in hardhout, zacht hout, gelamineerde panelen en andere producten op basis van hout. De zaagbladen hebben een asgat van 30mm en zijn ideaal voor gebruik op freesmachines of op zaagtafels.
Dit zaagblad is beschikbaar in verschillende diameters
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Deze 5mm legplankdragers kunnen gebruikt worden voor allerlei toepassingen binnen uw projecten. De legplankdragers zijn compatibel met de Kreg legplank boor van 5mm (KMA3215). Bevat 20 legplankdragers.
Connector diameter 100mm to connect multiple pieces of Air Flux accessories. To be used with the Air Flux dust extractors.
Set profielmessen hoogte 40mm Nr. 0062 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Saw ribbon with length 4590mm for use on the TT600 band saw machine from Tendotools. This saw blade has 14 TPI (teeth per inch) and has a width of 27mm. This bimetal bandsaw blade is very strong and, in addition to wood or plastics, is even suitable for sawing light metal alloys or, for example, aluminium. It is also advisable to use these saw blades for long-term use on hard woods.
Pennenkap en pennentafel om te gebruiken op de freesmachine Spindle TT1000ST uit onze Revolution reeks. Maximum diameter van de frees onder de pennenkap is Ø320mm. Volledig conform de huidige CE-klassering voor dit type machines.
The combination machines of our Revolution line are among the absolute top segment thanks to their robust construction and the use of extremely solid materials.
The Combi TT400K5 Massif is the same machine as the TT320K5, but is equipped with heavier engines (3 x 5.5 HP). It has a heavy welded steel frame with cast iron tables. The machine is equipped with three separate motors. It is equipped with a wide anodized sliding table of 1500 mm.
The large saw blade is suitable for cross-cutting, mitre sawing, solid work… The saw is equipped with a large right-hand saw guide. The heavy-duty saw arm is mounted on a double support arm. A large right-hand saw guide is fitted as a standard. A 1 HP scoring unit with separate motor is also available as an option.
The 2-speed milling spindle has a large table opening and is equipped with several insert rings. A chip outlet is provided on the multi-adjustable milling cover and at the bottom of the milling table. The milling machine is further equipped with wide anodized milling guides.
The large cast iron planing tables have a long, angled adjustable anodized planing guide. The thicknesser has a large throughput height. The motorized throughput can be disabled. The planing and thicknessing table has a large flip-up cover for chip removal.
A mortiser with (left-turning) Westcott chuck is also provided as a standard.
The adjustable roller supports workpieces up to 40 kg and can be used both horizontally and vertically. Chrome plated roller with ball bearings on a Heavy-Duty base. The base is equipped with a clamp that can be placed on any surface up to 6.5 cm thick. Height adjustment from 8cm - 40cm in relation to the clamp. The roller support can be quickly disassembled for storage when not in use.
Forstnerboor met cilindrische schacht voor het boren van potscharnieren in de meeste houtsoorten of plaatmaterialen. Deze hoogwaardige potscharnierboor met centerpunt is voorzien van twee widia-snijvlakken en twee widia-voorsnijders om een optimale afwerking van uw boorgat te garanderen. Enkel rechtse draairichting.
Deze boor is verkrijgbaar in twee verschillende lengtes
Perfect wood joints, fast and efficient for all types of wood.
This biscuit joiner guarantees you very easy and sturdy wood connections. The cutter is supplied as standard. Thanks to this biscuit joiner you can make solid connections at any angle, with any type of wood.
Cutterset consisting of two elements in light alloy with reversible tungsten carbide knives (HW). Cutter set specifically designed to perform both high precision planing and chamfering. Suitable for machining wood with a height between 18mm and 50mm. The blades have a radius on the one hand and a chamfer of 45° on the other hand. The blades with radius R4 are mounted on the milling head as standard. Knives with radius R2, R3, R5 and R6 are available separately.
Because the knives are placed both above and below the cutterset, it is possible to round off/chamfer your workpiece in one passage. Thanks to the tungsten carbide blades, this profile cutter cuts effortlessly through solid boards or solid wood. Also suitable for use on sheet materials.
Available with bore 30mm or 50mm.
Set profielmessen hoogte 40mm Nr. 0050 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Kreg Blue-Kote pocket-hole screws with a square drive. The screw has a length of 32 mm (1.25") and a coarse thread, which makes it extremely suitable for softwood, and is made of zinc.
The blue Kreg screws have a triple coating that makes the screw corrosion resistant. Therefore, the screws are excellent for outdoor or humid areas.
This screw is available in packs of 100 and 1200 pieces.
Weight
2 kg
1 kg
0,05 kg
10 kg
32 kg
0,05 kg
80 kg
1 kg
1 kg
0,05 kg
10 kg
0,05 kg
0,5 kg
8 kg
2 kg
1 kg
0,05 kg
N/B
0,05 kg
0,05 kg
0,5 kg
10 kg
300 kg
2,70 kg
0,05 kg
3 kg
1 kg
0,05 kg
0,25 kg
Dimensions
N/B
N/B
0,4 cm
N/B
N/B
0,4 cm
N/B
N/B
N/B
N/B
650 × 450 × 110 cm
N/B
N/B
N/B
50 cm
N/B
N/B
N/B
N/B
0,4 cm
N/B
N/B
N/B
45 cm
N/B
N/B
N/B
0,4 cm
N/B
Additional information
Gewicht
2 kg
Gewicht
1 kg
Afmetingen werkvlak
150x150mm
Vacuumkracht
800gr/cm² bij 6 bar
Werkdruk
5,5-7 bar
Luchtverbruik bij 5,5 bar
28l/min
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
10 kg
Gewicht
32 kg
Telescopische arm
adjustable between 90 cm and 175 cm
Diameter afzuiging
100 mm
Hoogte boven het werkblad
34,5 cm
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
80 kg
Max. zaagdikte
125 mm
Zaagblad diameter
400mm
Asgat
30 mm
Snede 0° x 0°
125 x 205 mm
Snede 0° x 45°
205 x 65 mm
Snede 45° x 0°
125 x 145 mm
Snede 45° x 45°
145 x 65 mm
Vermogen
3400 W
Voltage
230 V, 400 V
Motor
4.5 PK
Gewicht
1 kg
Zaagblad diameter
350mm
As diameter
30mm
Tand dikte
3,5mm
Aantal tanden
24
Gewicht
1 kg
Gewicht
0,05 kg
Diameter
10mm
Snijlengte
19mm, 25mm
Lengte
51mm, 57mm
Snijvlakken
2+1
Gewicht
10 kg
Afmetingen
650 × 450 × 110 cm
Lengte steun
345 mm
Diameter rol
35 mm
Max. draagkracht
35 kg
Hoogte
610-960 mm
Gewicht
0,05 kg
Diameter
45-60mm
Gewicht
0,5 kg
Gewicht
8 kg
Max. dikte van het stuk
6-110mm
Max. draagkracht
200kg
Gewicht
2 kg
Afmetingen
50 cm
Gewicht
1 kg
Zaagblad diameter
125mm, 150mm
As diameter
30mm
Tand dikte
1,5mm
Zaagblad dikte
1,1mm
Aantal tanden
12, 18
Gewicht
0,05 kg
Diameter
38mm
Lengte
90mm
Schacht
10x60mm
Gewicht
0,05 kg
Diameter
100mm
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
0,5 kg
Lengte
4590mm
Breedte
27mm
Dikte
0,90mm
Gewicht
10 kg
Max. Ø frees
320mm
Gewicht
300 kg
Motor
5.5 PK
Voltage
3 x 400V
Werktafel (zagen/frezen)
1100 x 155 mm
Sliding tafel
760 x 500 mm
Sliding lengte
2000 mm
Freeshoogte
125 mm
Freesopening
250 mm
As diameter
30mm
Nominale snelheid (frezen)
3500 rpm, 7000 rpm
Ø Zaagblad
255-315 mm
Zaagdiepte 45°
43-65 mm
Zaagdiepte 90°
63-90 mm
Nominale snelheid (zagen)
4260 rpm
Ø Voorritser
150 mm
Nominale snelheid (voorritser)
8300 rpm
Werktafel (schaven)
1850 x 410 mm
Schaafbreedte
410 mm
Max. schaafdiepte
5 mm
Werktafel (vandikte)
800 x 400 mm
Max. afname vandikte
3 mm
Doorlaathoogte vandikte
3-225 mm
Aanvoersnelheid vandikte
3-12 m/min
Boorkop
16 mm
Boortafel
300 x 500 mm
Gewicht
2,70 kg
Afmetingen
45 cm
Laad capaciteit
40kg
Gewicht
0,05 kg
Diameter
22mm
Lengte
90mm, 120mm
Schacht
10x100mm, 10x60mm
Gewicht
3 kg
Vermogen
600 W
Freesdiepte
0 – 20 mm
Gewicht
1 kg
Diameter
139mm
As diameter
30mm, 50mm
Freeshoogte
18-50mm
Snijvlakken
2+2+2
Radius
R4
Hoek
45°
Toerental Min-Max
5500-9400
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
0,25 kg
Stuks in verpakking
100, 1200
Materiaal
Blue-Kote
Meld je aan voor onze nieuwsbrief
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Vergelijken
We gebruiken cookies om ervoor te zorgen dat onze website zo soepel mogelijk draait. Als je doorgaat met het gebruiken van de website, gaan we er vanuit dat je ermee instemt.OkPrivacy policy