Set profielmessen hoogte 40mm Nr. 0002 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
WOOD DUST IS HARMFULL TO YOUR HEALTH: proper dust extraction plays an important role in a safe and healthy working environment.
Unlike other standard protective hoods that offer limited protection from the saw blade and poor dust control, the ITAMAC Orca S17 is the ultimate protective hood designed for a safer working environment, cleaner workshops and an overall enjoyable working experience on your table saw. The transparent cover is height adjustable and equipped with a Ø 100 mm connection that ensures efficient extraction. This large connection ensures optimum suction without loss of air speed as is the case with other small-diameter protective caps. Can be used on almost all types of table saws: The robust steel upper arm swings smoothly away and back to the working position. The transparent protective cover is easy to lift for quick access to the saw blade. The upper arm is telescopically adjustable from +/-880 mm to a maximum of +/- 1700 mm and therefore fits 99% of all table saws including Itamac, SawStop, Harvey, Grizzly and many others.TIP: This extractor is universal and thus also fits all other classic circular saw tables!
ALSO VIEW THE ITAMAC BROCHURE HERE
Cutterhead with fixed blades and spurs in high quality carbide (HW) for making precision grooves. Adjustable in height between 14mm and 28mm by means of spacer rings. Spacer rings sold seperately. Use this cutterhead also for milling tenons or for rabbeting. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards. Equipped with knives with dimensions 14x14mm.
Available in diameter 140mm or 150mm.
Universal cutter head which can hold almost every profile knive currently available on the market. This cutter head can carry both profile knives of height 40mm or 50mm as well as replaceable and reversible knives up to height 50mm. Thanks to the pre-cutters at the top and bottom, your work always has a clean finish. Also suitable for rabbeting.
Remote control to be used with the Air Flux Cyclone Dust extractors Air Flux 2000CKH and Air Flux 3000CKH.
Deze boor- en uitloopfrees kan gebruikt worden om eenvoudig én snel openingen te maken in (houten) plaatmaterialen. De V-punt perforeert snel de bovenlaag van gelamineerde panelen of fineerplaten. Dankzij de hardmetalen (widia) snijkop is een precieze afwerking van uw freeswerken te allen tijde gegarandeerd. De spits van de frees fungeert tijdens de bewerkingen als geleider.
Cutter head in light alloy with reversible blades in high quality tungsten carbide (HW). This cutter head was specifically made for manufacturing 45° mitre joints for furnitre, coffins or boards. The connection is made in two steps. The first half of the connection is cut horizontally. Cut the second half of the connection vertically along the guide. Thanks to the tungsten carbide blades, this grooving cutter cuts effortlessly through solid boards or solid woods. The cutter is also suitable for MDF.
The GuidePRO features a silicone spring that applies a constant pressure along the vertical edge of the workpiece to ensure even contact between the workpiece and the guide, giving the best possible cut. The silicone spring flexes to accommodate variations in material shape and dampen vibrations. The spring is also easy to replace if damaged.
Kreg Blue-Kote pocket-hole screws with a square drive. The screw has a length of 64 mm (2 1/2″) and a coarse thread, which makes it ideally suited for softwood It has a triple coating, making it corrosion resistant.
Cette fraise est conçue pour fraiser facilement et rapidement des bords droits ou des rainures. Grâce à ses tranchants en carbure de haute qualité (widia), cette fraise peut être utilisée sur la plupart des types de bois. Facile à utiliser en utilisant le roulement à billes comme guide. Cette fraise est parfaitement adapté au traitement des matériaux stratifiés ou des feuilles de placage.
Set profielmessen hoogte 40mm Nr. 0006 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Porte outils d'une hauteur de 90 mm pour utilisation sur des fraiseuses à broche de 30 mm. Cette tête peut être utilisée avec tous nos couteaux de profil de hauteur 90 mm. Ces hauts profils sont principalement utilisés pour le fraisage des lambris, des corniches ou des profils de toit.
The BELMASH PC 3000 panel carrier is designed to facilitate work with large workpieces (plywood, laminated chipboard, MDF, etc.).
Thanks to the robust and mobile design of the panel carrier, workpieces up to a thickness of 40 mm can be easily moved to the machine or workbench. The panel carrier is equipped with swivel castors, an adjustable height and is tiltable (vertically - horizontally) by means of a convenient click system. The adjustable height of this plate carrier means that it can be used on all machines and/or work tables. By adjusting it to the right height and placing it behind a machine, it can also be used as a table-top output.
The design of the panel carrier allows panels weighing up to 100 kg to be moved by one person, which significantly increases productivity and reduces costs.
Universeel links-rechts getand zaagblad geschikt voor het verzagen van verschillende houtsoorten of houten platen. Kies voor het juiste aantal tanden voor een optimaal resultaat van uw project. Een laag aantal tanden is geschikt voor snel en ruw zaagwerk in massief hout. Een hoog aantal tanden behoeft een tragere zaagsnelheid maar zorgt voor een fijne en zuivere zaagsnede in zowel massief hout als plaatmateriaal.
Verkrijgbaar met verschillend aantal tanden.
Bandsaw blade with length 3607mm for use on the TT500X band saw machine from Tendotools. This saw blade has 14 TPI (teeth per inch) and has a width of 27mm. This bimetal bandsaw blade is very strong and, in addition to wood or plastics, is even suitable for sawing light metal alloys or, for example, aluminium. It is also advisable to use these saw blades for long-term use on hard woods.
Hardmetalen ketting met widia tanden voor mobiele kettingzaag voor cellenbeton MCS400.
Set profielmessen hoogte 40mm Nr. 0024 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
The Combi TT320K5 Massif is a combination machine from the Revolution line with a heavy welded steel frame with cast iron tables. It has three separate motors for sawing, planing and milling and is equipped with a wide anodized sliding table of 1500 mm. A mortiser with Westcott chuck is also included as a standard.
The Kreg Top Trak is an aluminium track that can be easily attached to an existing fence. Due to the L-shape, the track fits well to the existing stop. Drill Ø 3 mm holes on the back and attach with the screws provided. Length 1219 mm (48"). Suitable for use with 6 and 6.3 mm bolts.
For use as an extension for the KMS8000 precision cutting rail from Kreg.
Also available in 610 mm length.
Ce chariot de transport auto-serrant est la solution pour transporter facilement des portes, des cadres, des panneaux, etc. dans le secteur du bâtiment et dans les ateliers. Il a une capacité de charge allant jusqu'à 200 kg.
Replacement waste bags PVC 120µm to be used with the Air Flux 3000CKH Cyclone. These bags are to be used underneath the filter.
Showroommodel
Deze compacte combinatiemachine uit de Hobby+ Series is een absolute topper binnen zijn prijsklasse. De ideale machine voor elke houtbewerker die thuis, of in een kleine werkplaats aan de slag gaat. Opgebouwd uit twee verschillende machines biedt deze Combi Workcentre u drie functies: verzagen, frezen en vlak- en vandikte. Elke functie wordt aangedreven met behulp van een aparte 230V inductiemotor. Deze combinatiemachine kan ook opgedeeld worden in twee delen. Op deze manier kan u apart gebruiken van de zaagtafel + freesmachine en van de vlak- en vandiktebank.
Wielkit WK600 optioneel verkrijgbaar. Opgelet! De wielkit kan alleen gebruikt worden mits gebruik van de verlengstukken.
Content
Set profielmessen hoogte 40mm Nr. 0002 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Stationary saws are always equipped with a large dust outlet, e.g. Ø 100 mm a very common size. Dust extractors for stationary machines also start with this diameter of 100mm and as the power of the extractor increases, we branch off to 2 x 100mm, 3 x 100mm or even more. So this diameter of 100mm should always be maintained from dust collector to the saw machine. This is to maintain air speed, which converts into sufficient suction.
A stationary saw machine has a 100-mm dust outlet on the body of the machine but along the top of the saw table, the problem usually arises with every user for efficient extraction. Usually, these saw tables have a outlet or guard on the splitting wedge with a diameter of only 40 mm. This thin outlet hose at the top is then going to branch off to a 100mm to 40mm reducer. This change in diameter creates the problem: because here the air velocity will immediately be slowed down and thus the suction power of your extraction can never be optimally utilised.
The ORCA S17 floating hood is deployable to all types of saw tables or panel saws and has a direct suction from diameter 100mm to above the saw blade. Air velocity is optimal without airflow deceleration. Using efficient dust extraction, this dust hood will ensure clean air in your workshop and help remove the dust that accumulates on top of the workpiece. Furthermore, the large transparent dust cover ensures a clear view of your workpiece.
And as the word itself says "floating extractor": you can directly saw any height without being bothered by the classic guard mounted on the splitting wedge. That means you can make shallow cuts (grooves), dado cuts, and basically any type of cut you would normally make. You could even use a homemade carriage or jig with this hood.
Can be used on almost all types of table saws: The robust steel upper arm swings smoothly away and back to the working position. The transparent protective cover is easy to lift for quick access to the saw blade. The upper arm is telescopically adjustable from +/-880 mm to a maximum of +/- 1700 mm.
Rugged durability - The floating dust collector is made of heavy-duty powder-coated aluminium. The support legs connect under the extension table and provide rigidity for the large dust tube and saw blade guard.
Cutterhead with fixed blades and spurs in high quality carbide (HW) for making precision grooves. Adjustable in height between 14mm and 28mm by means of spacer rings. Spacer rings sold seperately. Use this cutterhead also for milling tenons or for rabbeting. Thanks to the tungsten carbide blades, this cutterhead cuts effortlessly through solid boards, hard and soft woods, MDF or laminated boards. Equipped with knives with dimensions 14x14mm.
Available in diameter 140mm or 150mm.
Universal cutter head which can hold almost every profile knive currently available on the market. This cutter head can carry both profile knives of height 40mm or 50mm as well as replaceable and reversible knives up to height 50mm. Thanks to the pre-cutters at the top and bottom, your work always has a clean finish. Also suitable for rabbeting.
Remote control to be used with the Air Flux Cyclone Dust extractors Air Flux 2000CKH and Air Flux 3000CKH.
Deze boor- en uitloopfrees kan gebruikt worden om eenvoudig én snel openingen te maken in (houten) plaatmaterialen. De V-punt perforeert gemakkelijk de bovenlaag van gelamineerde panelen of fineerplaten. Dankzij de hardmetalen (widia) snijkop is een precieze afwerking van uw freeswerken te allen tijde gegarandeerd. De spits van de frees fungeert tijdens de bewerkingen als geleider.
Cutter head in light alloy with reversible blades in high quality tungsten carbide (HW). This cutter head was specifically made for manufacturing 45° mitre joints for furnitre, coffins or boards. The connection is made in two steps. The first half of the connection is cut horizontally. Cut the second half of the connection vertically along the guide. Thanks to the tungsten carbide blades, this grooving cutter cuts effortlessly through solid boards or solid woods. The cutter is also suitable for MDF.
The GuidePRO is an easy to install guide that serves as an aid to sawing. Finally a groundbreaking innovation that makes it easy and safer to cut quality and precision on a band saw or milling machine. Three easy steps for an accurate and fast installation, time after time. Miter Cam slides into the miter slot and easily swings into place for attachment.
There is no other tool like this!
Kreg Blue-Kote pocket-hole screws with a square drive. The screw has a length of 64 mm (2 1/2″) and a coarse thread, which makes it ideally suited for softwood.
The blue Kreg screws have a triple coating that makes the screw corrosion resistant. Therefore, the screws are excellent for outdoor or humid areas.
This screw is available in packages of 50, 125 and 250 pieces.
Cette fraise est conçue pour fraiser facilement et rapidement des bords droits ou des rainures. Grâce à ses tranchants en carbure de haute qualité (widia), cette fraise peut être utilisée sur la plupart des types de bois. Facile à utiliser en utilisant le roulement à billes comme guide. Cette fraise est parfaitement adapté au traitement des matériaux stratifiés ou des feuilles de placage.
Set profielmessen hoogte 40mm Nr. 0006 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
Porte outils d'une hauteur de 90 mm pour utilisation sur des fraiseuses à broche de 30 mm. Cette tête peut être utilisée avec tous nos couteaux de profil de hauteur 90 mm. Ces hauts profils sont principalement utilisés pour le fraisage des lambris, des corniches ou des profils de toit.
The BELMASH PC 3000 panel carrier is designed to facilitate work with large workpieces (plywood, laminated chipboard, MDF, etc.).
Thanks to the robust and mobile design of the panel carrier, workpieces up to a thickness of 40 mm can be easily moved to the machine or workbench. The panel carrier is equipped with swivel castors, an adjustable height and is tiltable (vertically - horizontally) by means of a convenient click system. The adjustable height of this plate carrier means that it can be used on all machines and/or work tables. By adjusting it to the right height and placing it behind a machine, it can also be used as a table-top output.
The design of the panel carrier allows panels weighing up to 100 kg to be moved by one person, which significantly increases productivity and reduces costs.
Universeel links-rechts getand zaagblad geschikt voor het verzagen van verschillende houtsoorten of houten platen. Kies voor het juiste aantal tanden voor een optimaal resultaat van uw project. Een laag aantal tanden is geschikt voor snel en ruw zaagwerk in massief hout. Een hoog aantal tanden behoeft een tragere zaagsnelheid maar zorgt voor een fijne en zuivere zaagsnede in zowel massief hout als plaatmateriaal. Verkrijgbaar met verschillend aantal tanden.
Bandsaw blade with length 3607mm for use on the TT500X band saw machine from Tendotools. This saw blade has 14 TPI (teeth per inch) and has a width of 27mm. This bimetal bandsaw blade is very strong and, in addition to wood or plastics, is even suitable for sawing light metal alloys or, for example, aluminium. It is also advisable to use these saw blades for long-term use on hard woods.
Hardmetalen ketting met widia tanden voor mobiele kettingzaag voor cellenbeton MCS400.
Set profielmessen hoogte 40mm Nr. 0024 voor universele veiligheidsmessenkoppen. Geschikt voor het profielfrezen van massief houten kanten met heel lage gereedschapskosten. Gelegeerd gereedschapsstaal met 16% cobalt voor een hoge snijkwaliteit en snijcomfort.
The combination machines of our Revolution line are among the absolute top segment thanks to their robust construction and the use of extremely solid materials.
The Combi TT320K5 Massif has a heavy welded steel frame with cast iron tables. The machine is equipped with three separate motors. It is equipped with a wide anodized sliding table of 1500 mm.
The large saw blade is suitable for cross-cutting, mitre sawing, solid work… The saw is equipped with a large right-hand saw guide. The heavy-duty saw arm is mounted on a double support arm. A large right-hand saw guide is fitted as a standard. A 1 HP scoring unit with separate motor is also available as an option.
The 2-speed milling spindle has a large table opening and is equipped with several insert rings. A chip outlet is provided on the multi-adjustable milling cover and at the bottom of the milling table. The milling machine is further equipped with wide anodized milling guides.
The large cast iron planing tables have a long, angled adjustable anodized planing guide. The thicknesser has a large throughput height. The motorized throughput can be disabled. The planing and thicknessing table has a large flip-up cover for chip removal.
A mortiser with (left-turning) Westcott chuck is also provided as a standard.
The Kreg Top Trak is an aluminium track that can be easily attached to an existing fence. Due to the L-shape, the track fits well to the existing fence. Drill Ø 3 mm holes on the back and attach with the screws provided. Length 1219 mm (48"). Suitable for use with 6 and 6.3 mm bolts.
For use as an extension for the KMS8000 precision cutting rail from Kreg.
Also available in 610 mm length.
Ce chariot de transport auto-serrant est la solution pour transporter facilement des portes, des cadres, des panneaux, etc. dans le secteur du bâtiment et dans les ateliers. Il a une capacité de charge allant jusqu'à 200 kg. Lorsque le matériau est placé dans l'Easy Roller, il serre automatiquement le matériau lui-même en raison de son effet d'articulation. Ce qui était autrefois porté avec deux personnes ne peut désormais être fait qu'avec l'Easy Roller, ce qui évite une tension physique excessive sur le corps. L'Easy Roller a une couche de protection robuste pour éviter d'endommager le matériau à transporter.
Replacement waste bags PVC 120µm to be used with the Air Flux 3000CKH Cyclone. These bags are to be used underneath the filter.
Deze compacte combinatiemachine uit de Hobby+ Series is een absolute topper binnen zijn prijsklasse. De ideale machine voor elke houtbewerker die thuis, of in een kleine werkplaats aan de slag gaat. Opgebouwd uit twee verschillende machines biedt deze Combi Workcentre u drie functies: verzagen, frezen en vlak- en vandikte. Elke functie wordt aangedreven met behulp van een aparte 230V inductiemotor. De zaagtafel is voorzien van een afkortwagen met telescopische geleider met flipstop, fijnregeling en een snelkleminrichting. Het zaagblad is kantelbaar tot 45° om te verzagen onder hoek. Deze afkortwagen kan u ook gebruiken als pennenwagen voor de freestafel.
Freestafel
De freesmachine (met as Ø30mm) is instelbaar op drie snelheden. De laagste snelheid is voornamelijk aangewezen voor zwaar freeswerk, zoals bijvoorbeeld pennen slaan. Bij hogere snelheden kan dit type werk een 'helikoptereffect' hebben, waarbij de frees opstijgt. De hogere snelheden lenen zich dan weer uitstekend voor profileren. Stel dus steeds de juiste snelheid in afhankelijk van het type materiaal en het type werk dat u uitvoert. De freestafel beschikt over een freeskap zodat u altijd veilig kan werken.
Vlak- en vandiktebank
Daarnaast biedt deze combinatiemachine u ook een krachtige, vlak- en vandiktebank. Dankzij het stevige, stalen design met gietijzeren werkbladen is deze machine bestand tegen zwaar dagelijks gebruik. De werktafels zijn onderaan voorzien van een zwaar profiel om de vlakheid te allen tijde te behouden. De tafels scharnieren onafhankelijk van elkaar en kunnen omhoog geplaatst worden. Op deze manier kan u maximaal gebruik maken van de capaciteiten van de vandiktebank.
Om erg precies te kunnen schaven is deze machine bovenaan voorzien van een stevige, aluminium geleider. Deze geleider kan ingesteld worden onder hoek met twee stops voor 90° en 45°. Met behulp van de zware schaafas, voorzien van drie schaafbeitels, is een goede afwerking steeds gegarandeerd. Het afvoeren van de spaanders gebeurt via een scharnierende kap. Deze kap kan aangesloten worden op een stofafzuiging met behulp van de uitlaat met Ø100mm.
Deze combinatiemachine kan opgedeeld worden in twee delen. Op deze manier kan u apart gebruiken van de zaagtafel + freesmachine en van de vlak- en vandiktebank.
Weight
0,05 kg
32 kg
1 kg
1 kg
0,5 kg
0,05 kg
1 kg
2 kg
0,25 kg
0,05 kg
0,05 kg
1 kg
27 kg
1 kg
0,5 kg
1 kg
0,05 kg
250 kg
N/B
4,5 kg
0,5 kg
250 kg
Dimensions
0,4 cm
N/B
N/B
N/B
N/B
N/B
N/B
N/B
N/B
N/B
0,4 cm
9 cm
159 × 61,4 × 115 cm
N/B
N/B
N/B
0,4 cm
N/B
121,9 cm
N/B
N/B
N/B
Additional information
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
32 kg
Telescopische arm
adjustable between 90 cm and 175 cm
Diameter afzuiging
100 mm
Hoogte boven het werkblad
34,5 cm
Gewicht
1 kg
Diameter
140mm, 150mm
As diameter
30mm
Snijvlakken
4
Aantal tanden
4
Freeshoogte
14-28mm
Gewicht
1 kg
Diameter
120mm
As diameter
50mm
Freeshoogte
50mm
Gewicht
0,5 kg
Gewicht
0,05 kg
Diameter
8mm
Snijlengte
19mm
Lengte
63mm
Snijvlakken
1+1
Schacht
8mm
Gewicht
1 kg
Diameter
140mm
As diameter
30mm
Snijvlakken
2
Freeshoogte
32mm
Toerental Min-Max
5000-9500
Gewicht
2 kg
Gewicht
0,25 kg
Stuks in verpakking
50, 125, 250
Materiaal
Blue-Kote
Gewicht
0,05 kg
Diameter
6,4mm
Snijlengte
19mm
Lengte
57mm
Schacht
8mm
Snijvlakken
1
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
1 kg
Afmetingen
9 cm
Diameter
100mm
As diameter
30mm
Freeshoogte
100mm
Gewicht
27 kg
Afmetingen
159 × 61,4 × 115 cm
Draagvermogen
100 kg
Gewicht
1 kg
Zaagblad diameter
180mm
As diameter
20mm
Tand dikte
2,6mm
Zaagblad dikte
1,6mm
Aantal tanden
24, 40, 56
Meeneemgaten
2/6/32
Gewicht
0,5 kg
Lengte
3607mm
Breedte
27mm
Dikte
0,90mm
Gewicht
1 kg
Ketting
Hard metalen tanden
Gewicht
0,05 kg
Afmetingen
0,4 cm
Gewicht
250 kg
Motor
4,3 PK
Voltage
3 x 400V
Werktafel (zagen/frezen)
1100 x 155 mm
Sliding tafel
760 x 500 mm
Sliding lengte
2000 mm
Freeshoogte
125 mm
Freesopening
250 mm
As diameter
30mm
Nominale snelheid (frezen)
3500 rpm, 7000 rpm
Ø Zaagblad
255-315 mm
Zaagdiepte 45°
43-65 mm
Zaagdiepte 90°
63-90 mm
Nominale snelheid (zagen)
4260 rpm
Ø Voorritser
150 mm
Nominale snelheid (voorritser)
8300 rpm
Werktafel (schaven)
1400 x 320 mm
Schaafbreedte
320 mm
Max. schaafdiepte
5 mm
Werktafel (vandikte)
600 x 316 mm
Max. afname vandikte
3 mm
Doorlaathoogte vandikte
3-230 mm
Aanvoersnelheid vandikte
6 m/min
Boorkop
16 mm
Boortafel
250 x 370 mm
Afmetingen
121,9 cm
Gewicht
4,5 kg
Draagvermogen
200 kg
Max. klemdikte
120 mm
Materiaal
acier de 2,5 mm d'épaisseur, roues pneumatiques
Gewicht
0,5 kg
Gewicht
250 kg
Motor
1.5 PK, 2 PK
Voltage
230 V
Werktafel (zagen/frezen)
940x410mm
Afkortwagen tafel
400x250mm
Afkortwagen lengte
1000mm
Freeshoogte
76,5mm
Freesopening
140mm
As diameter
30mm
Nominale snelheid (frezen)
4500rpm, 6500rpm, 8500rpm
Zaagdiepte 45°
40mm
Zaagdiepte 90°
60mm
Nominale snelheid (zagen)
4750rpm
Werktafel (schaven)
1085×256
Schaafbreedte
250mm
Max. schaafdiepte
3mm
Werktafel (vandikte)
600x258mm
Max. afname vandikte
2mm
Doorlaathoogte vandikte
5-180mm
Aanvoersnelheid vandikte
5m/min
Nominale snelheid (schaafas)
4000rpm
Meld je aan voor onze nieuwsbrief
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Vergelijken
We gebruiken cookies om ervoor te zorgen dat onze website zo soepel mogelijk draait. Als je doorgaat met het gebruiken van de website, gaan we er vanuit dat je ermee instemt.OkPrivacy policy